High_Reach_Repair_PWS.pdf

PERFORMANCE WORK STATEMENT

High Reach Truck – Boom Repair & Testing

934th MISSION SUPPORT GROUP 12 June 2019

1. DESCRIPTION OF SERVICES/PROJECT SCOPE

A. Scope. The contractor shall provide all labor, tools, equipment, test equipment, material, parts, quality control, transportation, inspection, personal, protective equipment and clothing, necessary to perform Boom Lift Repair on the High Reach Truck.

B. Known Problems. Structure welds: elbow has 4” crack in steel, right side, just before upper boom.

2. DEFINITIONS

Replace: Upper boom assembly and all associated parts and labels.

Testing: Certified dielectric and load tests will be completed on the vehicle after completion of repairs.

A. Requested Services. The contractor shall bring the boom lift back into compliance with Federal Safety Standards.

B. Nomenclature: Upper Boom Assembly Manufacture: Altec Model No: AA600L Serial No: 0308-J4255 Mf Date 1 April 2008 113 hrs

C. The government will deliver and pick-up, upon completion of repairs, the equipment within a 50 mile radius of Minneapolis St Paul Air Reserve Station. If the contractor is outside the 50 mile radius, the Contractor shall pack (Bldg. 745) and ship the equipment to include vehicle and boom to their facility. The Contractor, upon completion of the repairs shall pack and ship the equipment to include vehicle and boom to Minneapolis St Paul Air Reserve Station building 745. The Contractor shall demonstrate to the POC that all aspects of the system are properly functioning in accordance with (IAW) the manufacturer’s specifications, industry standards, and this PWS. Upon repair completion, structural load test and dielectric test certifications shall be provided.

D. Over and Above (O&A): O&A work means work discovered during the course of performing the repair efforts that is within the scope of the contract and necessary in order to satisfactorily complete the contract. O&A shall be completed IAW Defense Federal Acquisition Regulation Supplement (DFARS) 252.217-7028.

3. SPECIFICATIONS

A. The vendor will follow all industry and manufacturer standards, as well as, OSHA and DOT specifications when repairing/replacing and testing the boom.

B. Hours of Operation: The Contractor shall perform transportation service under this contract during the following days and hours: Monday through Friday, 7 a.m. to 2 p.m. central time. If work hours are required outside the hours stated, the Contractor shall contact the COR for approval from the CO. Upon approval from the CO. Prior to pick up or delivery, the contractor shall provide a 48 hour notification by contacting the POC below for coordination.

C. Government Furnished Services (GFS): The government will deliver and pick up upon completion of repairs the equipment within a 50 mile radius of Minneapolis St Paul Air Reserve Station.

4. WARRANTY

The warranty on the completed work shall be the industry and manufacturer standard.

5. TIME FRAME

The time frame for repairing the vehicle shall not exceed 90 days from the day the trailer is delivered to the vendor.

6. POINTS OF CONTACT

A. Primary - Mr. Erik Swan (612) 713-1190

B. Alternate- Mr. Kirby Schueler (612) 713-1091