Combo_Attachment_-_Ankara_ASF_Warehouse_Specifications_(30Apr14).pdf

Ankara Warehouse Upgrade Supplies Specifications

CLIN Description of Item Qty Unit

Unit Price

Amount

Hot Water Boiler, ALARKO Model (or Equal) ACK2-200, 200KCal/Hr, Steel, Double Walled, insulated, capable of being fired using fuel oil or natural gas. Boiler dimensions will be 1425cm Long, 923cm Wide and 1104cm High. Boiler will be equipped with both pressure and temperature gages; and have an adjustable safety relief valve installed and rated at a minimum of

6.5 ATM and a maximum of 10.0

ATM. Boiler will be configured with two 4-inch ID flanged pipe connections for connection to the heating loop collectors, one ¾ to 1.0-inch ID connection for fresh water inlet and one 1.0-inch ID drain equipped with a ball or gate valve. 1 Each

Fuel Boiler Burner, ALARKO Model (or Equal) ALF 24-T, 8.5- 24.5Kg/Hr. The burner will fire using DF-2 [diesel fuel] and be an accessory item of boiler supplied 1 Each

Control Panel Group, ALARKO or Equal. The control panel may be separate from the burner, such as the ALARKO panel or be an integral part of the burner. The panel or burner control system consists of a flame control brain, a power relay, a single or three phase power circuit breaker, and an ON/OFF switch. 1 Each

Boiler Chimney, Stainless Steel, Fabricated to Order

Vendor will make measure- mints and fabricate for user installation.

The chimney will be 9 [nine] meters in height. The diameter of the chimney will match the diameter of 1 Each the boiler’s exhaust outlet.

[approximately 25cm]

Double Walled Fuel Tank, w/ Alarm System, Made to Order

6-Ton capacity, approximate size 265cm Length X 172cm Diameter.

The tank will be fabricated of non-galvanized steel, with corrosion protection applied on all outside surfaces. The tank will be equipped with three female NPT connections through the inside tank wall of ¾ or 1.0-inch ID. One located at the top of the tank, one located at the bottom of the tank for water drainage, one located at the end of the tank, 3.5 inches above the bottom of the tank. At the opposite end of the tank two more ¾-inch ID female NPT fittings will be installed for a magnetic float fuel level indicator. Two more ¾-inch female NPT connections will be installed to the outside tank wall only for the purposes of leak detection. One connection will be at the bottom of the tank, one at the top. Tank will be fabricated in accordance with the following standards – EN14214, ASTM D 6751, DIN EN 14214

BS EN 14214. 1 Each

Hot Water Circulator Pump, 10m3/Hr, 6mSS

VITO or Equal. Water pump will be of cast steel with either a bronze or special cast steel impeller. Power will be 220/380V three phase and be equipped with a rotation indicator.

The pump will be of the ‘wet rotor’ type. 2 Each

Pump Collector Manifold, 1.5 Meter Long, DN150, made to Order, Vendor has the option to make measurements to verify proper fabrication for user installation.

Each

Collector manifold will be fabricated using a minimum size of 100mm ID pipe casing with one 4-inch ID flanged pipe inlet, two 3-inch ID flanged pipe outlets and one 1.0-inch ID drain equipped with ball or gate valve. Collector will be insulated against heat loss.

Collector will be fabricated free-standing for mounting to the floor of the mechanical room.

Air Handler Unit, Gunter/ALARKO (or Equal) 10/12,000kCal/Hr, 1,600m3/Hr. The fan will be either axial blower or multi-blade type.

The air handler will have diversion vanes installed in order to force the heated air downward 16 Each

Closed Expansion Tank, 300 Liter Capacity, approximate size is

123cm Height X 64cm Diameter.

The tank will have a captive air bladder, capable of being serviced with compressed air as necessary through an air chuck. NEMA Makine Ltd, Sti Model NEX DIK

300 or equivalent, rated at an operational pressure of 10ATM, maximum 1 Each

Mounting Hardware (Pipe, Panel, Air Handler) 1 Group

Pipe Flange, Forged Black Steel, Non-Galvanized, DN 20-100 ETM or Equal 1 Group

Globe Valve, Bronze Alloy, DN 80

ETM or Equal 2 Each

Globe Valve, Bronze Alloy DN 65

ETM or Equal 4 Each

Globe Valve, Bronze Alloy DN 50

ETM or Equal 4 Each

Globe Valve, Bronze Alloy DN 40

ETM or Equal 16 Each

Flexible Connection Line, Stainless Steel, with pipe fittings at each end, DN40

ECA or Equal 16 Each

Threaded Black Steel [Non-

Galvanized] Pipe, 3/4 inch ID 26 Each

(inside diameter) X 6 meter length, Borosan or Eskihisar or Equal

Threaded Black Steel [Non- Galvanized] Pipe, 1.0-inch ID X 6 meter length, Borosan/Eskihisar or

Equal 24 Each

Threaded Black Steel [Non- Galvanized] Pipe, 1.5-inch ID X 6 meter length, Borosan or Eskihisar or Equal 30 Each

Threaded Black Steel [Non- Galvanized] Pipe, 2.0-inch ID X 6

Borosan or Eskihisar or Equal 90 Each

Threaded Black Steel [Non- Galvanized] Pipe, 3.0 inch ID X 6

Borosan or Eskihisar or Equal 70 Each

Threaded Black Steel [Non- Galvanized] Pipe length, 4.0-inch

ID X 6 meter, Borosan or Eskihisar or Equal 34 Each

Pipe insulation, Foil Backed, Formed, 3/4-inch x 6 meter length Outside Diameter Estimate (ODE) 26 Each

Pipe Insulation, Foil Backed, Formed, 1.0-inch x 6 meter length

(ODE) 24 Each

Pipe Insulation, Foil Backed, Formed, 1.5-inch x 6 meter length

(ODE) 30 Each

Pipe Insulation, Foil Backed, Formed, 2.0-inch x 6 meter length

(ODE) 90 Each

Pipe Insulation, Foil Backed, Formed, 3.0-inch x 6 meter length

(ODE) 70 Each

Pipe Insulation, Foil Backed, Formed, 4.0-inch x 6 meter length

(ODE) 34 Each

Paint, Hard Enamel, Red, 20 liter pail

Marshall Boya or Equal 9 Pail

Total: