Changes_to_TO.pdf
PDF 65 KB Posted
- Attached to
- Remanufacture of KC-135 Gearbox Assembly
- Solicitation number
- FA8118-17-R-0006
About this file
Changes to Technical Order
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA811817R0006_revised.pdf | ||
| Updated_SOW_041317.pdf | ||
| FA811817R0006_______0003.pdf | ||
| FA811817R0006_Section_L_&_M.pdf | ||
| FA811817R0006_______0002.pdf | ||
| FA811817R0006_______0001.pdf | ||
| DID_81634C.pdf | ||
| DID_81995.pdf | ||
| Packaging.pdf | ||
| SOW.pdf | ||
| CAV_AF.pdf | ||
| CDRLS.pdf | ||
| 1925665_ATTACH.pdf | ||
| FA811817R0006_RFP.pdf | ||
| SGFP.pdf | ||
| TRNSPDATA_REPORT.pdf |
Show all 16
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Changes to T.O. 16G1-47-3
Page 1-2, under “Inspection” Paragraph 1.4, add new step h:
IUID. Inspect the identification label for the Unique Identification (UID) 2D marking IAW Appendix A.
Page 2-7, Figure 2-1, add new Index 66:
Index p/n CAGE DESCRIPTION UPA 66 200945069-501 98748 UID Label 1
Add New Appendix, Page A-1:
APPENDIX A
UNIQUE IDENTIFICATION (UID) SUPPORTING INFORMATION
A.1 UID SUPPORTING INFORMATION.
- If present, visually inspect UID Nameplate for damage to the 2D symbol, and by using a hand-held electronic reader for readability - Reference T.O. 00-25-260.
- If UID Nameplate is not present or damaged, manufacture new label and install as shown in Table A-1.
- Do not cover any existing markings. Reference T.O. 00-25-260.
- CAGE is that of the activity responsible for guaranteeing uniqueness of the sequencing code.
- For additional information, reference MIL-STD-130 and T.O. 00-25-260.
A.1.1 After attaching UID Nameplate, edge seal and overcoat nameplate with Humiseal 1A20 per MIL-I-46058, type UR, by spraying or by brush to a thickness of 2 – 3 mils in accordance with the manufacturer’s instructions.
Part Number
Noun
UID Label Location:
UID Label Part number
Surface Preparation
Application/ Verification
5-97039-1 5-97039-2
Fillet Flap Drive Double Angle Gearbox Assemblies
Contractor Determined
200945069-501, Dim. “A” = 1.0”, Dim. “B” = 1.0”
REF:
T.O. 00-25-260 Pre-marking Activities
REF:
T.O. 00-25-260
File details come from the government source that posted it. Updated .