PWS-Maint for POU-9 Jun 2010.pdf

PREPARED BY:

76 MXW/OBWK

9 Jun 2010

PERFORMANCE WORK STATEMENT

FOR

NEXIANT POINT-OF-USE CABINETS

MAINTENANCE

TINKER AFB OK 73145

1. DESCRIPTION OF SERVICES.

1.1. Scope. The contractor shall provide all labor, tools, equipment, supplies, personal protective equipment and clothing including reflective clothing, hearing and eye protection including prescription safety glasses, lifting equipment and devices, transportation, and other incidentals necessary to provide annual support and maintenance on government-owned Nexiant Point-of-Use (POU) Cabinets at Tinker AFB OK. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accor-dance with the terms and conditions outlined in the Nexiant Master Support Agreement.

The government-owned Nexiant Point-of-Use (POU) Cabinets are listed in Appendix A-1 thru A-5.

1.2. Scheduled Services.

1.2.1. The contractor shall provide annual support and maintenance to Nexiant Point-of- Use (POU) Cabinets as outlined in the Nexiant Master Support Agreement.

1.3. Malfunction and Notification Process.

1.3.1. Upon discovery of a malfunction on the Nexiant Point-of-Use (POU) Cabinets, the primary Quality Assurance (QAP) or alternate QAP will request maintenance assistance by placing a telephone call or emailing the designated contractor support point of contact.

1.3.1.1. The primary Quality Assurance Personnel (QAP) or alternate QAP will provide a brief description of the malfunction and the name and telephone number of the govern-ment Technical Point of Contact (POC).

1.3.1.2. The contractor shall respond to the primary Quality Assurance Personnel (QAP) or alternate QAP request for assistance after notification of a malfunction by contacting the government Technical POC or if unavailable the primary QAP or alternate QAP via tele-phone communications or email.

1.3.13. The contractor shall provide technical consultation by telephone outlined in the Nexiant Support Agreement.

1.3.1.4. The contractor shall travel to Tinker AFB, OK, arriving no later than twenty-four

(24) clock hours after discontinuance of technical consultation by telephone if equipment is still down as outlined in the Nexiant Master Support Agreement.

1.3.2. Data Access.

1.3.2.1 Contractors delivering or handling official USAF records shall comply with the ap-plicable records management regulations (AFI 33-322, AFMAN 33-363, and AFI 33-364).

Entire Publications, unless determined otherwise by Requirements Personnel and the Contracting Officer.

Jun 1 2010-PWS 3

1.3.2.2. The contractor shall maintain transactional data in the SIMS application for a pe-riod of three (3) years.

1.3.2.3. The contractor shall provide the government access to storage and maintenance data, 3rd party access for restocking and other standard business practices currently avail-able using the standard reporting platform within the SIM application for a period of three

(3) years as listed in the Nexiant Master Support Agreement.

1.4. Parts and Material.

1.4.1. The contractor shall provide parts and material for the Nexiant Point-of-Use (POU) Cabinets as outlined in the Nexiant Master Support Agreement in performance of this

PWS.

1.5. Service Report.

1.5.1. The contractor, upon completion of each maintenance service call, shall provide a service report on a contractor devised form to the primary Quality Assurance Personnel (QAP) or alternate , which shall include the date, location, name of the technician, compa-ny name and description of service provided.

1.6. Increase or decrease in service(s).

1.6.1. The government reserves the right to move, increase or decrease the amount of machines or service based on government need by the CO issued modification to the con-tract.

1.7. Employment

1.7.1. The contractor shall not employ persons on this contract if such employee is identi-fied to the contractor as a potential threat to the health, safety, security, and/or general well being or operational mission of the installation and its population.

1.7.2. Listing of contractor employees.

1.7.2.1. The contractor shall provide to the QAE and the CO, an initial listing of employee names and position titles, prior to contract start date.

1.7.2.2. The contractor shall provide an updated listing of personnel to the QAE and the CO within ten (10) working days when employees affecting the work of this contract change position titles or change employment status.

1.7.3. Employment of government employees.

1.7.3.1. The contractor shall not employ persons on this contract if such employee is iden-tified as a potential threat to the health, safety, security and/or general well being or opera-

Jun 1 2010-PWS 4 tional mission of the installation and its population. The contractor shall not employ any person who is an employee of the United States Government if the employment of that person would create a conflict of interest, nor shall the contractor employ any person who is an employee of the Department of the Air Force, either military or civilian, unless such person seeks and receives approval according to the DoD 5500.7-R Joint Ethics Regula-tions (JER). The contractor shall not employ any person who is an employee of the De-partment of the Air Force if such employment would be contrary to the policies contained in AFI 64-106, Air Force Industrial Labor Relations Activities.

1.7.3.2. The contractor is cautioned that off-duty active military personnel hired under this contract may be subject to permanent change of station, change in duty hours, or deploy-ment. Military Reservists and National Guard members may be subject to recall to active duty. The abrupt absence of these personnel could adversely affect the contractor‟s ability to perform. Their absence at any time shall not constitute an excuse for nonperformance under this contract.

1.7.3.3. The contractor shall be prohibited from employing off-duty QAE who is surveilling any contracts/subcontracts awarded to the contractor.

1.8. Contractor Employees.

1.8.1. All contract employees depending on particular condition, occasion or place, or job assignment shall require professional, suitable attire. All contractor employees shall con-duct themselves in a professional, courteous manner.

1.8.2. The selection, assignment, reassignment, transfer, supervision, management, and control of contractor employees in performance of this Performance Work Statement (PWS) shall be the responsibility and prerogative of the contractor.

1.9. Privately Owned Motor Vehicles.

1.9.1. Contractor personnel shall comply with directives pertaining to operation of private-ly owned vehicles on Tinker AFB per Air Force Instruction (AFI) 31-204, Motor Vehicle Traffic Supervision.

1.10. Name of Person or Alternate(s).

1.10.1. The contractor shall provide the name of the contract manager and any alter-nate(s) who shall act for the contractor when the manager is absent and shall be designat-ed in writing to the CO within two (2) days after contract award, which shall include tele-phone numbers of the contract manager and alternate(s) where these persons may be contacted at any time.

1.10.2. The contract manager or alternate shall have full authority to act for the contractor on all matters relating to operation of this contract at Tinker AFB.

Jun 1 2010-PWS 5

1.10.3. The Contract Manager or alternate shall be available to meet on the installation with government personnel designated by the CO to discuss problem areas.

1.10.4. The contractor shall provide a contract manager who can read, write, speak, and understand English fluently.

1.11. Continuation of Essential Department of Defense (DoD) Contractor Services During Crisis.

1.11.1. The following requirements has been determined not to be essential in accordance and does not require continued support during a crisis as defined in DODI 3020.37, E 2.1.1.

and E 2.1.3.

1.12. Availability of Equipment.

1.12.1. Equipment shall be available for scheduled services Monday through Friday, 7:00 a.m. until 3:00 p.m., excluding Federal Holidays, unless otherwise directed by the CO.

1.13. Acknowledgment of “Housekeeping/FOD/Tool Control Briefing for Contractor Em-ployee(s)”.

1.13.1. The contractor manager shall ensure each employee on the job site is briefed on Housekeeping, FOD and Tool Control prior to starting work in 76 MXW Industrial areas.

1.13.2. Each contractor‟s employee on the job site shall acknowledge receipt of the Housekeeping/Tool Control Briefing for “contractor employees” by reviewing, signing and dating and returning the MXRIWRS Form 032 to the QAE prior to start of work in 76 MXW Industrial areas.

1.14. Foreign Object Damage (FOD) and Dropped Object Prevention (DOP).

1.14.1. Contractor personnel who, in performance of their assigned duties on this contract, work in or travel though areas near operational and production aircraft, engines, munitions, missiles, drones, space systems, support equipment, Aerospace Ground Equipment (AGE), trainers and the contactor personnel operating vehicles and equipment on flight lines, runways, taxiways, parking ramps and in aircraft hangers and maintenance areas are required to receive FOD and DOP training and to comply with AFI 21-101, Air Force Materiel Command (AFCM) Sup1, Chapter 14, Para 14.41 and Tinker AFB Instruction (TAFBI) 21-449 (in its entirety).

1.14.2. The contractor and personnel can request a copy of the FOD Training and Pre-vention DVD at email OC-ALC/FOD/DOP@tinker.af.mil.

1.15. Certificate for Foreign Object Damage (FOD) and Dropped Object Prevention (DOP) Certificate.

mailto:OC-ALC/FOD/DOP@tinker.af.mil

Jun 1 2010-PWS 6

1.15.1. The contractor and personnel shall acknowledge the Foreign Object Damage (FOD) and Dropped Object Prevention (DOP) training by viewing the DVD and providing a contractor devised certificate to the QAE for each employee within ten (10) days of con-tract award.

