Atch_1_-_PWS_final_-_Oct_2017.pdf

RFQ NO.: FA5270-17-T-0014

Attachment 1

PERFORMANCE-BASED WORK

STATEMENT

for Acquisition of Environmental

Samples of Waste Water, Hazardous Waste &

Environmental Releases at Various Locations Okinawa, Japan

718 CES/CEIE

KADENA AIR BASE

1 October 2017

PERFORMANCE WORK STATEMENT

TABLE OF CONTENTS

SECTION PAGE

1.0 DESCRIPTION OF SERVICES 2

2.0 SERVICES SUMMARY 2

3.0 ENVIRONMENTAL ACTIVITIES 3

3.1 SAMPLING REQUIREMENTS 3

3.2 COLLECTION OF SAMPLES 3

3.3 WASTE WATER COMPLIANCE (ROUTINE) SAMPLING 3

3.4 HAZARDOUS WASTE CHARACTERIZATION (ON-CALL) SAMPLING 4

3.5 ENVIRONMENTAL RELEASE (ON-CALL) SAMPLING 4

3.6 CONTRACTOER PERSONNEL 5

3.7 ACCESS TO GOVERNMENT FACILITIES 5

4.0 GOVERNMENT FURNISHED PROPERTY AND SERVICES 5

5.0 GERNERAL INFORMAION 5

5.1 CHANGES IN SCOPE 5

5.2 PERFORMANCE REVIEW 5

5.3 SECURITY REQUIREMENTS 5

5.4 HOURS OF OPERATION 6

5.5 RECORDS 6

5.6 ENVIRONMENTAL CONTROLS 6

5.7 GOVERNMENT OBSERVATIONS 7

5.8 SAFETY REQUIREMENTS 7

5.9 TRAINING 8

5.10 SPECIAL QUALIFICATIONS 8

5.11 CONTRACTOR PERSONNEL 8

5.12 JAPANESE ROAD LAWS 9

5.13 REQUIRED INSURANCE (In addition to that required by Japanese Law) 10

6.0 PERFORMANCE PERIOD 10

7.0 APPENDICES 11

1.0 DESCRIPTION OF SERVICES

The contractor shall provide all management, tools, supplies, transportation, equipment, labor and other items and services necessary to perform Environmental Sampling of Waste Water, Hazardous Waste & Environmental Releases at Kadena Air Base (KAB), Camp Courtney, Camp McTureous, Okuma and other locations, Okinawa, Japan as may be required by 718 CES/CEIE to meet the requirements in the Japan Environmental Governing Standards (JEGS). These services may be monitored by a Waste Water (WW) Quality Inspector (QI) and/or a Hazardous Waste (HW) QI of the Environmental Office who will verify that work is completed in accordance with this specification.

2.0 SERVICES SUMMARY

The Contractor service delivery requirements are summarized into performance objectives that relate directly to standards of performance required to meet mission essential needs. For the Performance Objective to be met, service delivery must be in substantial compliance with applicable performance standards. The Performance Threshold describes the minimum overall levels of service delivery required for acceptable quality control. Failure to meet these Performance Thresholds means that contractor Quality Control is unacceptable. The following is a list of the key performance objectives that will be verified as contractually compliant by government personnel; however, inspection of any contract requirement is authorized.

Table 2-1, Performance Objective Thresholds

Performance Objective PWS Reference Performance Thresholds

Environmental Sampling Activities

Para. 3.0 all inclusive See Appendices F and G; 100% collection of all samples on same day and within 15 minutes of OPG sample collection

Collection of Samples Para. 3.2 Date and time to be determined

Waste Water Compliance Para. 3.3; 3.3.1; 3.3.2;

3.3.3 all inclusive

See Appendix F; 95% on-time collection of all samples for MFH and O&M

Hazardous Waste Sampling Para. 3.4; 3.5 all inclusive Via email by 718/CES/CEIE – required 2 days before sampling

Environmental Release (On- Call) Sampling

Para. 3.5 all inclusive Routine Env. Release 3 days of email/phone call; emergency Env.

Release on KAB within 4 hrs and if off KAB by other duty day

3.0 ENVIRONMENTAL SAMPLING ACTIVITIES

3.1 SAMPLING REQUIREMENTS

Samples collected under this contract will be documented on the appropriate chain of custody;

Form 2, Request for Laboratory Services, will be used. See appendix E for examples. The appropriate form will accompany each sample delivered to 18 AMDS/SGPL for analysis. For Hazardous Waste, multiple samples of the same type, requiring the same analysis may be identified on a single Form 2.

