FA811818R0047.pdf

STANDARD FORM 1447 (2/2012)

Prescribed by GSA FAR (48 CFR) 53.215-1(d)

4. SOLICITATION NUMBER

FA8118-18-R-0047

X

6.SOLICITATION ISSUE DATE

23 AUG 2018

8. THIS ACQUISITION IS UNRESTRICTED OR SET ASIDE: % FOR

SMALL BUSINESS WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOSB PROGRAM

HUBZONE SMALL

BUSINESS EDWOSB

SERVICE-DISABLED VETERAN-

OWNED SMALL BUSINESS NAICS CODE: 336413

8(A) SIZE STANDARD: 1250

DATE SIGNED

28. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

26. AWARD OF CONTRACT: YOUR OFFER ON SOLICITATION NUMBER

SHOWN IN BLOCK 4 INCLUDING ANY ADDITIONS OR CHANGES WHICH

ARE SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

Subject to the terms and conditions stated herein, the Contractor agrees to hold its offered prices firm for 120 days.

SEE LINE ITEM SCHEDULE

22.

AMOUNT

16. AUTHORITY FOR USING OTHER THAN 10 USC 2304 41 USC 253

FULL AND OPEN COMPETITION (c) ( ) (c) ( )

DATE SIGNED

27. SIGNATURE OF OFFEROR/CONTRACTOR

20.

UNIT

21.

UNIT PRICE

19.

QUANTITY

13. CONTRACTOR OFFEROR CODE FACILITY CODE

11. IF OFFER IS ACCEPTED BY THE GOVERNMENT WITHIN * ___ CALENDAR DAYS (60 CALENDAR

DAYS UNLESS OFFEROR INSERTS A DIFFERENT PERIOD) FROM THE DATE SET FORTH IN BLK 9

ABOVE, THE CONTRACTOR AGREES TO HOLD ITS OFFERED PRICES FIRM FOR THE ITEMS

SOLICITED HEREIN AND TO ACCEPT ANY RESULTING CONTRACT SUBJECT TO THE TERMS AND

CONDITIONS STATED HEREIN. *120

RATING

DO: A1

3. AWARD/EFFECTIVE DATE

FA8118

2. CONTRACT NO.

X

CHECK IF REMITTANCE IS DIFFERENT

AND PUT SUCH ADDRESS IN OFFER

17.

ITEM NO.

12. ADMINISTERED BY CODE

Total

SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK: 14 EFT:T

SCD:B

NAME AND TITLE OF SIGNER (TYPE OR PRINT) NAME OF CONTRACTING OFFICER

24. AWARD AMOUNT (FOR GOVT USE ONLY)

23. ACCOUNTING AND APPROPRIATION DATA

SEE SCHEDULE

5. SOLICITATION TYPE

SEALED BIDS NEGOTIATED

(IFB) (RFP)

15. PROMPT PAY DISCOUNT

25. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN 1

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SETFORTH

OR OTHERWISE IDENTIFIED ABOVE AND ON ANY CONTINUATION SHEETS SUBJECT

THE TERMS AND CONDITIONS SPECIFIED HEREIN.

10. ITEMS TO BE PURCHASED (BRIEF DESCRIPTION)

SUPPLIES SERVICES Other Aircraft Part and Auxiliary Equipment Manufacturing

9.

LATE OFFERS ARE SUBJECT TO LATE PROPOSAL PROVISIONS INCORPORATED HEREIN. ALL OFFERS ARE SUBJECT TO SUCH PROVISIONS, REPRESENTATIONS, CERTIFICATIONS AND SPECIFICATIONS AS ARE ATTACHED OR INCORPORATED BY REFERENCE.

SOLICITATION: OFFERS WILL BE RECEIVED AT THE ISSUING OFFICE UNTIL

24-SEP-2018 3:00PM

18.

SCHEDULE OF SUPPLIES/SERVICES

14. PAYMENT WILL BE MADE BY CODE

(SEE ESP CLAUSE 252.232-7003.)

X

7. ISSUED BY CODE

DEPARTMENT OF THE AIR FORCE, AFSC PZABB

3001 STAFF DR STE 1AC4 99A

TINKER AFB OK 73145-3303

BUYER: Beth Orton/AFSC/PZABB beth.orton@us.af.mil Phone: (405) 734- 0255 Fax: (000 No Collect Calls

X

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 350)SOLICITATION/CONTRACT

BIDDER/OFFEROR TO COMPLETE BLOCKS 11, 13, 15, 21, 22, & 27.

J

SF 1447 (rev 2/2012) BACK

NO RESPONSE FOR THE REASONS CHECKED

TYPE OR PRINT NAME AND TITLE OF SIGNER

SIGNATURENAME AND ADDRESS OF FIRM (Include Zip Code)

WE DO NOT DESIRE TO BE RETAINED ON THE MAILING LIST FOR FUTURE PROCUREMENT OF THE TYPE OF

ITEMS INVOLVED

WE DO

OTHER (Specify)

CANNOT COMPLY WITH SPECIFICATIONS

CANNOT COMPLY WITH SPECIFICATIONS CANNOT MEET DELIVERY REQUIREMENT

FOLD

FOLD

SOLICITATION NO. FA811818R0047

DUE: 24 SEP 2018 3:00 PM

FROM: AFFIX

STAMP

HERE

TO:

ATTN: Beth Orton/AFSC/PZABB

DEPARTMENT OF THE AIR FORCE, AFSC PZABB

3001 STAFF DR STE 1AC4 99A

TINKER AFB OK 73145-3303

FA8118-18-R-0047

PART I - THE SCHEDULE

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

(a) Remanufacture is the action taken to return the end item to a like-new condition as set forth in FAR 22.1003-6(a)(1).

The contractor shall furnish all material, plant facilities, labor, parts, equipment, and expertise necessary to perform the remanufacture required to restore the pieces(s) of equipment to original life expectancy, or nearly so. The contractor shall also accomplish all necessary packing and preservation and packaging and return to the Government in completely serviceable condition, at the unit price(s) established at the time of award, the items of Air Force equipment listed below, all in accordance with the provision hereof and the Work Specifications in Section J hereof.

(b) A Pre-Award Survey and/or Initial Production Evaluation (IPE) may be required on each CLIN.

Details are provided in Appendix A, paragraphs 1.2 and 1.3 respectively.

(c) Qualification requirements apply. Interested vendors that have not been previously qualified for this acquisition must submit a Source Approval Request (SAR) package to the Source Development, Small Business Office @ 405-739-7243.

As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification.

(d) This acquisition may involve technology that has a military or space application. The only contractors who may participate are those that are certified and registered with the Defense Logistics Information Service (DLIS) (1-800-352-3572) and have a legitimate business purpose.

In order to receive any technical data related to this acquisition, offerors must be registered with Federal Business Opportunities (FedBizOpps) www.FBO.gov. Requests for data are to be submitted to ocalc.lgldo.public@us.af.mil for drawings and directly to the PCO and/or buyer for Technical Orders (TOs). The request shall be on company letterhead and include the applicable solicitation number and the specific data needed (e.g. TO number, drawing number).

The request must be accompanied by a copy of the current and approved DD Form 2345. The form, including instructions for completing the form, is available at:

http://www.dtic.mil/whs/directives/infomgt/forms/forminfo/forminfopage2220.html. The Government is not responsible for misdirected or untimely requests.

(e) Some units of items listed in Section B may, upon disassembly and/or inspection, be determined to be beyond the remanufacture limits specified in the Work Specification and/or Technical

Orders. Any cost for work performed by the Contractor, prior to determination that such equipment is beyond these limits, shall be included in the unit price(s) of the listed item(s).

(f) Condemned units shall not be counted as production.

(g) END ITEMS BEYOND REMANUFACTURE “Repairable End Items” are defined as end items which can be restored to a serviceable condition, in accordance with applicable requirements. If the Contractor estimates that any item is not reparable (i.e. beyond remanufacture), the Contractor shall promptly notify the administrative contracting officer (ACO). Upon written confirmation from the ACO that a particular item is not reparable, the contractor shall dispose of the unit in the manner directed by the ACO.

(h) Offerors must clearly identify all proposed deviations from the solicitation requirements and/or exceptions to the terms and conditions. Offerors must also provide complete rationale for all proposed deviations and/or exceptions. See section L, paragraph L-03(b) of INSTRUCTIONS, CONDITIONS, AND NOTICES TO RESPONDENTS FOR PROPOSAL PREPARATION USING LOWEST

PRICE TECHNICALLY ACCEPTABLE (LPTA) PROCEDURES.

(i) GOVERNMENT PROPERTY FURNISHED FOR REPAIR (FAR 16.50.3(c)) Failure of the Government to furnish such items in the amounts or quantities described in the Schedule as “estimated” or “maximum” will not entitle the contractor to any equitable adjustment in price under the Government Property clause of the contract.

ADDITIONAL OVER AND ABOVE WORK PROCEDURES Negotiations on proposed over and above work should be completed prior to commencement of work, but in no case later than the time when 40 percent of the work is completed. For fixed hourly rate items, the price negotiated by the Administrative Contracting Officer shall be based on “hands on” labor hours multiplied by the contract hourly rate. The number of “hands on” labor hours required shall be negotiated by the Contractor and Administrative contracting Officer. The fixed hourly rate included charges for “hands on” labor cost which is not considered “hands on” for which the Contractor accounts as direct labor, burdens, general and administrative expenses, and other allowable cost and profit. At any time during contract performance, the Contractor or the Procuring Contracting Officer may requires a negotiation to establish a fir-fixed price for that item for the remaining life of the contract. The Administrative Contracting Officer shall advise the Procuring Contracting Officer of all such agreements in order that changes can be incorporated in periodic contract modifications.

(j) This solicitation contemplates award of a 5 year Requirements contract, consisting of 1 basic year and 4 one-year options.

(k) This requirement is a TOTAL SMALL BUSINESS SET-ASIDE.

(l) Dates listed in clauses 252.216-7006 and 52.216-21 are based on the estimated award date.

These dates will be revised prior to award based on the actual award date.

REMANUFACTURE - ELECTRO-MECHANICAL ACTUATOR

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Total Estimated Cost

2 EA

CLIN ACRN ACRN Total

0001 AA

NSN: 1680-01-250-0275 RK

BASIC YEAR

ACTUATOR,ELECTRO-ME

Open/closes exhaust door and ram scoop for cooling of critical flight control systems.

