Statement_of_Work.docx

8/28/18

Statement of Work For Wire Guided Vehicle

The contractor must:

· Provide a man up truck, so operatives can hand pick smaller size property for issue to various on base back shops.

· Perform Familiarization Training on vehicle to Warehouse operatives at the time of delivery. This training shall consist of the following:

· How to safely operate the picker.

· How to charge the picker.

· How to operate the picker during emergency actions.

· Remove the Old Battery Charger will install new charger test it for correct operation.

· Transport new vehicle to RAF Lakenheath (building 1035) unloaded, installed, and tested for correct operation in Warehouse (01A Building 1035).

Specs must include:

· Vehicle must be able to drive forward and backawards.

· Mast: 6095mm.

· Closed Height: 2415mm.

· Forks: 1200mm Adjustable.

· Power: Electric Programmable; this vehicle will be used indoors.

· Transmission: Electronic Programmable.

· Charger: 12 Hour, must be 3 Phase Charger.

· Battery: 48 Volts 460 Ah.

· Capacity: 1000Kg @600mm Load Center.

· Rail: 1730mm Existing Rail already fitted.

· Fitted Seat Belts

· Working Lights

· Beacon

· Reversing Bleeper

· Extra Stop Magnets Needed Per Aisle and new Wires if existing are not combatable with new Picker.

· Must be able to hold the existing work platform/cage. The measurements on this cage are: Width 4 ft, Height 3 ft 7 in, Depth 2 ft 6 in.

SME POC: MSgt Matthew Peterson Tel: 44 1638 52 5324

DSN 226-5324