3.2 COLLECTION OF SAMPLES

The contractor will only collect samples on dates and at times such that the samples collected may be delivered to and analyzed by 18 AMDS/SGPL so as not to exceed sample holding times.

The contractor will establish, at least a week in advance, longer if possible, the dates and times 18 AMDS/SGPL will be closed for military activities such as family days, exercises and other special circumstances to avoid collecting un-useable samples. All samples that cannot be collected as specified due to weather or other unreasonable circumstances shall be collected at times agreed upon by the Environmental QI so as to allow effective sample collection and safe working conditions for the contractor’s personnel.

3.3 WASTEWATER COMPLIANCE (ROUTINE) SAMPLING

Okinawa Prefectural Government Annual Sampling. If the Okinawa Prefecture Government (OPG) collects Discharge Monitoring and Public Water Body samples, the contractor shall perform side by side waste water sampling with the OPG. Public Water Body samples are typically collected just offshore in water waist deep or less. The number, location and analysis of samples will be determined by OPG and may not be the same for each succeeding year. Locations previously sampled are listed but may not include all locations the OPG could choose to sample. Samples to meet this requirement will be collected on the same day, in the same place and within 15 minutes of the time that OPG collected their samples.

Appendix G shows the number of samples from each location, the locations and the parameters requested by OPG for 2008.

Monthly Sampling Requirements. Sampling will be conducted during the first full week of each month or as soon thereafter as weather will permit as agreed upon by the contractor and the Environmental Program Manager/QI located at the building 3621. Appendix F shows the sample schedule, the locations, and the parameters required. Maps to each sampling point are provided in Appendix B.

Annual Sampling Requirements. Additional parameters may be required at each sampling point on an annual basis. These samples will be collected at the same time as the monthly samples and will not require a separate trip for collection therefore the costs for annual sampling should not include transportation costs. Appendix F shows the sample schedule, the locations, and the parameters required.

3.4 HAZARDOUS WASTE CHARACTERIZATION (ON-CALL) SAMPLING

3.4.1 All sampling requirements for Hazardous Waste Characterization will be requested via email by 718 CES/CEIE personnel at least two duty days before the sampling is required.

3.4.1.1 The request will include a POC (normally someone appointed to HWAP duties) and phone number at the sampling location, the sampling location, the waste stream being sampled and the test methods required for analysis. Sampling locations for Kadena AB include Kadena Marina and the Munitions Storage Area. In the event that sampling is required in the Munitions Storage area, 718 CES/CEIE will provide an escort.

3.4.1.2 The contractor will schedule a mutually agreed upon time for the sampling with the sampling site POC within 14 calendar days of the request. Contractor personnel will not handle, move, open or close containers to obtain samples as these activities will be accomplished by the sampling site POC.

3.4.2 Samples of hazardous waste must be collected from containers that are at least ¾ full.

When the contractor discovers that a sample cannot be taken because the container is not ¾ full, the contractor will notify the HW QI to determine if the sample can be collected or if the sampling event must be abandoned.

3.4.3 The contractor will determine the appropriate method of sampling and the sample size based on industry standards and 18 AMDS/SGPL requirements.

3.4.4 The Government will arrange escorts and transportation to sampling locations in the flight-line area if contractor access to the flight-line is not granted to contractor at no fault of the contractor.

3.5 ENVIRONMENTAL RELEASE (ON-CALL) SAMPLING

3.5.1 All sampling requirements for Environmental Release Sampling will be requested by email from 718 CES/CEIE personnel. Emergency Environmental Release Sampling may be requested by phone with an email confirmation from 718 CES/CEIE personnel no later than the next duty day. Routine samples must be collected within 3 duty days of the sampling request and emergency samples must be collected within 4 hours of the sampling request for locations on KAB. Sample collection deadlines for emergency sampling at locations other than KAB will be established by mutual agreement between the requestor and the contractor at the time of the request.

3.5.2 The Government will arrange escorts to the sampling location, if required. If sampling is required within the flight-line area, transportation within the flight-line area will also be provided by the Government. Environmental Release Sampling will primarily be on Kadena Air Base but could be required at Government Installations anywhere on Okinawa or at public locations where US Government vehicles and their cargos could be responsible for environmental releases.

Delays in meeting the sampling deadlines due to non-availability of government transportation or escorts will extend the sampling deadline by the duration of the delay.

3.5.3 The contractor shall determine the appropriate method of sampling and the sample size based on industry standards and 18 AMDS/SGPL requirements.

3.6 CONTRACTOR PERSONNEL

Project Manager. The contractor shall have a project/site manager fluent in both English and Japanese to conduct communication between Government (US or Japan) personnel and the contractor’s employees. The project manager shall also conduct or direct the collection of data in English for submittal to the Government.