Aluminum, steel Manufacturer Part Number 18441 R15040M1-2 43999 R15040M1-2 58078 R15040M1-2 81039 R15040M1-2 Associated Document(s) Line Item(s)

FD20301802620 0001

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Buy American Act/Balance of Payments Program IUID Required: Yes

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

B SW3211 ORIGIN

Type / Ship To PACRN Mark For

B SW3211 PAA ACCT 09

Type / Ship To Quantity (U/I) (2) ea every 30 days

ARO and reps Req No / Pri

Required Delivery

REMANUFACTURE - ELECTRO-MECHANICAL ACTUATOR

B SW3211 12 EA (2) ea every 30 days

ARO

Proposed Delivery

B SW3211 12 EA

OVER AND ABOVE

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA To be Negotiated

BASIC YEAR

Associated Document(s) Line Item(s)

FD20301802620 0002

Priority: R

IAW DFARS clause 252.217-7028 and SOW paragraph 2.2.2

Item No.

Not Separately Priced Quantity U/I Unit Price

1 LO NSP

BASIC YEAR

DATA

EXHIBIT ITEM NO.

RELATED

LINE ITEM

NO.

Data Item Description QTY UNIT UNIT

PRICE

TOTAL

PRICE

A A001 0001 CAV AF End Item Reporting 1 LO NSP NSP A A002 0001 Contract Depot Maintenance

(CDM) Production Report

1 LO NSP NSP

A A004 0001 Government Property Inventory Report

1 LO NSP NSP

NSP = NOT SEPARATELY PRICED

SEE DFARS 252.204-7002, Payment for Subline Items Not Separately Priced

The award of any or all reports shall be at the sole discretion of the Government. The Government reserves the right to delete from the bid price each line item of data and/or reports that the Government does not desire prior to and after final award.

Associated Document(s) Line Item(s)

FD20301802620 0003

Priority: R

REMANUFACTURE - ELECTRO-MECHANICAL ACTUATOR

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Total Estimated Cost

2 EA

CLIN ACRN ACRN Total

1001 AA

NSN: 1680-01-250-0275 RK

OPTION YEAR I

ACTUATOR,ELECTRO-ME

Open/closes exhaust door and ram scoop for cooling of critical flight control systems.

Aluminum, steel Manufacturer Part Number 18441 R15040M1-2 43999 R15040M1-2 58078 R15040M1-2 81039 R15040M1-2 Associated Document(s) Line Item(s)

FD20301802620 0001

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

IUID Required: Yes

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

B SW3211 ORIGIN

Type / Ship To PACRN Mark For

B SW3211 PAA ACCT 09

Type / Ship To Quantity (U/I) (2) ea every 30 days

ARO and reps Req No / Pri

Required Delivery

B SW3211 12 EA (2) ea every 30 days

ARO

Proposed

B SW3211 12 EA

OVER AND ABOVE

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA To be Negotiated

OPTION YEAR I

Associated Document(s) Line Item(s)

FD20301802620 0002

Not Separately Priced Quantity U/I Unit Price

1 LO NSP

OPTION YEAR I

DATA

EXHIBIT ITEM NO. RELATED

LINE ITEM

NO.

Data Item Description QTY UNIT UNIT

PRICE

TOTAL

PRICE

B B001 1001 CAV AF End Item Reporting 1 LO NSP NSP B B002 1001 Contract Depot Maintenance

(CDM) Production Report

1 LO NSP NSP

B B004 1001 Government Property Inventory Report

1 LO NSP NSP

NSP = NOT SEPARATELY PRICED

SEE DFARS 252.204-7002, Payment for Subline Items Not Separately Priced

The award of any or all reports shall be at the sole discretion of the Government. The Government reserves the right to delete from the bid price each line item of data and/or reports that the Government does not desire prior to and after final award.

Associated Document(s) Line Item(s)

FD20301802620 0003

Priority: R

REMANUFACTURE - ELECTRO-MECHANICAL ACTUATOR

Item No.

Firm Fixed Price

REMANUFACTURE - ELECTRO-MECHANICAL ACTUATOR

Best Estimated Qty

U/I Unit Price Total Estimated Cost

2 EA

CLIN ACRN ACRN Total

2001 AA

NSN: 1680-01-250-0275 RK

OPTION YEAR II

ACTUATOR,ELECTRO-ME

Open/closes exhaust door and ram scoop for cooling of critical flight control systems.

Aluminum, steel Manufacturer Part Number 18441 R15040M1-2 43999 R15040M1-2 58078 R15040M1-2 81039 R15040M1-2 Associated Document(s) Line Item(s)

FD20301802620 0001

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

IUID Required: Yes

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

B SW3211 ORIGIN

Type / Ship To PACRN Mark For

B SW3211 PAA ACCT 09

Type / Ship To Quantity (U/I) (2) ea every 30 days

ARO and reps Req No / Pri

Required Delivery

B SW3211 12 EA (2) ea every 30 days

ARO

Proposed

OVER AND ABOVE

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA To be Negotiated

OPTION YEAR II

Associated Document(s) Line Item(s)

FD20301802620 0002

Not Separately Priced Quantity U/I Unit Price

1 LO NSP

OPTION YEAR II

DATA

EXHIBIT ITEM NO. RELATED

LINE ITEM

NO.

Data Item Description QTY UNIT UNIT

PRICE

TOTAL

PRICE

C C001 2001 CAV AF End Item Reporting 1 LO NSP NSP C C002 2001 Contract Depot Maintenance

(CDM) Production Report

1 LO NSP NSP

C C004 2001 Government Property Inventory Report

1 LO NSP NSP

NSP = NOT SEPARATELY PRICED

SEE DFARS 252.204-7002, Payment for Subline Items Not Separately Priced

The award of any or all reports shall be at the sole discretion of the Government. The Government reserves the right to delete from the bid price each line item of data and/or reports that the Government does not desire prior to and after final award.

