FA5706-15-R-0005_Amendment_0004.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE

2. AMENDMENT/MODIFICAITON NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicble)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICIATION NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 11)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a)By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPIRATION DATA (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

NSN 7540-01-152-8070

Previous edition unusable

AMENDMENT OF SOLICITATION NO.

2. AMENDMENT/MODIFICATION NO.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

See Schedule

FA5706

SEE SCHEDULE

FA5706 380 ECONS

UNIT 1 BOX 1

APO AE 09853-5350

FA5706

FA5706 380 ECONS

UNIT 1 BOX 1

APO AE 09853-5350

25-Mar-2015

FA5706-15-R-0005

25-Mar-2015

22-Feb-2015

Contracting Officer: Rebecca Emerson Phone: +971(0)50-641-7476

The purpose of this amendment is to revise the Statement of Work, extend the proposal due date and time, and answer questions about the solicitation and seed project. Please see continuation page.

Rebecca Emerson +971(0)50-641-7476 380ECONS.Construction@adab.afcent.af.mil

The Statement of Work revised 18 March 2015 is removed and replaced with the Statement of Work revised 23 March 2015. Revisions to the SOW are identified on page 3 of the SOW.

The proposal due date and time is extended from 29 March 2015 by 4:00PM local time to 12 April 2015 by 4:00PM local time.

Questions and Answers Set 4 from 19 Mar to 24 Mar

Q1. What is the grade and strength of concrete to be used for foundation and grade slabs?

A1. 28 MPa (4,000 psi). The SOW has always reflected 28 MPa (4,000 psi), the design also reflects 28 MPa (4,000psi). Amendment 3 corrected the mistake that showed 32 MPa (4,000psi).

Q2. Is the offeror responsible for providing the communication equipment e.g. switches, cabinets in the communication room?

A2. The offeror is responsible for installing everything in accordance with the solicitation and ADAB General Specification. See Section 12, FIRE ALARM, ELECTRICAL AND COMMUNICATIONS in the ADAB General Specification.

Q3. Is the existing HDPE size of 150 mm ID or OD?

A3. All pipe sizes shown are nominal internal diameter (ID).

Q4. Please confirm which valve (gate or blind flange) is required by the project?

A4. Gate Valves are required with a 150mm stub out pipe with blind flange for future tie-ins. Sheet C-3 specifies the locations of the gate valves and the blind flanges. All valves shall be in accordance with ADAB General Specification requirements 2.7-2.12.

Q5. Is the contractor responsible for connecting the manual transfer switch to the existing 400V branch breaker and circuit breaker part of the generator?

A5. No, per sheet E-8, the contractor is only responsible for connecting the manual transfer switch to the existing CSS (800A, 400V Branch Breaker) and the new main distribution panel.

Q6. Can you provide examples of “Government move duration” and “Government only actions” as stated in Subfactor 3- Construction phasing?

A6. Government-move durations do not apply to this project and will be removed via an amendment to the solicitation. Government-only actions that need to be accounted for in the phasing plan are those that require the contractor to coordinate a utility shut down with the government in order to tie into the existing infrastructure. This is in accordance with paragraphs identified at 3.22.5 through 3.22.6.2 in the

SOW.

Q21 from Set 2’s Q&As. As per Attachment 2 – Statement of work clause 2.3 (Page 3), it is mentioned Government’s recommended Performance Period is 180 Calendar Days. But, this duration is quite less, as more than 65 days are required to get Emirati + DBIDS pass. Please extend the duration of this project by 65 days to accommodate the time required for pass issuance.

A22 revision. NTP will be issued once badges are obtained. Badge applications, company registration and all other paperwork required by the Host Nation, is expected to be submitted to the Emiratis immediately after receiving the notice of award. The period of performance will remain at 180 Calendar Days.

Q15 from Set 3’s Q&As. What countries are eligible to participate in this solicitation?

A15 revision. As identified at FAR 25.701(b), “most transactions involving Cuba, Iran, and Sudan are prohibited. In addition, lists of entities and individuals, subject to economic sanctions are included in OFAC’s [Office of Foreign Assets Control] List of Specially Designated Nationals and Blocked Persons at http://www.treas.gov/offices/enforcement/ofac/sdn/.”

Attachments:

- 15. FA5706-15-R-0005 Atch 2 - Statement of Work revised 23 March 2015