RFI Responses Muns CTK FA667524Q0007.pdf

REQUEST FOR INFORMATION / CLARIFICATION FORM

SOLICITATION

NO:FA667524Q0007

RFI RESPONSE NO: 001 DATE (20240429)

SUBJECT: Muns CTK DRAWING REFERENCE/ DETAIL:

REQUEST:

1. For line item 3, the Laser etching. Are you able to provide what is going to be etched onto the tools?

2. For lines 4-33 & 63-65, are you able to provide any more information/description? Some of the part numbers to not provide enough information to provide an accurate response.

3. Is foam cutting part of this requirement?

RESPONSES:

1. The laser etching for each tool will be “S4MC00004”.

2. For all customer provided tools (lines 4-33 & 63-65), the requirement has recently changed to only six tools as outlined below (3x Spanner Wrench, 1x Fuze Ring Spanner/Fuze Seal Wrench, 2x JDAM strake tool). The images and specifications for these tools are attached as well for further clarification.

Line # Engineering Drawing

14 X9018561C - SPANNER WRENCH*

15 X9018561C - SPANNER WRENCH*

16 X9018561C - SPANNER WRENCH*

17 9532906 FMU-152 FUZE RING SPANNER

18 X200025560 JDAM STRAKE ALIGNMENT TOOL

19 X200025560 JDAM STRAKE ALIGNMENT TOOL

3. All drawers of the CTK will need foam cut to the exact size of all tools required to be included.

301 CONF/PK

DATE (YYYYMMDD)

20240429

TYPE OR PRINT NAME AND TITLE

EMILY R. CROTTA

CONTRACT SPECIALIST

SIGNATURE:

X9018561-10_C.dft

AIR FORCE RELEASE D

ENGINEERING DRAWING LAYOUT D

USED ONNEXT ASSEMBLY

FEB 74

FORMAF

CODE IDENT NO.

CURRENT

DRAWING NO.AIR FORCE CODE IDENT NO.AIR FORCE AUTHENTICATION

ENG

CHK

DR

.XXX±

.XX±

DECIMALS ANGLESFRACTIONS

DIMENSIONS ARE IN INCHES-TOLERANCES ON:

THIRD ANGLE PROJECTION

TITLE

SIZE

SCALE: SHEET

PARTS LIST

APPLICATION

U.S. AIR FORCE

28 7 6 5 4 3 1

A

B

C

D

A

B

C

D

18894

- EGLIN A.F.B. FL

GENERATED USING SOLID EDGE FILENAME:

REV

UNLESS OTHERWISE SPECIFIED

QUANITY REQUIRED PER DASH NO.

SIGNATURES ARE ON FILE ON

AF FORM 2602 IN MMHE, EGLIN AFB

APPV

WRENCH

SPANNER, COMBINATION

X9018561 C 1/1

X9

C

FINAL FINAL

.5°.010 .03

CAD MAINTAINED. CHANGES SHALL ONLY BE

INCORPORATED AT THE DIRECTION OF THE DESIGN

ACTIVITY USING A COMPATIBLE CAD SYSTEM.

DISTRIBUTION STATEMENT C DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS. REASON: ADMINISTRATIVE OR OPERATIONAL USE. DATE: 15 SEPTEMBER 1988. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO MMHE FOCAL POINT, EGLIN AFB, FL 32542-5000.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC. 2751, ET SEQ.). VIOLATIONS OF THESE EXPORT CONTROL LAWS ARE SUBJECT

TO SEVERE CRIMINAL PENALTIES.

DESTRUCTION NOTICE - FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

NOTES:

1. INTERPRET DRAWING IAW ASME Y14.100 AND ASME Y14.5M-1994.

2. REMOVE ALL BURRS AND SHARP EDGES .06 MAX.

3. DELETED.

4. DELETED.

5. DELETED.

6. WORKMANSHIP:

ALL PARTS SHALL BE IN THE CONDITION SPECIFIED BY THE DRAWINGS AND SHALL

BE FREE FROM DEFECTS SUCH AS, BUT NOT LIMITED TO, BLEMISHES, BURRS,

CAVITIES, PITS, VOIDS, CORROSION, CRACKS, DENTS, DISTORTION, WARPAGE,

GOUGES, SCORES, NICKS, INCLUSIONS, LAPS, POROSITY, SLIVERS, AND OTHER

FOREIGN MATTER. EXCEPT AS PROVIDED ON THE DRAWING, CLEANING SHALL BE

THOROUGH TO REMOVE ALL DIRT, CHIPS, GREASE, OIL, FLUX, CHEMICAL DEPOSITS,

RESIDUES, AND OTHER FOREIGN MATTER. THE CLEANING METHOD AND AGENTS

USED SHALL NOT BE INJURIOUS TO ANY PART OR TO THE ENVIRONMENT, NOR

SHALL ANY PART BE CONTAMINATED BY THE CLEANING AGENT.

7. DELETED.

8. DELETED.

9. PERMANENTLY MARK “18894-X9018561-(AND APPROPRIATE DASH NO.) IN

APPROXIMATE AREA SHOWN IN .25 HIGH CHARACTERS IAW MIL-STD-130.

2 2X

2X3

A/R A/R LOCKING COMPOUND MIL-S-22473 GRADE C 1D3 4

2 2 PIN, .001 OVERSIZE OKVE6 98385A207 .187 DIA X .625 LG, ALLOY STL 1C2 3

2 2 PIN, .001 OVERSIZE OKVE6 98385A238 .25 DIA X .625 LG. ALLOY STL 1D3 2

1 1 SPANNER WRENCH BODY -01/-03 .25 THK 4130 STL PLATE IAW QQ-S-626 1D3 1

-30 -10 NOMENCLATURE CAGE IDENTIFYING NO. MATERIAL/SPECIFICATION ZN FN

.332X .382X

10.00 (-10 ASSY)

16.00 (-30 ASSY)

5.50 4.00

.62

-10 ASSEMBLY SHOWN

-30 ASSEMBLY AS SHOWN

SEE SHEET 3

2 B

3 B

ALL SHEETS ARE

SAME REVISION

M LAPEE 19920320

-01 INTO -10 ASSEMBLY

-03 INTO -30 ASSEMBLY

B. MILLER 19920323

F ZABOROWSKI 19920323

B

REDRAWN WITH CHANGE. DELETED NOTES 3, 4, 5,

7, 8. ADDED NOTE 9. IN THE PARTS LIST FIND NO 2

WAS SCREW, CAP MADE FROM NAS 1352-6-20;

FIND 3 WAS SCREW, CAP MADE FROM NAS1352-

4H16;FIND NO 4 WAS SEALING COMPOUND, MIL-S-

22473 GRADE H.

20070509 EJZ

C THE IDENTIFYING NUMBER FOR FN 2 WAS

9838A238 NPW 20120419 20120419 BTC

Lines 14-16, Spanner Wrench

1298789562C Highlight

D

ENGINEERING DRAWING LAYOUT D1655

FEB 74

FORMAF

DRAWING NO.AIR FORCE CODE IDENT NO.SIZE

SCALE SHEET

28 7 6 5 4 3 1

A

B

C

D

A

B

C

D

18894

GENERATED USING SOLID EDGE FILENAME:

REV

CAD MAINTAINED. CHANGES SHALL ONLY BE

INCORPORATED AT THE DIRECTION OF THE DESIGN

ACTIVITY USING A COMPATIBLE CAD SYSTEM.

DISTRIBUTION STATEMENT C DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS. REASON: ADMINISTRATIVE OR OPERATIONAL USE. DATE: 15 SEPTEMBER 1988. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO MMHE FOCAL POINT, EGLIN AFB, FL 32542-5000.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC. 2751, ET SEQ.). VIOLATIONS OF THESE EXPORT CONTROL LAWS ARE SUBJECT

TO SEVERE CRIMINAL PENALTIES.

DESTRUCTION NOTICE - FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

2.252X

4.47 3.222X

6.692X 7.062X

8.292X 9.16

9.622X 10.002X

.84 1.375

.75 .50

.719

2.562

1.719

2.75

3.78 4.12

4.66 5.50

3.812

2.0622.750

2.00 3.28

3.50 4.00

3.000

.25 (STK)

2X O.1876-.1882

14X R.19 OPTIONAL 45v X .192X O .2505-.2497

2.00

3.50

-01 WRENCH BODY

3.002X

4X R.25

D

X9018561 1/1

X9

RR2X R.25

5.50

7.88

REVISIONS

LTR DESCRIPTION DATE APPROVED

B SEE SHEET 1 NPW 20070430 20070509 EJZ

C SEE SHEET 1 NPW 20120419 20120419 BTCLines 14-16, Spanner Wrench

D

ENGINEERING DRAWING LAYOUT D1655

FEB 74

FORMAF

DRAWING NO.AIR FORCE CODE IDENT NO.SIZE

SCALE SHEET

28 7 6 5 4 3 1

A

B

C

D

A

B

C

D

18894

GENERATED USING SOLID EDGE FILENAME:

REV

CAD MAINTAINED. CHANGES SHALL ONLY BE

INCORPORATED AT THE DIRECTION OF THE DESIGN

ACTIVITY USING A COMPATIBLE CAD SYSTEM.

DISTRIBUTION STATEMENT C DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS. REASON: ADMINISTRATIVE OR OPERATIONAL USE. DATE: 15 SEPTEMBER 1988. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO MMHE FOCAL POINT, EGLIN AFB, FL 32542-5000.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC. 2751, ET SEQ.). VIOLATIONS OF THESE EXPORT CONTROL LAWS ARE SUBJECT

TO SEVERE CRIMINAL PENALTIES.

DESTRUCTION NOTICE - FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

.25 (STK)

.50 .719

2.00 3.28

3.50

4.00

3.000 2.562

.75

.84 1.375

1.719

2.75 2.00

3.503.78 4.12

4.66

5.50

2.252X 3.0002X

4.47

15.6252X 16.002X

.38

2.75

3.8122.06

3.222X

14.292X 15.16

R .1914X OPTIONAL 45v X .19

R .254X

R .252X R R

2X O .2505-.2497

2X O.1876-.1882

X9018561 1/1

X9

6.692X 13.072X

5.50

13.88

-03 WRENCH BODY1

D

REVISIONS

LTR DESCRIPTION DATE APPROVED

B SEE SHEET 1 NPW 20070430 20070509 EJZ

C SEE SHEET 1 NPW 20120419 20120419 BTCLines 14-16, Spanner Wrench

Line 17, Wrench, Fuze Seal GBU

Line 17, Wrench, Fuze Seal GBU

X200025560-10_A.dft

AIR FORCE RELEASE D

ENGINEERING DRAWING LAYOUT D

USED ONNEXT ASSEMBLY

FEB 74

FORMAF

CODE IDENT NO.

CURRENT

DRAWING NO.AIR FORCE CODE IDENT NO.AIR FORCE AUTHENTICATION

ENG

CHK

DR

.XXX±

.XX±

DECIMALS ANGLESFRACTIONS

DIMENSIONS ARE IN INCHES-TOLERANCES ON:

THIRD ANGLE PROJECTION

TITLE

SIZE

SCALE: SHEET

PARTS LIST

APPLICATION

U.S. AIR FORCE

28 7 6 5 4 3 1

A

B

C

D

A

B

C

D

18894

- EGLIN A.F.B. FL

CONTRACT NUMBER:

FA9200-07-C-0006

GENERATED USING SOLID EDGE FILENAME:

REV

UNLESS OTHERWISE SPECIFIED

QUANITY REQUIRED PER DASH NO.

SIGNATURES ARE ON FILE ON

AF FORM 2602 IN MMHE, EGLIN AFB

APPV

JDAM STRAKE ALIGNMENT KIT

X200025560 A 1 / 2

M. LAPEE 20011221

X2

A

FINAL FINAL

.5°.010 .03

CAD MAINTAINED. CHANGES SHALL ONLY BE

INCORPORATED AT THE DIRECTION OF THE DESIGN

ACTIVITY USING A COMPATIBLE CAD SYSTEM.

REVISIONS

LTR DESCRIPTION DATE APPROVED

A REDRAWN WITH CHANGE. WAS (1 EA) FIND 1 AND 2.

ML 20081117

20081218 EJZ

DISTRIBUTION STATEMENT C DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS. REASON: ADMINISTRATIVE OR OPERATIONAL USE. DATE: 15 SEPTEMBER 1988. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO MMHE FOCAL POINT, EGLIN AFB, FL 32542-5000.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC. 2751, ET SEQ.). VIOLATIONS OF THESE EXPORT CONTROL LAWS ARE SUBJECT

TO SEVERE CRIMINAL PENALTIES.