Contractor’s Employees. Contractor’s employees must be able to communicate in English with enough ability to understand on-base Security Force officers. Employees shall be properly equipped and trained to use personnel protection equipment needed for the collection of all samples. The contractor is responsible for determining the personnel protective equipment required for each sampling event. The contractor is NOT responsible for moving, positioning, opening or closing hazardous waste containers to be sampled.

3.7 ACCESS TO GOVERNMENT FACILITIES

The contractor shall provide all information and coordination necessary to obtain access badges and passes for contractor personnel and vehicles for each installation to perform the sampling activities required at those installations.

4.0 GOVERNMENT FURNISHED PROPERTY AND SERVICES

Reserved.

5.0 GENERAL INFORMATION

5.1 CHANGES IN SCOPE

Any matter concerning a change to the scope, prices, terms or conditions of this contract shall be referred to the Contracting Officer (CO).

5.2 PERFORMANCE REVIEW

The services to be performed by the contractor during the period of this contract shall, at all times and places, be subject to review by the CO, QI, or authorized representative(s).

5.3 SECURITY REQUIREMENTS

Security and base access requirements are contained in clause 5352.242-9000 “Contractor Access to Air Force Installations.” Contractor employees will be required to obtain and display identification badges. Anticipate delays in getting commercial vehicles on base and allow time for commercial vehicles to reach their destination by driving designated routes at posted speed limits throughout the base. Procedures for commercial vehicle access to the base are subject to change without prior notice.

ID Passes, Badges and Vehicle Stickers. The contractor is responsible to obtain such clearances and/or passes as required for his/her employees to enter military installations on Okinawa prior to start to work. The contractor shall be responsible for all passes issued to his/her employees under this contract. Applications shall be coordinated through the CO. At the time of application, Security Forces may conduct a background check on employees. Upon termination of employment, the contractor shall be responsible for returning identification cards and base passes to Security Forces within 24 hours.

5.4 HOURS OF OPERATION

Normal Hours of Operation. The contractor shall perform the services required under this contract during the following hours: Mon - Fri, 0800-1630, except federal holidays. The contractor may work, with prior approval of the QI, extended hours to ensure timely completion of work at no additional cost to the government.

Recognized Holidays. The contractor is not required to provide service on the following days. If a holiday falls on a Sunday the following Monday will be observed as a holiday.

Table 5-1, Recognized Holidays

Day Holiday First day of January New Year’s Day Third Monday of January Martin Luther King Jr. Birthday Third Monday of February President’s Day Last Monday of May Memorial Day Fourth of July Independence Day First Monday of September Labor Day Second Monday of October Columbus Day 11 November Veteran’s Day Last Thursday of November Thanksgiving Day 25 December Christmas Day

5.5 RECORDS

The contractor shall be responsible for creating, maintaining, and disposing of only those government required records that are specifically cited in this Performance-based Work Statement (PWS) or required by the provisions of a mandatory directive listed in Appendix D, Applicable Publications and Instructions. If requested by the Government, the contractor shall provide the original record or a reproducible copy of any such record within five working days of receipt of the request.

5.6 ENVIRONMENTAL CONTROLS

Compliance with Laws and Regulations. The contractor shall be knowledgeable of and comply with all applicable JEGS and requirements regarding environmental protection. In the event environmental laws/regulations change during the term of this contract, the contractor is required to comply as such laws come into effect. If there is an increase or decrease in cost as a result of the change, the contractor shall inform the CO pursuant to notice requirements and negotiate a modification to the contract.

Notification of Environmental Spills. If the contractor spills or releases any substance contained in 40 CFR 302 into the environment, the contractor or its agent shall immediately report the incident to Kadena AB Fire Dept. at 911. The liability for the spill or release of such substances rests solely with the contractor and its agent.

Environmental Management System. Per AFI 32-7001 paragraph 5.7, all personnel working at Kadena AB or on behalf of Kadena AB must complete the Environmental Management System (EMS) Awareness training. The training can be completed through the Environmental Occupational Safety Health-Training Network (ESOHTN), (https://esohtn.com/start, password: esohtn). The training must be completed within 90 days of hire date. In the event that the ESOHTN website is not available, contact 718 CES/CEIE (Environmental Office) at 634-2600 for EMS Training Slides. The training slides would need to be briefed to all newly hired personnel and a log of personnel trained maintained for documentation.

