Attach 1 - Statement of Objective (SOO) for Mirion Lynx II_Redacted.pdf

Attachment 1:

Statement of Objective (SOO)/Technical Requirements

Package (TRP)

USAF CIL LYNX‐II Digital Signal Analyzer

7 May 2024

1. SOO for Equipment USAF CIL LYNX-II Digital Signal Analyzer

2. Purpose The purpose of this effort is to procure digital signal analyzers to be integrated with the USAF Radiochemistry Laboratory's (CIL) complete count room radiation detection/measurement. These Lynx-II digital signal analyzers will allow CIL to maintain its detector capability and mission readiness.

3. Scope USAF CIL requires three Lynx-II digital signal analyzers to maintain its detector capability.

4. Background The Lynx-II digital signal analyzer incorporates front-end signal conditioning, a fast digitizing analog-to-digital converter (ADC), programmable digital filters, digital oscilloscope, automatic pole/zero US Patent #7725281 and baseline restorer, digital fast discriminator, two groups of 32k channel spectral memory, digital stabilizer and a triple-range HVPS. It serves as an integrated signal analyzer to process detector signal inputs and produce spectra for further analysis. A digital signal analyzer is a required piece of equipment for all gamma detectors.

5. Period of Performance Commercial off the shelf equipment. No performance necessary other than preparation and shipment of equipment.

6. Operating Constraints

6.1 No wireless communication capabilities

- Due to the restrictions of wireless communications within the laboratory, the acquired device cannot have a wifi/Bluetooth/etc. signal.

6.2 No internet connectivity requirements

- The device must be stand-alone and not require internet connection.

System Requirements

ALL equipment must be compatible with the current measurement system which is controlled by Mirion hardware and software. Similar equipment produced by companies other than Mirion will not work with ANY equipment we currently have and cannot be used as an alternative.

Warranty and Support characteristics

Hardware shall be accompanied by documentation with specific manufacturing attributes and all specifications sheet illustrating compliance with detection characteristic described in the technical requirements.

Shall provide a vendor warranty of no less than one year and/or support covering all components.

7. Technical Contractual Requirements

7.1 Technical Refresh

In order to ensure new design enhancements and technological updates or advances, the contractor shall offer, under this contract, hardware and software components available to the contractor's commercial customers. Furthermore, the contractor shall make available any commercially available updates to the hardware and software provided under this contract. If such updates are available to other customers without charge, then they shall also be made available to the Government without additional charge. The contractor will ship these updates to existing customers who have acquired the hardware/software being updated under this DO. Vendor commercial product offerings shall include “state of the art” technology, i.e., the most current proven level of development available in each product category.

7.2 Trade Agreement Act (TAA)

All proposed products must be compliant with the Trade Agreements Act of 1979 (TAA) and related clauses in Section I of this contract. In accordance with DFARS 252.225- 7021, the Trade Agreements Certificate at DFARS 252.225-7020 shall be provided for each end item defined and specified in a solicitation that exceeds the TAA threshold subject to the waivers and exceptions provided in FAR 25.4, and DFARS 225.4 offered in response to any RFQ issued under this contract. Please note that Federal Acquisition Regulation (FAR) paragraph 25.103(e) includes an exemption from the Buy American Act (BAA) for acquisition of information technology that is commercial items.

7.3 Authorized Resellers

The contractor may be an authorized reseller of new and refurbished/remanufactured equipment for OEMs proposed under this contract. The contractor may also procure directly from the OEM or utilize other legitimate distribution channels to provide the required products in accordance with the OEM’s policies on reselling. Any contractor’s channel relationships with their OEM partners (gold, silver, etc.) will be represented in the best pricing offered. If the contractor is not an OEM reseller, the contractor shall clearly identify this on the submitted proposal and list the OEM resell partner’s registered relationship with the OEM. DOs may restrict the use of authorized resellers, specific OEMs, or identify required OEMs. The contractor shall ensure all products are genuine and eligible for any OEM warranties, maintenance agreements and licensing as offered. Genuine products are those products the OEM, by their policy, considers not “secondary”, destroyed, stolen or scrapped.

7.4 Remanufactured/Refurbished Products

Remanufactured/Refurbished products shall not be accepted.

7.5 Items on Backorder

In their response to a Request for Quote (RFQ), the contractor shall provide notification, if applicable, that a particular item is on backorder, the expected lead-time to fulfill the order, etc.

It shall be implicit that a response to an RFQ with no items identified on backorder is a declaration that the items are available at the time of quote submission.

7.6 Warranty

The contractor shall provide any OEM pass through warranty and standard commercial warranties applicable to the products being purchased at no cost. This shall apply to new, refurbished and remanufactured equipment.

7.7 Hardware and Associated Software and Peripherals

All hardware delivered under this contract shall include associated software, documentation and associated peripherals required for operations (such as controllers, connectors, cables, drivers, adapters, etc.) as provided by the OEM. This is true only if the applicable OEM provides such items with the product itself.

7.8 Software

For all software that is outside of hardware and purchased independently, the contractor shall provide the software license registered to the customer’s organization.

7.9 Customer Support

The prime contractor shall provide 24x7 live telephone support during the warranty period to assist in isolating, identifying, and repairing software and hardware failures, or to act as liaison with the manufacturer in the event that the customer requires assistance in contacting or dealing with the manufacturer.

7.10 Product Maintenance

The contractor shall provide associated maintenance and upgrades to include spares/parts and emergency support worldwide, during the warranty period.

8. Delivery Requirements

8.1 Timeframes

The contractor shall adhere to the following Product Delivery Capability requirements when providing products under this contract. The contractor shall deliver the quantities of NetCentric products to meet ordinary as well as fluctuating (war-time, Terrorist Tempo, Ops Tempo) government requirements in accordance with prescribed delivery schedules stipulated in individual contracts. Delivery of products will be to CONUS, OCONUS, and remote locations as identified below. For AOR’s and/or remote sites that do not permit commercial deliveries, the vendor’s delivery capabilities must be in accordance with AFI 24- 203, Preparation and Movement of Air Force Cargo, 13 April 2007. Additional delivery terms or schedules, such as ship-in-place, expedited shipping or shipping to APO/FPO addresses, shall be negotiated between the Contractor and the Ordering Contracting Officer (OCO).

Definitions: CONUS: The 48 contiguous states, Alaska, Hawaii, and the District of Columbia.

OCONUS: Germany, Italy, Japan, Korea, Belgium, Turkey, Puerto Rico, United Kingdom, and the Netherlands. Remote OCONUS: those locations that are not listed under CONUS or Named OCONUS.