Attachment 4 - Questions and Answers.pdf
PDF 70 KB Posted
- Attached to
- F-16 Tail Stand, Aviano AB, Italy Federal contract opportunity
- Solicitation number
- FA568224Q8062
About this file
This document appears to be a set of Questions and Answers related to a federal contract opportunity for an F-16 Tail Stand at Aviano Air Base in Italy.
The key details are:
- The tail stand will be used for sanding and painting operations on the F-16 aircraft.
- The horizontal stabilizer of the aircraft measures 100 inches fore to aft and extends 70 inches outward, and is mounted 71 inches high from the floor.
- The tail dock will cover the entire width of the tail, including the horizontal stabilizer.
- The solicitation number is FA568224Q8062 and the federal agency is the Department of the Air Force United States Air Forces in Europe - Air Forces Africa.
- Vendors are invited to submit any additional questions by July 18, 2024 at 1600 CET to the points of contact provided.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA568224Q8062 COMBINED SYNOPSIS - Amended.pdf | ||
| Attachment 1 - Provisions and Clauses.pdf | ||
| FA568224Q8062 COMBINED SYNOPSIS.pdf | ||
| Attachment 3 - Salient Characteristics.pdf | ||
| Attachment 2 - 52.212-1 Instructions to Offerors.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Question and Answers
1. What is the Minimum height off the ground that is required for the base height of the platform walking surface?
a. NO ANSWER
2. Are there Hangar space limitations in the aft of the aircraft for access the Tail Stand
Access Stairs?
a. NO ANSWER
3. The tail dock will cover the complete height of the tail or just the horizontal stabilizer?
a. The tail dock will cover the entire width of the tail, over the horizontal stabilizer.
The horizontal stabilizer measures 100 inches fore to aft and extends 70 inches outward from the aircraft. It is mounted 71 inches high, measured from the floor.
4. If the dock requires a height adjustment system, if that is the case, a manual or electrical/hydraulic one?
a. The tail dock will cover the entire width of the tail, over the horizontal stabilizer.
The horizontal stabilizer measures 100 inches fore to aft and extends 70 inches outward from the aircraft. It is mounted 71 inches high, measured from the floor.
File details come from the government source that posted it. Updated .