DESTRUCTION NOTICE - FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

NOTES:

1. INTERPRET DRAWING IAW ASME Y14.100 AND ASME Y14.5M-1994.

M. PRESTARRI 20020122

E. ZAMORSKI 20020122

M. PRESTARRI 20020122

2 COLLAR, ALIGNMENT 200025025-01 2

2 BAR, ALIGNMENT 200025026-01 1

-10 NOMENCLATURE CAGE IDENTIFYING NO. MATERIAL/SPECIFICATION ZN FN

BOMB LUG (REFERENCE)

BOMB LUG (REFERENCE)

Lines 18-19, JDAM Strake Alignment Tool

OF 1

AIR FORCE RELEASE D

ENGINEERING DRAWING LAYOUT D

USED ONNEXT ASSEMBLY

FEB 74

FORMAF

CODE IDENT NO.

CURRENT

DRAWING NO.AIR FORCE CODE IDENT NO.AIR FORCE AUTHENTICATION

ENG

CHK

DR

.XXX±

.XX±

DECIMALS ANGLESFRACTIONS

DIMENSIONS ARE IN INCHES-TOLERANCES ON:

THIRD ANGLE PROJECTION

TITLE

SIZE

SCALE: SHEET

PARTS LIST

APPLICATION

U.S. AIR FORCE

28 7 6 5 4 3 1

A

B

C

D

A

B

C

D

18894

- EGLIN A.F.B. FL

CONTRACT NUMBER:

FO8626-96-D-0003

GENERATED USING SOLID EDGE FILENAME:

REV

UNLESS OTHERWISE SPECIFIED

QUANITY REQUIRED PER DASH NO.

SIGNATURES ARE ON FILE ON

AF FORM 2602 IN AAC/YBCM, EGLIN AFB

APPV

X200025026-01_A.dft

BAR, ALIGNMENT,

JDAM STRAKE-LUG

X200025026 A 1/1

C. FALLIN 2000/06/07

X2

A

200025560 2000255660

.5°.010 .03

CAD MAINTAINED. CHANGES SHALL ONLY BE

INCORPORATED AT THE DIRECTION OF THE DESIGN

ACTIVITY USING A COMPATIBLE CAD SYSTEM.

MWL 2000/06/27

E. ZAMORSKI 2002/01/22

M. PRESTARRI 2002/01/22

DISTRIBUTION STATEMENT C DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS. REASON: ADMINISTRATIVE OR OPERATIONAL USE. DATE: 15 SEPTEMBER 1988. OTHER REQUESTS

FOR THIS DOCUMENT SHALL BE REFERRED TO AAC/WMOM, EGLIN AFB, FL 32542-5000.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC. 2751, ET SEQ.). VIOLATIONS OF THESE EXPORT CONTROL LAWS ARE SUBJECT

TO SEVERE CRIMINAL PENALTIES.

DESTRUCTION NOTICE - FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

NOTES:

1. INTERPRET DRAWING IAW MIL-STD-100 AND ASME Y14.5M-1994.

2. REMOVE ALL BURRS AND SHARP EDGES .06 MAX.

3. MATERIAL: .375 X .750 BAR, 304 STAINLESS STEEL, ASTM A276, QQ-S-763.

4. IMPRESSION STAMP “18894-X200025026-01”, IN APPROXIMATE AREA SHOWN, IN .250 HIGH

GOTHIC CHARACTERS, IAW MIL-STD-130.

5. WORKMANSHIP:

ALL PARTS SHALL BE IN THE CONDITION SPECIFIED BY THE DRAWINGS AND SHALL BE FREE

FROM DEFECTS SUCH AS, BUT NOT LIMITED TO, BLEMISHES, BURRS, CAVITIES, PITS, VOIDS, CORROSION, CRACKS, DENTS, DISTORTION, WARPAGE, GOUGES, SCORES, NICKS, INCLUSIONS, LAPS, POROSITY, SLIVERS, AND OTHER FOREIGN MATTER. EXCEPT AS PROVIDED ON THE

DRAWING, CLEANING SHALL BE THOROUGH TO REMOVE ALL DIRT, CHIPS, GREASE, OIL, FLUX, CHEMICAL DEPOSITS, RESIDUES, AND OTHER FOREIGN MATTER. THE CLEANING METHOD

AND AGENTS USED SHALL NOT BE INJURIOUS TO ANY PART OR TO THE ENVIRONMENT, NOR

SHALL ANY PART BE CONTAMINATED BY THE CLEANING AGENT.

12.00

.750 (STK)

.375 (STK)

O .25

2X R

REVISIONS

LTR DESCRIPTION DATE APPROVED

A NEXT ASSY/USED ON WAS FINAL. ML 20020122 20020122 E.J.Z.