1.15.1.1. The certificate(s) shall have the title of the training, name of the person who re-ceived the training and the date. The contractor shall also ensure that all new employee(s) view the FOD/DOP Training DVD and provide a contractor devised certificate of training to the QAE prior to starting work in the 76 MXW shops. Annually, the contractor and person-nel shall be required to review the FOD/DOP Training DVD and provide an updated con-tractor devised certificate of training to the QAE.

1.16. Quarterly Operational Security (OPSEC) Brief.

1.16.1. All contractor personnel working on base in the 76 MXW shall be required to read the 76 MXW Quarterly briefing, IAW AFI 31-401 (Information Security), Chapter 8, Para

8.9 - 8.9.5., AFI 31-601 (Industrial Security), Chapter 3, Para 3.2., AFI 10-701 (Operations Security), Chapter 4, Para 4.1.- 4.2. and 76 MXW Operating Instruction (OI) 31-1 (76 MXW Security), Para 4.2. The QAE will ensure that the OPSEC brief is available for review by the contractor.

1.16.1.1. The contractor shall provide a contractor devised report within five (5) days after receipt of the 76 MXW Quarterly OPSEC briefing to the QAE.

1.16.1.2. The report shall include employee names and completion date.

1.17. Common Access (CAC) Card

1.17.1. CAC Card Holders.

1.17.2. Contractor personnel requiring access to Tinker Air Force Base must possess a “Common Access Card” (CAC) or an “Identification Credential” (AFMC Form 387). The CAC can be obtained through the Contractor Verification System (CVS) with the help of the unit Trusted Agent (TA).

1.17.2.1. The CAC card shall be displayed and surrendered in accordance with (IAW) In-stallation Physical Security Program, Tinker Air Force Base Instruction (TAFBI) 31-101 (in its entirety).

1.17.3. All CAC cards shall be returned to PASS and ID, Building 460, upon the comple-tion of the contract.

1.18. National Agency Check (NAC).

Jun 1 2010-PWS 7

1.18.1. The contract manager or alternate shall complete and submit a NAC, AF Form 2583 or civilian Local Files check (LFC) to PASS and Registration (Building 590) for each employee of the contractor requiring access to TAFB Base.

1.18.2. Employee Resignation or Termination.

1.18.2.1. The contractor shall provide the QAE with copies of the turn-in receipt by either US Postal Service or email within ten (10) working days of an employee‟s resignation or termination provide.

1.19. Foreign National(s).

1.19.1. The QAE will contact the Foreign Disclosure Office, OC-ALC/XPO, 405-733- 5029, before a Foreign National will be allowed on base.

1.19.2. The contractor shall notify the QAE before sending a Foreign National representa-tive to perform services.

1.20. Required Initial and Refresher Courses for On-Base Driver‟s Training.

1.20.1. The QAE will schedule the On-Base Driver‟s Training for the contractor.

1.20.1.1. The contractor‟s personnel who drive on the flight line shall complete all FOD awareness/prevention training and testing requirements before driving a vehicle on the flight line per TAFBI 13-202 (entirety).

1.20.2. The contractor and personnel shall submit his/her certificate for the on-base Driv-er‟s Initial and annual Refresher Training course to the QAE.

1.21. Voluntary Protection Plan (VPP).

1.21.1. Tinker AFB is in the process of pursuing VPP recognition or has already been recognized under the Occupational Safety and Health Act (OSHA) Voluntary Protection Plan (VPP). VPP impacts all "applicable contractors" operating on Air Force Installations.

(Applicable contractors are contractors that have completed 1000 hours or more at Tinker AFB within 3 months on the same contract.) It is the contractor's responsibility to ensure its employees and managers have a comprehensive understanding of VPP as well as full compliance with OSHA requirements. Contractor shall follow the safety and health rules of the installation, OSHA and this PWS/SOW. Detailed information on VPP is available on the OSHA website at http://www.osha.gov/dcsp/vpp/index.html.