Associated Document(s) Line Item(s)

FD20301802620 0003

Priority: R

REMANUFACTURE - ELECTRO-MECHANICAL ACTUATOR

Item No.

REMANUFACTURE - ELECTRO-MECHANICAL ACTUATOR

Best Estimated Qty

U/I Unit Price Total Estimated Cost

2 EA

CLIN ACRN ACRN Total

3001 AA

NSN: 1680-01-250-0275 RK

OPTION YEAR III

ACTUATOR,ELECTRO-ME

Open/closes exhaust door and ram scoop for cooling of critical flight control systems.

Aluminum, steel Manufacturer Part Number 18441 R15040M1-2 43999 R15040M1-2 58078 R15040M1-2 81039 R15040M1-2 Associated Document(s) Line Item(s)

FD20301802620 0001

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

IUID Required: Yes

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

B SW3211 ORIGIN

Type / Ship To PACRN Mark For

B SW3211 PAA ACCT 09

Type / Ship To Quantity (U/I) (2) ea every 30 days

ARO and reps Req No / Pri

Required Delivery

B SW3211 12 EA (2) ea every 30 days

ARO

Proposed

OVER AND ABOVE

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA To be Negotiated

OPTION YEAR III

Associated Document(s) Line Item(s)

FD20301802620 0002

Not Separately Priced Quantity U/I Unit Price

1 LO NSP

OPTION YEAR III

DATA

EXHIBIT ITEM NO. RELATED

LINE ITEM

NO.

Data Item Description QTY UNIT UNIT

PRICE

TOTAL

PRICE

D D001 3001 CAV AF End Item Reporting 1 LO NSP NSP D D002 3001 Contract Depot Maintenance

(CDM) Production Report

1 LO NSP NSP

D D004 3001 Government Property Inventory Report

1 LO NSP NSP

NSP = NOT SEPARATELY PRICED

SEE DFARS 252.204-7002, Payment for Subline Items Not Separately Priced

The award of any or all reports shall be at the sole discretion of the Government. The Government reserves the right to delete from the bid price each line item of data and/or reports that the Government does not desire prior to and after final award.

Associated Document(s) Line Item(s)

FD20301802620 0003

Priority: R

REMANUFACTURE - ELECTRO-MECHANICAL ACTUATOR

Item No.

REMANUFACTURE - ELECTRO-MECHANICAL ACTUATOR

Best Estimated Qty

U/I Unit Price Total Estimated Cost

2 EA

CLIN ACRN ACRN Total

4001 AA

NSN: 1680-01-250-0275 RK

OPTION YEAR IV

ACTUATOR,ELECTRO-ME

Open/closes exhaust door and ram scoop for cooling of critical flight control systems.

Aluminum, steel Manufacturer Part Number 18441 R15040M1-2 43999 R15040M1-2 58078 R15040M1-2 81039 R15040M1-2 Associated Document(s) Line Item(s)

FD20301802620 0001

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

IUID Required: Yes

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

B SW3211 ORIGIN

Type / Ship To PACRN Mark For

B SW3211 PAA ACCT 09

Type / Ship To Quantity (U/I) (2) ea every 30 days

ARO and reps Req No / Pri

Required Delivery

B SW3211 12 EA (2) ea every 30 days

ARO

Proposed

OVER AND ABOVE

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA To be Negotiated

OPTION YEAR IV

Associated Document(s) Line Item(s)

FD20301802620 0002

Not Separately Priced Quantity U/I Unit Price

1 LO NSP

OPTION YEAR IV

DATA

EXHIBIT ITEM NO. RELATED

LINE ITEM

NO.

Data Item Description QTY UNIT UNIT

PRICE

TOTAL

PRICE

E E001 4001 CAV AF End Item Reporting 1 LO NSP NSP E E002 4001 Contract Depot Maintenance

(CDM) Production Report

1 LO NSP NSP

E E004 4001 Government Property Inventory Report

1 LO NSP NSP

NSP = NOT SEPARATELY PRICED

SEE DFARS 252.204-7002, Payment for Subline Items Not Separately Priced

The award of any or all reports shall be at the sole discretion of the Government. The Government reserves the right to delete from the bid price each line item of data and/or reports that the Government does not desire prior to and after final award.

Associated Document(s) Line Item(s)

FD20301802620 0003

SHIP TO / PLACE OF PERFORMANCE

TYPE/CODE: B SW3211

DLA DISTRIBUTION DEPOT OKLAHOMA

3301 F AVE CEN REC

BLDG 506 DR 22

TINKER AFB OK 73145-8000

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

Ship To and Mark For shall be determined by the Production Management Specialist, Erik Mortenson, (405) 232-2687 or erik.mortenson@us.af.mil. When repaired Government Property is ready for shipment, the contractor shall call the Production Management Specialist for disposition instructions. Instructions shall be provided by facsimile, e-mail or other electronic means.

PART I - THE SCHEDULE

SECTION E

INSPECTION AND ACCEPTANCE

52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)

(IAW FAR 46.302)

(Applicable for supplies, services furnishing of supplies, fixed-price and exceeds the simplified acquisition threshold)

52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)

(IAW FAR 46.311, DFARS 246.202-4(1))

(a) The Contractor shall comply with the higher-level quality standard(s) listed below. [If more than one standard is listed, the offeror shall indicate its selection by checking the appropriate block.]*

Title Number Date Tailoring *See Individual Line Item Schedule

(Applicable only if specified in the individual order/call issued hereunder)

52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984)

(IAW FAR 46.316)

(Applicable to the furnishing of supplies, services involving the furnishing of supplies, or research and development, when a fixed-price contract is contemplated and the contract amount is expected to exceed the simplified acquisition threshold)

252.246-7000 MATERIAL INSPECTION AND RECEIVING REPORT (MAR 2008)

(IAW DFARS 246.370)

(Applicable for deliverable supplies or hardware)

INSPECTION AND ACCEPTANCE (SEP 1999)

(IAW FAR 46.401(b), FAR 46.503) (Applicable to all orders issued hereunder)

Government Contract Quality Assurance Inspection and Acceptance will be at (Final):

[CONTRACTOR FILL-IN]

Item No(s): See schedule for items with the following code(s) listed below :

Inspection Code and Address:

PART I - THE SCHEDULE

SECTION F

DELIVERIES OR PERFORMANCE

52.211-17 DELIVERY OF EXCESS QUANTITIES (SEP 1989)

(IAW FAR 11.703(b)) (Applicable when fixed-price supplies are furnished)

52.242-15 STOP-WORK ORDER (AUG 1989)

(IAW FAR 42.1305(b)(1)) (Applicable for supplies, services, or research and development)

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984)

(IAW FAR 42.1305(c)) (Applicable to fixed-price for supplies other than commercial or modified-commercial items)

52.247-29 F.O.B. ORIGIN (FEB 2006)

(IAW FAR 47.303-1(c)) (Applicable when specifying f.o.b. origin)

52.247-65 F.O.B. ORIGIN, PREPAID FREIGHT--SMALL PACKAGE SHIPMENTS (JAN 1991)

(IAW FAR 47.303-17(f)) (Applicable when specifying f.o.b. origin)

F.O.B. ORIGIN (OCT 1993)

(IAW FAR 47.305(b)) Any supply item applicable to this document shall be delivered F.O.B. at:

F.O.B. Address

[CONTRACTOR FILL-IN]

(Applicable when delivery term is f.o.b. origin)

PART I - THE SCHEDULE

SECTION G

CONTRACT ADMINISTRATION DATA

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(IAW DFARS 232.7004(b), PGI 232.7004(b)(1), DFARS 212.301(f)(liii))

(a) Definitions. As used in this clause— “Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow

(WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov ; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/ .

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

_Invoice and Receiving Report________________________________________ Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

_Source__________________________________________________________

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC PG 1, Block 14 Issue By DoDAAC FA8118 Admin DoDAAC PG 1, Block 12

Inspect By DoDAAC Cognizant DCMA Office DoDAAC Ship To Code See Schedule Ship From Code Contractor Facility Code Mark For Code See Schedule Service Approver (DoDAAC) N/A Service Acceptor (DoDAAC) N/A Accept at Other DoDAAC N/A LPO DoDAAC N/A DCAA Auditor DoDAAC N/A Other DoDAAC(s) N/A

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g.

timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

__erik.mortenson@us.af.mil ___________________________________

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

_patricia.anderson@tinker.af.mil________________________________

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(The above Clause/Provision has been modified.)

(Applicable when 252.232-7003 is used and neither 232.7003(b) nor (c) apply)

ACCOUNTING AND APPROPRIATION DATA (AUG 1998)

Accounting and Appropriation Chargeable ACRN Funds Citation Amount Chargeable

AA TO BE CITED ON EACH INDIVIDUAL ORDER $0.00

ACRN TOTAL $ 0.00

PART II - CONTRACT CLAUSES

SECTION I

CONTRACT CLAUSES

5352.201-9101 OMBUDSMAN (JUN 2016)

(IAW AFFARS 5301.9103)

(c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, AFSC/PZC at 405 736 -3273 , FAX 000 000 -0000 , email . Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431.

(Applicable to all solicitations and contracts)

52.202-1 DEFINITIONS (NOV 2013)

(IAW FAR 2.201)

(Applicable when the simplified acquisition threshold is exceeded)

52.203-3 GRATUITIES (APR 1984)

(IAW FAR 3.202)

(Applicable when simplified acquisition threshold is exceeded, except for personal services and those between military departments or defense agencies and foreign governments that do not obligate any funds appropriated to the Department of Defense)

52.203-5 COVENANT AGAINST CONTINGENT FEES (MAY 2014)

(IAW FAR 3.404)

(Applicable when simplified acquisition threshold is exceeded other than those for commercial items (see Parts 2 and 12))

52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (SEP 2006)

(IAW FAR 3.503-2)

52.203-7 ANTI-KICKBACK PROCEDURES (MAY 2014)

(IAW FAR 3.502-3)

52.203-8 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR

IMPROPER ACTIVITY (MAY 2014)

(IAW FAR 3.104-9(a))

(Applicable when noncommercial and the simplified acquisition threshold is exceeded)

52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY (MAY 2014)

(IAW FAR 3.104-9(b))

52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS

(OCT 2010)

(IAW FAR 3.808(b))

(Applicable over $150,000)

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS OR STATEMENTS (JAN 2017)

(IAW FAR 3.909-3 (b))

(Applicable in all solicitations and resultant contracts other than personal services contracts with individuals)

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS

(SEP 2011)

(IAW DFARS 203.171-4(a), DFARS 212.301(f)(ii))

252.203-7001 PROHIBITION ON PERSONS CONVICTED OF FRAUD OR OTHER

DEFENSE-CONTRACT-RELATED FELONIES (DEC 2008)

(IAW DFARS 203.570-3)

(Applicable when exceeding the simplified acquisition threshold (except for commercial items))

