Attachment_2_-_Laser_Etcher_SOO.pdf

For Official Use Only (FOUO)

DEPARTMENT OF THE AIR FORCE

48th Fighter Wing (USAFE)

20 July 2018

MEMORANDUM FOR WHOM IT MAY CONCERN

FROM: 748 AMXS/RA

SUBJECT: Statement of Objectives for the purchase of a Laser Etcher

1. This statement of Objectives is to define the salient characteristic of a Duel Function (CO2, Fiber) Laser Etcher

2. Requirements/specifications are as follows

SPECIFICATIONS:

The product may be an Epilog Fusion M2 40 or equal/better Associated Drawing software to be included upon delivery via sales representation

Engraving Area: (1016 mm x 711 mm) (40 in x 28 in) Laser Wattage: 50 Watt CO2 and 30 Watt Fiber

Maximum Material Thickness: CO2 (337 mm) (2 in) and Fiber (311 mm) (3 in) Size (W x D x H): (1537 x 1048 x 1073 mm) (60.5 in x 41.25 in x 42.25) Weight: 643 LBS (292 kg)

Air Cooled, all Metal Waveguide Tube High Resolution Lens - 2.0" for CO2, 3.0" for Fiber High Speed Servo Motor Control System Red Dot Pointer Installation & Training Included upon delivery via sales representation Fusion 40 Cutting Grid Air Assist Pump Extraction Unit - Fully Filtered

WARRANTY

24 months on mechanical and electrical components including the tube (laser source) with the exception of the motors which have a 36 month warranty.

3. Contractor requirements

Point of contact (POC). The contractor shall designate in writing a single point of contact to the contracting office for any maintenance service required for this purchase. This information shall include name, title, address, and telephone number.

Telephone assistance. The contractor shall provide telephone assistance during business hours 0800 hrs through 1600 hrs. GMT for equipment covered under this contract excluding federal/British holidays.

The designated government point of contact (POC) shall be able to call and receive assistance.

Updates. The contractor shall provide all update to include: installing manufacturer designed and issued field modifications, safety corrections, and revisions for correcting equipment deficiencies. The contractor shall provide adequate training on the equipment and in conjunction with any required modifications made by the contractor IAW manufacturer’s recommendation or to support industry standards.

Normal hours of call out coverage are Monday through Friday, 0700-1600 hrs. Excluding federal/British holiday. All service/repairs shall be performed during normal hours of coverage unless requested or approved by the designated government POC. Response Time: The contractor must respond with a phone call to the designated government POC within 1 business day after telephone notification. If the problem cannot be corrected by phone, the contractor will commence work on-site during normal hours of coverage. United States Federal holidays observed.

KEVIN S. CARTER, MSgt, USAF 48 MXG Resource Advisor