1.21.1.1. The contractor shall provide their Total Case Incidence Rate (TCIR), their Days Away Restricted and/or Transfer Case Incident rate (DART) rates and their OSHA Form http://www.osha.gov/dcsp/vpp/index.html

Jun 1 2010-PWS 8

300A and annually to the CO and the QAE for consolidation and submission as part of the installation's annual VPP Safety and Health management report. TCIR and DART rates are due by 15th of January each year. However, if the contract expires before January 15th than the contractor shall submit their 300A log, TCIR and DART rates by the end of the contract period of performance.

1.21.1.2. The contractor shall be responsible for compliance with the OSHA (Public law 91-596). The contractor shall submit a Safety and Health Plan (SHP) and corresponding site safety checklist to the CO and the QAE, ten (10) work days after contract award.

1.21.1.3. The contractor's SHP shall include appropriate measures to ensure the contrac-tor investigates, corrects and tracks alleged safety and health violations and uncontrolled hazards in the contractor work areas.

1.21.1.4. The contractor shall comply with the contractor‟s SHP.

1.21.1.5. The contractor shall identify the processes and procedures the contractor shall use to track compliance with the SHP and the process and procedures that shall be used to correct violations.

1.21.1.6. The contractor's SHP shall demonstrate a management commitment to em-ployee SHP and shall identify the application of the safety and health plan to subcontrac-tors. (If applicable)

1.21.1.7. The contractor's SHP shall: identify the roles and responsibilities of the follow-ing individuals; management, supervisors, employees and safety coordinator.

1.21.1.8. The contractor's SHP shall, identify applicable safety rules and regulations, and shall include a worksite hazard analysis to include base-line hazard identification and re-quired control measures.

1.21.1.9. The contractor's SHP shall, include a job site analysis to include hazard of tasks required to control measures, identify employee safety and health training requirements and the documentation process.

1.21.1.10. The contractor's SHP shall include a workplace inspection frequency to include identifying the individual conducting the inspections and shall include employee hazard and mishap reporting procedures.

1.21.1.11. The contractor's SHP shall identify individual(s) responsible for corrective ha-zards, and shall identify first aid and injury procedures, procedures for accident investiga-tion and reporting, identify emergency response procedures and identify the process for tracking controlled hazards in contractor work areas.

Jun 1 2010-PWS 9

1.21.1.12. The primary contractor shall be responsible for establishing these require-ments for all subcontractors who qualify as applicable contractor meaning they are working on Tinker AFB for a minimum of one thousand hours in three months under the same con-tract.

1.22. Emergency Procedures.

1.22.1. Contractor employees shall follow the direction of Government employees in re-gards to emergency evacuation procedures, i.e. fire, tornado, active shooter and bomb threats. It is the contractors‟ responsibility to account for their employees following an emergency evacuation. Contractor personnel shall participate with government personnel in all fire and tornado drills and at no additional cost to the government.

1.23. Environmental Protection and Safety.

1.23.1. The contractor shall be knowledgeable of and comply with all applicable federal, state and local laws, regulations and requirements regarding environmental protection and occupational safety and health.

1.23.1.2. The contractor shall comply with any laws or regulation changes during the term of this contract.

1.23.1.3. The contractor shall follow manufacturer‟s guidelines and professional recom-mendations for contractor of humidity, temperature, cleanliness and material handing (in-cluding hazardous materials).

1.24. Safety.

1.24.1. The contractor shall also comply with all safety practices posted in the assigned work area and the attached Appendix C, provided by the Safety Office.

1.25. Housekeeping.

1.25.1. The contractor shall keep the work areas clean and neat in accordance with In-dustry Standards, Occupational, Safety and Health Administration (OSHA), fire and safety standards and this Performance Work Statement (PWS).

1.26. Tool Control.

1.26.1. The contractor and personnel, while performing contract services in or around Maintenance Production Shops, shall comply with Chapter 10 of AFI 21-101, AFMC Sup 1, 21-101, Chapter 10 (all paragraphs).

1.26.1.1. The contractor or contractor‟s personnel shall inventory the container or bag of tools at the beginning and at the end of each work day.

Jun 1 2010-PWS 10

1.26.1.2. The contractor‟s personnel shall immediately notify the QAE of any tools that are missing in the work area, container or bag of tools.

1.26.1.3. The QAE will report to the appropriate government personnel any missing con-tractor tool(s) not located within one hour after notification of lost or missing tools.

1.27. Forms and Publications, Technical Orders (TO), AFI and Air Force Material Com-mand Instruction (AFMCI).

1.27.1. The contractor shall obtain the forms and publications expressly required to per-form the work in this contract via the internet at www.e-publishing.af.mil.