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS

(SEP 2013)

(IAW DFARS 203.970)

52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON RECYCLED PAPER (MAY 2011)

(IAW FAR 4.303)

52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT

AWARDS (OCT 2016)

(IAW FAR 4.1403(a))

(Applicable over $30,000, unless not required to be reported in FPDS)

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2016)

(IAW FAR 4.1105(b)) (Applicable to solicitations that contain the provision at 52.204-7, and resulting contracts)

52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (JUL 2016)

(IAW FAR 4.1804(c), FAR 12.301(d)) (Applicable when there is a requirement to be registered in SAM or to have a DUNS Number)

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS

(DEC 2014)

(IAW FAR 4.1202(b))

52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS

(JUN 2016)

(IAW FAR 4.1903)

(Applicable to all solicitations and contracts, except COTs, when a contractor’s system may contain Federal contract information)

52.204-23 PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES

DEVELOPED OR PROVIDED BY KASPERSKY LAB AND OTHER COVERED

ENTITIES (JUL 2018)

(IAW FAR 4.2004)

52.204-23 BASIC AGREEMENT APPLICABILITY (JUL 2018)

252.204-7002 PAYMENT FOR SUBLINE ITEMS NOT SEPARATELY PRICED (DEC 1991)

(IAW DFARS 204.7104-1(b)(3)(iv)) (Applicable to all not separately priced subline items)

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992)

(IAW DFARS 204.404-70(b))

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT

REPORTING (OCT 2016)

(IAW DFARS 204.7304(c))

(Applicable to all solicitations and contracts, including commercial except when solely for commercial-off-the-shelf items)

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION

SUPPORT (MAY 2016)

(IAW DFARS 204.7403(c), DFARS 212.301(f)(ix))

(Applicable to solicitations and contracts that involve litigation support services when 252.204-7014 is not included)

52.209-1 QUALIFICATION REQUIREMENTS (FEB 1995)

(IAW FAR 9.206-2)

(b)

Item No Agency Name/Address

0001 AFSC/SB

3001 STAFF DR STE 1AG85A

TINKER AFB, OK 73135-3009

1001 AFSC/SB

3001 STAFF DR STE 1AG85A

TINKER AFB, OK 73135-3009

2001 AFSC/SB

3001 STAFF DR STE 1AG85A

TINKER AFB, OK 73135-3009

3001 AFSC/SB

3001 STAFF DR STE 1AG85A

TINKER AFB, OK 73135-3009

4001 AFSC/SB

3001 STAFF DR STE 1AG85A

TINKER AFB, OK 73135-3009

(c) If an offeror, manufacturer, source, product or service covered by a qualification requirement has already met the standards specified, the relevant information noted below should be provided.

Offeror's Name _____________________________

Manufacturer's Name ________________________

Source's Name _____________________________

Item Name _________________________________

Service Identification _________________________

Test Number _______________________________ (to the extent known)

(Applicable when the acquisition is subject to a qualification requirement)

52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT

(OCT 2015)

(IAW FAR 9.409)

(Applicable when exceeding $35,000)

52.209-10 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS

(NOV 2015)

(IAW FAR 9.108-5(b))

(Applicable to all solicitations and contracts for the acquisition of products and services (including construction) unless waived

IAW FAR 9.108-4)

252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE

GOVERNMENT OF A COUNTRY THAT IS A STATE SPONSOR OF TERRORISM

(OCT 2015)

(IAW DFARS 209.409)

(Applicable to solicitations and contracts with a value of $150,000 or more)

52.211-5 MATERIAL REQUIREMENTS (AUG 2000)

(IAW FAR 11.304)

(Applicable to supplies that are not commercial items)

52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008)

(IAW FAR 11.604(b)) This is a rated order certified for national defense , emergency preparedness, and energy program use, and the Contractor shall follow all the requirements of the Defense Priorities and Allocations System regulation (15 CFR 700).

(Applicable to all rated orders)

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(IAW DFARS 211.274-6(a)(1), DFARS 212.301(f)(xii))

(a) Definitions. As used in this clause—

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid/equivalents.html .

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html .

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or Exhibit Line Item Number

Item Description

See Schedule as Applicable

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or Exhibit Line Item Number

Item Description

*Items less than $5000, which require UID, will be specifically identified in the schedule.

See Schedule as Applicable

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number _____( or See Schedule as Applicable).

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number _____( or See Schedule as Applicable).

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/ .

(2) Embedded items shall be reported by one of the following methods—

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number ______, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(Applicable when delivery of one or more “items” as defined at 252.211-7003(c) is required)

252.211-7007 REPORTING OF GOVERNMENT-FURNISHED PROPERTY (AUG 2012)

(IAW DFARS 211.274-6(b), DFARS 212.301(f)(iv)) (Applicable when FAR 52.245-1, Government Property, is used)

52.215-2 AUDIT AND RECORDS--NEGOTIATION (OCT 2010)

(IAW FAR 15.209(b)(1)) (Applicable if negotiated and above the simplified acquisition threshold, except commercial items and utility services at public prices plus reasonable connection charge)

52.215-8 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT (OCT 1997)

(IAW FAR 15.209(h), AFFARS 53.15.209(h)) (Applicable when using uniform contract format that is not commercial or for construction)

52.215-14 INTEGRITY OF UNIT PRICES (OCT 2010)

(IAW FAR 15.408(f)(1)) (Applicable when negotiated and exceeding the simplified acquisition threshold)

52.216-19 ORDER LIMITATIONS (OCT 1995)

(IAW FAR 16.506(b))

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than quantity of 1, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor--

(1) Any order for a single item in excess of quantity of 10;

(2) Any order for a combination of items in excess of quantity of 10; or

(3) A series of orders from the same ordering office within 30 days that together call for quantities exceeding the limitation in subparagraph (b)(1) or (2) of this section.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.