REDRAWN WITHOUT CHANGE. FILENAME WAS

200025026-01_A.PRT ZF 20050103

1/6/2005 M. LAPEE

Lines 18-19, JDAM Strake Alignment Tool

OF 1

AIR FORCE RELEASE D

ENGINEERING DRAWING LAYOUT D

USED ONNEXT ASSEMBLY

FEB 74

FORMAF

CODE IDENT NO.

CURRENT

DRAWING NO.AIR FORCE CODE IDENT NO.AIR FORCE AUTHENTICATION

ENG

CHK

DR

.XXX±

.XX±

DECIMALS ANGLESFRACTIONS

DIMENSIONS ARE IN INCHES-TOLERANCES ON:

THIRD ANGLE PROJECTION

TITLE

SIZE

SCALE: SHEET

PARTS LIST

APPLICATION

U.S. AIR FORCE

28 7 6 5 4 3 1

A

B

C

D

A

B

C

D

18894

- EGLIN A.F.B. FL

CONTRACT NUMBER:

FO8626-96-D-0003

GENERATED USING SOLID EDGE FILENAME:

REV

UNLESS OTHERWISE SPECIFIED

QUANITY REQUIRED PER DASH NO.

SIGNATURES ARE ON FILE ON

AF FORM 2602 IN AAC/YBCM, EGLIN AFB

APPV

X200025025-01_A.dft

COLLAR, ALIGNMENT,

JDAM STRAKE-LUG

X200025025 A 2/1

C. FALLIN 2000/06/07

X2

A

200025560 2000255660

.5°.010 .03

CAD MAINTAINED. CHANGES SHALL ONLY BE

INCORPORATED AT THE DIRECTION OF THE DESIGN

ACTIVITY USING A COMPATIBLE CAD SYSTEM.

MWL 2000/06/27

E. ZAMORSKI 2002/01/22

M. PRESTARRI 2002/01/22

DISTRIBUTION STATEMENT C DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS. REASON: ADMINISTRATIVE OR OPERATIONAL USE. DATE: 15 SEPTEMBER 1988. OTHER REQUESTS

FOR THIS DOCUMENT SHALL BE REFERRED TO AAC/WMOM, EGLIN AFB, FL 32542-5000.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC. 2751, ET SEQ.). VIOLATIONS OF THESE EXPORT CONTROL LAWS ARE SUBJECT

TO SEVERE CRIMINAL PENALTIES.

DESTRUCTION NOTICE - FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

NOTES:

1. INTERPRET DRAWING IAW MIL-STD-100 AND ASME Y14.5M-1994.

2. REMOVE ALL BURRS AND SHARP EDGES .06 MAX.

3. IDENTIFY AS “18894-X200025025-01”, BY BAG, TAG OR BOX, IAW MIL-STD-130.

4. MATERIAL: 3.00 ROUND, 303 STAINLESS STEEL, ASTM A581.

5. WORKMANSHIP:

ALL PARTS SHALL BE IN THE CONDITION SPECIFIED BY THE DRAWINGS AND SHALL BE FREE

FROM DEFECTS SUCH AS, BUT NOT LIMITED TO, BLEMISHES, BURRS, CAVITIES, PITS, VOIDS, CORROSION, CRACKS, DENTS, DISTORTION, WARPAGE, GOUGES, SCORES, NICKS, INCLUSIONS, LAPS, POROSITY, SLIVERS, AND OTHER FOREIGN MATTER. EXCEPT AS PROVIDED ON THE

DRAWING, CLEANING SHALL BE THOROUGH TO REMOVE ALL DIRT, CHIPS, GREASE, OIL, FLUX, CHEMICAL DEPOSITS, RESIDUES, AND OTHER FOREIGN MATTER. THE CLEANING METHOD

AND AGENTS USED SHALL NOT BE INJURIOUS TO ANY PART OR TO THE ENVIRONMENT, NOR

SHALL ANY PART BE CONTAMINATED BY THE CLEANING AGENT.

A

A

SECTION A-A

.3508X

.1508X

8X .015 X 45v CHAMFER

128 DP DIAMOND KNURL

IAW ASME B24.6-94

3X .08 X 45v R .038X

O 3.00

BEFORE KNURL

O 2.510 +.010 -.005

45°8X u1v

O 2.780 +.005 -.000

R .0316X

1.40

REVISIONS

LTR DESCRIPTION DATE APPROVED

A NEXT ASSY/USED ON WAS FINAL ML 20020116 20020122 E.J.Z.