1.27.1.1. In the event that a form or publication is not available on-line, the QAE will pro-vide the form, instruction, publication to the contractor upon written request (e-mail is ac-ceptable) by the contractor. In event that laws, regulations, TOs, AFI, Air Force Material Command Instructions (AFMCI‟s) change during the term of this contract, the contractor is required to comply as such changes come into effect. Contractors delivering or handling office USAF records shall comply with the applicable records management regulation AFI 33-322, AFMAN 37-123 and AFI 37-138 (in their entirety).

1.28. Contractor Phase In.

1.28.1. To ensure a smooth changeover from a current contract to a new contractor, a thirty (30) calendar day Phase In is required.

1.28.2. The current contractor shall be cooperative to ensure a smooth changeover is ac-complished during the phase-in and phase-out periods.

1.29. Phase-in Requirements.

1.29.1. During the thirty (30) calendar day phase-in period, the new contractor shall hire a workforce to assure satisfactory performance beginning on the contract start date.

1.29.1.1. The contractor, after coordinating with the QAE, shall allow the successor to conduct on-site interviews with employees.

1.29.1.2. The contractor shall obtain security clearance(s) for the Common Access Card

(s) (CAC).

1.29.2. The contractor shall ensure that all training requirements for the newly hired em-ployee(s) are completed before contract start date.

1.30. Contractor Phase-out Requirements.

1.30.1. During the phase-out period, the incumbent contractor shall be fully responsible for all work performed under this Performance Work Statement (PWS).

http://www.e-publishing/

Jun 1 2010-PWS 11

1.30.2. The incumbent contractor shall cooperate fully to permit an orderly changeover of workload.

1.30.3. The incumbent contractor shall allow the new contractor and government per-sonnel access on a non-interference basis, to observe the day-to-day operations and to become familiar with the work requirements and procedures.

1.31. Contractor Compliance.

1.31.1. The contractor shall comply with all applicable directives cited in this PWS.

1.31.1.1. The contractor, in the event the laws, regulations, Technical Orders (TO), AFI, Air Force Material Command Instructions change during the term of this contract, shall comply as such changes come into effect at no additional cost to the government.

1.32. Affirmative Procurement

1.32.1. Affirmative Procurement has been determined not to be applicable to this Perfor-mance Work Statement (PWS).

1.33. Government Acceptance.

1.33.1. Designated QAE will accomplish inspection and acceptance of services per-formed based on requirements of the Performance Work Statement (PWS), the contract and the „Inspection of Services Clause‟.

2. SERVICE SUMMARY.

SS NO PERFORMANCE PWS PERFORMANCE

OBJECTIVE PARAGRAPH THRESHOLD

SS 1 The contractor shall provide annual support and maintenance to Nexiant Point-of-Use (POU) Cabinets as out-lined in the Nexiant Master Support Agreement.

1.2.1. 100% Compliance

SS 2 The contractor shall respond to the primary Quality Assurance Personnel (QAP) or alternate QAP request for assistance after notification of a mal-function by contacting the government Technical POC or if unavailable the primary QAP or alternate QAP via tel-ephone communications or email.

1.3.1.2. 100% Compliance

SS 3 The contractor shall provide technical consultation by telephone outlined in the Nexiant Support Agreement.

1.3.1.3. 100% Compliance

SS 4 The contractor shall travel to Tinker

AFB, OK, arriving no later than twenty-four (24) clock hours after disconti-nuance of technical consultation by telephone if equipment is still down as outlined in the Nexiant Master Support Agreement.

1.3.1.4. 100% Compliance

SS 5 The contractor shall provide parts and material for the Nexiant Point-of-Use (POU) Cabinets as outlined in the Nex-iant Master Support Agreement in per-formance of this PWS.

1.4.1. 100% Compliance

SS 6 The contractor, upon completion of each maintenance service call, shall provide a service report on a contractor devised form to the primary Quality Assurance Personnel (QAP) or alternate , which shall include the date, location, name of the technician, company name and de-scription of service provided.

1.5.1. 100% Compliance

SS 7 The contractor shall provide to the QAE and the CO, an initial listing of employee names and position titles, prior to con-tract start date.

1.7.2.1. 100% Compliance

SS 8 The contractor shall provide an updated listing of personnel to the QAE and the CO within ten (10) working days when employees affecting the work of this contract change position titles or change employment status.

1.7.2.2. 100% Compliance

SS 9 The contractor shall provide the name of the contract manager and any alter-nate(s) who shall act for the contractor when the manager is absent and shall be designated in writing to the CO within two (2) days after contract award, which shall include telephone numbers of the contract manager and alternate(s) where these persons may be contacted at any time.

1.10.1. 100% Compliance

SS 10 The Contract Manager or alternate shall be available to meet on the installation with government personnel designated by the CO to discuss problem areas.

1.10.3. 100% Compliance

SS 11 1.13.2. Each contractor‟s employee on the job site shall acknowledge receipt of the Housekeeping/Tool Control Briefing for “contractor employees” by reviewing, signing and dating and returning the MXRIWRS Form 032 to the QAE prior to start of work in 76 MXW Industrial areas.

1.13.2. 100% Compliance

SS 12 The contractor and personnel shall ac-knowledge the Foreign Object Damage (FOD) and Dropped Object Prevention (DOP) training by viewing the DVD and providing a contractor devised certificate to the QAE for each employee within ten

(10) days of contract award.

1.15.1. 100% Compliance

SS 13 The contractor shall provide a contractor devised report within five (5) days after receipt of the 76 MXW Quarterly OPSEC briefing to the QAE.

1.16.1.1. 100% Compliance

SS 14 The contractor and personnel shall submit his/her certificate for the on-base Driver‟s Initial and annual Refresher Training course to the QAE.

1.20.2. 100% Compliance

SS 15 The contractor shall be responsible for compliance with the OSHA (Public law 91-596). The contractor shall submit a Safety and Health Plan (SHP) and cor-responding site safety checklist to the CO and the QAE, ten (10) work days after contract award.

1.21.1.2. 100% Compliance

3. GOVERNMENT-FURNISHED PROPERTY AND SERVICES.

3.1. Government Furnished Property (GFP)

3.1.1. Government Furnished Property (GFP) is not applicable to this contract in accor-dance with FAR Parts 45 and 52.245 plus supplements.

3.2. Reserved.

3.3. Government Furnished Services.

3.3.1. Government Furnished Services are applicable during the performance of this con-tract.

3.3.1. Security Forces.

Jun 1 2010-PWS 15

3.3.1.1. The government will provide general on base security forces service. The Securi-ty Forces‟ telephone number is 911 for emergencies, 734-2000 for crime in progress and 734-3737 for non-emergency calls.

3.3.2. Fire and Emergency Services.

3.3.2.1. The government will provide general on-base fire protection services. The con-tractor shall comply with fire prevention rules and regulations enforced by the Tinker AFB Fire Prevention Branch. Call 911 for emergencies. For routine fire prevention matters call 734-3981. For routine calls to dispatch, call 734-7964.

3.3.3. Emergency Medical Service.

3.3.3.1. The government will provide 24 hour on-base state certified paramedic level emergency response and patient transport services for contractor personnel who are in-jured or become seriously ill while on Tinker AFB, OK. The telephone number is 911 for emergencies.

Note: Calling 911 from a cell phone will be received by off base emergency 911 systems, causing a delay in response time by emergency personnel. When possible use a base telephone to receive on base help.

3.3.4. Utilities.

3.3.4.1. The government will furnish utility services. These utilities include natural gas, electricity, water and sewer for the sole purpose of accomplishing this contract. If the con-tractor requires additional utility services, it shall be the contractor‟s responsibility to pro-vide. Contractor shall use due care and diligence in efforts to conserve utilities to reduce utility costs.

3.3.5. Refuse collection.

3.3.5.1. The government will provide refuse collection services limited to the extent pro-vided in the Base Refuse Collection Contract for government provided facilities. The gov-ernment will only allow non-hazardous refuse to be emptied into the nearest authorized refuse dumpster for trash collection. Do not use the government dumpsters for collection of construction debris.

3.4. Workspace.

3.4.1. The government will provide adequate workspace around the equipment area.

3.5. Driver‟s Training for Contractor Ramp Access (if required)

Jun 1 2010-PWS 16

3.5.1. The government will provide the initial and refresher courses for the On-Base driv-er‟s training for contractor ramp access.

3.6. Customer Data

3.6.1. The government shall retain ownership of any data, information or material that is created in connection with government use of the SIM Service (“Customer Data”)