(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 10 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

52.216-21 REQUIREMENTS (OCT 1995)

(IAW FAR 16.506(d)(1))

(f) the Contractor shall not be required to make any deliveries under this contract after 31-JAN-2024

252.216-7006 ORDERING (MAY 2011)

(IAW DFARS 216.506(a))

(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the contract schedule. Such orders may be issued from 30-NOV-2018 through 30-AUG-2023.

(Applicable to solicitations and contracts when a definite-quantity contract, a requirements contract, or an indefinite-quantity contract is contemplated)

52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000)

(IAW FAR 17.208(g))

(a) The Government may extend the term of this contract by written notice to the Contractor within 30 days ; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 30 days before the contract expires.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed five (5) years .

(Applicable when the inclusion of an option is appropriate and it is necessary to include any or all of the following: 1. A requirement that the Government must give the contractor a preliminary written notice of its intent to extend the contract; 2.

A statement that an extension of the contract includes an extension of the option; 3. A specified limitation on the total duration of the contract.)

252.217-7028 OVER AND ABOVE WORK (DEC 1991)

(IAW DFARS 217.7702)

52.219-4 NOTICE OF PRICE EVALUATION PREFERENCE FOR HUBZone SMALL BUSINESS

CONCERNS (OCT 2014)

(IAW FAR 19.1309(b))

(c) Waiver of evaluation preference.

__ Offeror elects to waive the evaluation preference.

(Applicable when exceeding the simplified acquisition threshold)

52.219-8 UTILIZATION OF SMALL BUSINESS CONCERNS (NOV 2016)

(IAW FAR 19.708(a)) (Applicable when exceeding the simplified acquisition threshold, except for personal service contracts or when performance is entirely outside of the United States and its outlying areas)

52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JUL 2013)

(IAW FAR 19.309(c))

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

The Contractor represents that it [ ] is, [ ] is not a small business concern under NAICS Code _____________ assigned to contract number ______________________________.

[Contractor to sign and date and insert authorized signer's name and title].

(Applicable in solicitations and contracts exceeding the micro-purchase threshold when the contract will be performed in the United States or its outlying areas)

52.222-19 CHILD LABOR--COOPERATION WITH AUTHORITIES AND REMEDIES (JAN 2018)

(IAW FAR 22.1505(b)) (Applicable for supplies that exceed the micro-purchase threshold)

52.222-21 PROHIBITION OF SEGREGATED FACILITIES (APR 2015)

(IAW FAR 22.810(a)(1)) (Applicable when exceeding $10,000, except those exempted by FAR 22.807 (b) which includes those for work to be performed outside the U.S. by employees who were not recruited within the U.S.)

52.222-26 EQUAL OPPORTUNITY (SEP 2016)

(IAW FAR 22.810(e))

52.222-35 EQUAL OPPORTUNITY FOR VETERANS (OCT 2015)

(IAW FAR 22.1310(a)(1), DFARS 222.1310(a)(1)) (Applicable when the expected value is $150,000 or more except when work is performed outside the United States by employees recruited outside the United States or the Director, Office of Federal Contract Compliance Programs, has waived, in accordance with 22.1305(b), all of the terms of the clause)

52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (JUL 2014)

(IAW FAR 22.1408(a)) (Applicable over $15,000 except when performance of work and recruitment of workers will occur outside the United States, Puerto Rico, the Northern Mariana Islands, American Samoa, Guam, the U.S. Virgin Islands, and Wake Island, or the agency head has waived, in accordance with 22.1403(a) or 22.1403(b) all the terms of the clause)

52.222-37 EMPLOYMENT REPORTS ON VETERANS (FEB 2016)

(IAW FAR 22.1310(b)) (Applicable when the expected value is $150,000 or more and workers were recruited within the United States)

52.222-40 NOTIFICATION OF EMPLOYEE RIGHTS UNDER THE NATIONAL LABOR

RELATIONS ACT (DEC 2010)

(IAW FAR 22.1605)

(Applicable to all solicitations and contracts except under the simplified acquisition threshold, for work performed exclusively outside the U.S., or covered in their entirety by an exemption granted by the Secretary)

52.222-50 COMBATING TRAFFICKING IN PERSONS (MAR 2015)

(IAW FAR 22.1705(a)(1))

52.223-6 DRUG-FREE WORKPLACE (MAY 2001)

(IAW FAR 23.505)

(Applicable when the simplified acquisition threshold is exceeded except if performance is entirely outside the U.S. and its outlying areas)

52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE

DRIVING (AUG 2011)

(IAW FAR 23.1105)

252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JUN 2013)

(IAW DFARS 223.7306, DFARS 212.301(f)(xxi)) (Applicable to solicitations and contracts for supplies, maintenance and repair services, or construction)

52.224-3 PRIVACY TRAINING (JAN 2017)

(IAW FAR 24.302(a)) (Applicable to all solicitations and contracts where contractor employees will have access to a system of records or personally identifiable information)

52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JUN 2008)

(IAW FAR 25.1103(a)) (Applicable to supplies or services involving the furnishing of supplies unless an exception applies)

252.225-7001 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM--BASIC (DEC 2017)