REDRAWN WITHOUT CHANGE. FILENAME WAS

200025025-01_A.PRT ZF 20050103

1/6/2005 M. LAPEE

Lines 18-19, JDAM Strake Alignment Tool

/ASCII85EncodePages false /AllowTransparency false /AutoPositionEPSFiles true /AutoRotatePages /All /Binding /Left /CalGrayProfile (Dot Gain 20%) /CalRGBProfile (sRGB IEC61966-2.1) /CalCMYKProfile (U.S. Web Coated \050SWOP\051 v2) /sRGBProfile (sRGB IEC61966-2.1) /CannotEmbedFontPolicy /Warning /CompatibilityLevel 1.4 /CompressObjects /Tags /CompressPages true /ConvertImagesToIndexed true /PassThroughJPEGImages true /CreateJDFFile false /CreateJobTicket false /DefaultRenderingIntent /Default /DetectBlends true /ColorConversionStrategy /LeaveColorUnchanged /DoThumbnails false /EmbedAllFonts true /EmbedJobOptions true /DSCReportingLevel 0 /EmitDSCWarnings false /EndPage -1 /ImageMemory 1048576 /LockDistillerParams false /MaxSubsetPct 100 /Optimize true

/OPM 1

/ParseDSCComments true /ParseDSCCommentsForDocInfo true /PreserveCopyPage true /PreserveEPSInfo true /PreserveHalftoneInfo false /PreserveOPIComments false /PreserveOverprintSettings true /StartPage 1 /SubsetFonts true /TransferFunctionInfo /Apply /UCRandBGInfo /Preserve /UsePrologue false /ColorSettingsFile () /AlwaysEmbed [ true /NeverEmbed [ true /AntiAliasColorImages false /DownsampleColorImages true /ColorImageDownsampleType /Bicubic /ColorImageResolution 300 /ColorImageDepth -1 /ColorImageDownsampleThreshold 1.50000 /EncodeColorImages true /ColorImageFilter /DCTEncode /AutoFilterColorImages true /ColorImageAutoFilterStrategy /JPEG /ColorACSImageDict << /QFactor 0.15 /HSamples [1 1 1 1] /VSamples [1 1 1 1] /ColorImageDict << /QFactor 0.15 /HSamples [1 1 1 1] /VSamples [1 1 1 1] /JPEG2000ColorACSImageDict << /TileWidth 256 /TileHeight 256 /Quality 30 /JPEG2000ColorImageDict << /TileWidth 256 /TileHeight 256 /Quality 30 /AntiAliasGrayImages false /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict << /QFactor 0.15 /HSamples [1 1 1 1] /VSamples [1 1 1 1] /GrayImageDict << /QFactor 0.15 /HSamples [1 1 1 1] /VSamples [1 1 1 1] /JPEG2000GrayACSImageDict << /TileWidth 256 /TileHeight 256 /Quality 30 /JPEG2000GrayImageDict << /TileWidth 256 /TileHeight 256 /Quality 30 /AntiAliasMonoImages false /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict << /K -1 /AllowPSXObjects false /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 /PDFXOutputIntentProfile () /PDFXOutputCondition () /PDFXRegistryName (http://www.color.org) /PDFXTrapped /Unknown

/Description << /FRA <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> /ENU (Use these settings to create PDF documents with higher image resolution for improved printing quality. The PDF documents can be opened with Acrobat and Reader 5.0 and later.)

/JPN <FEFF3053306e8a2d5b9a306f30019ad889e350cf5ea6753b50cf3092542b308000200050004400460020658766f830924f5c62103059308b3068304d306b4f7f75283057307e30593002537052376642306e753b8cea3092670059279650306b4fdd306430533068304c3067304d307e305930023053306e8a2d5b9a30674f5c62103057305f00200050004400460020658766f8306f0020004100630072006f0062006100740020304a30883073002000520065006100640065007200200035002e003000204ee5964d30678868793a3067304d307e30593002> /DEU <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> /PTB <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> /DAN <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> /NLD <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> /ESP <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> /SUO <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> /ITA <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> /NOR <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> /SVE <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> >> setdistillerparams /HWResolution [2400 2400] /PageSize [612.000 792.000] >> setpagedevice