SALIENT Characterstics.pdf
PDF 136 KB Posted
- Attached to
- EMXS Heat Treat Ovens
- Solicitation number
- FA570224QC015
About this file
This document is a memorandum from the 379th Expeditionary Maintenance Squadron (EMXS) describing the salient characteristics required for a heat treating oven. The key requirements are: dual chamber with at least 18"x12"x48" work area, external TUS ports, roll-out quench tank, chamber temperature range of 200-2000 degrees F with specified temperature uniformity accuracy, and rapid cooling capabilities for aluminum alloys.
The related federal contract opportunity is a pre-solicitation for EMXS Heat Treat Ovens at Al Udied Air Base in Qatar. The Department of the Air Force, Air Combat Command is the procuring agency. The solicitation number is FA570224QC015, and this Sources Sought notice is requesting information from potential vendors who can meet the salient characteristics outlined in the memorandum.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SOURCES SOUGHT Heat Treat Oven.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
UNITED STATES AIR FORCE CENTRAL COMMAND (USAFCENT)
379TH EXPEDITIONARY MAINTENANCE SQUADRON
Mission First! ~ Airmen ~ Partners
5 August 2024
MEMORANDUM FOR RECORD
FROM: 379 EMXS/MXMFM
SUBJECT: Heat Treating Oven Salient Characteristics
1. The following Characteristics reflect the needs (must haves) of the Aircraft Metals Technology section, and should be utilized when sourcing an oven:
a. Dual Chamber oven with at least 18”x12”x48” work area.
b. Includes external TUS (Temperature Uniformity Survey) ports.
c. Roll out quench tank to ensure 5 second quench standard is met IAW T.O 1-1A-9
Table 3-11.
d. Chamber with a maximum temperature of 2000deg with a +/- 15deg temperature uniformity accuracy (Required to meet class 3 equipment specification in the AMS 2750)
e. Chamber with a temperature range of 200deg-1200deg with a +/- 5deg temperature uniformity accuracy (Required to meet class 1 equipment specifications in the AMS 2750)
f. Rapid cooling capabilities for the heat treatment of Aluminum alloys in the same chamber with minimal delay between solution heat treating and precipitation heat treating (as outlined in the T.O 1-1A-9 table 3-10 and 3-14)
2. This memorandum supersedes all previous letters or memorandums on the same subject. If any of the characteristics above cannot be met, please contact TSgt Smith, Rickey at 455-5041.
RICKEY H. SMITH, TSgt, USAF AMT Section Chief, 379th EMXS
| 2024-08-05T09:47:07+0300 | |
| SMITH.RICKEY.HEATH.1514758880 |
File details come from the government source that posted it. Updated .