(IAW DFARS 225.1101(2)(i) and (2)(ii)) (Applicable except when an exception to the Buy American statute or Balance of Payments Program is known to apply, or if using the clause at 252.225-7021, Trade Agreements; or 252.225-7036, Buy American —Free Trade Agreements—Balance of Payments Program)

252.225-7002 QUALIFYING COUNTRY SOURCES AS SUBCONTRACTORS (DEC 2017)

(IAW DFARS 225.1101(3))

(Applicable if one of the following clauses are included: DFARS 252.225-7001, 252.225-7021 or 252.225-7036)

252.225-7012 PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (DEC 2017)

(IAW DFARS 225.7002-3(a)) (Applicable when exceeding the simplified acquisition threshold for food; clothing; tents, tarpaulins or covers; cotton and other natural fiber products; woven silk or woven silk blends; spun silk yarn for cartridge cloth; synthetic fabric, coated synthetic fabric; canvas products; wool; or any item of individual equipment (FSC 8465) manufactured from or containing such fibers, yarns, fabrics, or materials; to waste and byproducts of cotton or wool used in the production of propellants and explosives)

252.225-7013 DUTY-FREE ENTRY (MAY 2016)

(IAW DFARS 225.1101(4))

(Applicable to contracts requiring duty free entry of goods into the United States)

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013)

(IAW DFARS 225.7901-4)

52.227-1 AUTHORIZATION AND CONSENT (DEC 2007)

(IAW FAR 27.201-2(a)(1)) (Applicable except when both complete performance and delivery are outside the United States)

52.227-2 NOTICE AND ASSISTANCE REGARDING PATENT AND COPYRIGHT

INFRINGEMENT (DEC 2007)

(IAW FAR 27.201-2(b))

(Applicable when the simplified acquisition threshold is exceeded except when both complete performance and delivery are outside the United States unless supplies are ultimately to be shipped into one of those areas)

52.229-3 FEDERAL, STATE, AND LOCAL TAXES (FEB 2013)

(IAW FAR 29.401-3(a)) (Applicable to fixed-price competitive contracts exceeding the simplified acquisition threshold, and performed wholly or partly in the United States or its outlying areas, unless the clause at 52.229-4, Federal, State, and Local Taxes (State and Local Adjustments), is included)

52.232-1 PAYMENTS (APR 1984)

(IAW FAR 32.111(a)(1)) (Applicable to fixed-price supply or services and non-regulated communication services).

52.232-8 DISCOUNTS FOR PROMPT PAYMENT (FEB 2002)

(IAW FAR 32.111(b)(1)) (Applicable to fixed-price supply or fixed-price service)

52.232-11 EXTRAS (APR 1984)

(IAW FAR 32.111(c)(2)) (Applicable to fixed-price supply, fixed-price service, or transportation)

52.232-17 INTEREST (MAY 2014)

(IAW FAR 32.611(a), FAR 32.611(b)) (Applicable when exceeding the simplified acquisition threshold)

52.232-23 ASSIGNMENT OF CLAIMS (MAY 2014)

(IAW FAR 32.806(a)(1)) (Applicable when the micro-purchase threshold is exceeded, unless the contract will prohibit the assignment of claims (see 32.803(b))

52.232-25 PROMPT PAYMENT (JAN 2017)

(IAW FAR 32.908(c))

(a) Invoice payments—

(5) Computing penalty amount. The Government will compute the interest penalty in accordance with the Office of Management and Budget prompt payment regulations at 5 CFR part 1315.

(i) For the sole purpose of computing an interest penalty that might be due the Contractor, Government acceptance is deemed to occur constructively on the 7th day (unless otherwise specified in this contract) after the Contractor delivers the supplies or performs the services in accordance with the terms and conditions of the contract, unless there is a disagreement over quantity, quality, or Contractor compliance with a contract provision. If actual acceptance occurs within the constructive acceptance period, the Government will base the determination of an interest penalty on the actual date of acceptance. The constructive acceptance requirement does not, however, compel Government officials to accept supplies or services, perform contract administration functions, or make payment prior to fulfilling their responsibilities.

(Applicable except when the clause at 52.212-4, Contract Terms and Conditions--Commercial Items is included)

52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER--SYSTEM FOR AWARD

MANAGEMENT (JUL 2013)

(IAW FAR 32.1110(a)(1))

(Applicable for solicitations and contracts that include the provision at 52.204-7 or an agency clause that requires a contractor to be registered in the SAM database and maintain registration until final payment, unless (i) Payment will be made through a third party arrangement; or (ii) An exception listed in 32.1103(a) through (i) applies.)

52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (JUN 2013)

(IAW FAR 32.706-3)

52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS

SUBCONTRACTORS (DEC 2013)

(IAW FAR 32.009-2)

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS

(JUN 2012)

(IAW DFARS 232.7004)

(a) Definitions. As used in this clause—

(1) “Contract financing payment” and “invoice payment” have the meanings given in section 32.001 of the Federal Acquisition Regulation.

(2) “Electronic form” means any automated system that transmits information electronically from the initiating system to all affected systems. Facsimile, e-mail, and scanned documents are not acceptable electronic forms for submission of payment requests. However, scanned documents are acceptable when they are part of a submission of a payment request made using Wide Area WorkFlow (WAWF) or another electronic form authorized by the Contracting Officer.

(3) “Payment request” means any request for contract financing payment or invoice payment submitted by the Contractor under this contract.

(b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests and receiving reports using WAWF, in one of the following electronic formats that WAWF accepts: Electronic…