5.6.4 Material Storage and Use. Please ensure that all hazardous materials are acquired, stored, and handled in accordance with JEGS, Chapter 5 and AFI 32-7086, Hazardous Materials Management. Any hazardous materials brought onto Kadena Air Base must have an approved AF IMT 3952 coordinated through the 18 SUPS/LGSH (Kadena HAZMART Pharmacy) and approved by 18th WG Safety, Bioenvironmental, and Environmental authorities. Please consult with the Kadena HAZMART Pharmacy at extension 634-7725 for a determination of whether a product is a hazardous material or not.

5.7 GOVERNMENT OBSERVATIONS

Government personnel, other than COs and QI may from time-to-time, with CO coordination, observe contractor operations. However, these personnel may not interfere with contractor performance or make any changes to the contract.

5.8 SAFETY REQUIREMENTS

In performing work under this contract, the contractor shall:

Conform to the safety requirements contained in the contract for all activities related to the accomplishment of the work.

Perform work in a safe manner as required by OSHA 2206, General Industry, Occupational Safety and Health Standards (29 CFR 1910) and JEGS by US Force Japan.

Develop and provide at the start of the orientation period or the start of the first operational performance period (if there is no orientation period) a safety plan for the protection of government facilities and property and to provide a safe work environment for contractor personnel.

Include a clause in all subcontracts to require subcontractors to comply with the safety provisions of this contract as applicable.

Record and report promptly (within two hours) to the CO thru QI, all available facts relating to each instance of damage to government property or injury to either contractor or government personnel.

In the event of an accident/mishap, take reasonable and prudent action to establish control of the accident/mishap scene, prevent further damage to persons or property, and preserve evidence until released by the accident/mishap investigative authority through the CO.

If the government elects to conduct an investigation of the accident/mishap, the contractor shall cooperate fully and assist government personnel in the conduct of investigation until the investigation is completed.

Include a clause in each applicable subcontract requiring the subcontractor's cooperation and assistance in accident reporting and investigation.

5.9 TRAINING

Contractor or contractor’s lead on-site supervisor must have or have the Japanese equivalent of the 40 hour EPA Hazardous Waste Operations Course (HAZWOPER) and remain current with the 8 hour annual refresher course or equivalent in order to collect samples of Hazardous Wastes, Environmental Releases, Waste Water, Asbestos, Lead-Based Paint and other environmental hazards. Contractor or contractor’s lead on-site supervisor will supervise directly or indirectly employees collecting environmental samples and will be responsible for employees proper accomplishment of all activities required under this contract.

5.10 SPECIAL QUALIFICATIONS

Contractor must possess a valid Japanese government-issued business permit to operate as laboratory and have the appropriate certifications and accreditations to perform laboratory analyses on samples of waste water, hazardous waste, Specially Controlled Industrial Waste, Specially Controlled General Waste and asbestos. Reference the 2016 edition of the JEGS for the required accreditations for each analyte and waste category listed. Copies of current certifications and accreditations must be provided with bid proposal to qualify as a bidder for this contract.

On-site supervisors and employees must be respirator qualified and medically evaluated according to 40 CFR 1910.120, 1910.134 and 1926.65 or a Japanese equivalent respirator qualification. Employees must also be able to ascend and descend ladders and stairs with required sampling equipment and materials necessary for the accomplishment of all sampling activities required under this contract.

5.11 CONTRACTOR PERSONNEL

Contract Manager. The contractor shall provide a contract manager and alternate contract manager (responsible in the absence of the contract manager) who shall be responsible for the performance of the services. The names of the contract manager and alternate(s) shall be provided to the CO in writing prior to the beginning of the first performance period. The contract manager and alternate(s) must be able to read, write, speak, and understand English.

5.11.1.1 The contract manager and alternate(s) shall have full authority to act for the contractor on all contract matters relating to daily operations of this contract.

5.11.1.2 The contract manager or alternate(s) shall be available during normal duty hours within two (2) hours to meet on the installation with government personnel (designated by the CO) to discuss problems. After normal duty hours the manager or alternate shall be available within four

(4) hours.

Contractor Employees. The contractor shall not employ persons for work on this contract if such employee is identified to the contractor by the CO as a potential threat to the health, safety, security, general wellbeing or operational mission of the installation and its population.

5.11.2.1 Contractor personnel shall present a neat appearance and be easily recognized as employees. This may be accomplished by wearing distinctive clothing bearing the name of the company or by wearing appropriate badges, which contain the company name and employee name in English.

5.11.2.2 The contractor shall not employ any person who is an employee of the U.S.

Government if employing that person would create a conflict of interest. Additionally, the contractor shall not employ any person who is an employee of the Department of the Air Force, either military or civilian, unless such person seeks and receives approval according to DOD 5500-7-R Joint Ethics Regulation. The contractor shall not employ any person who is an employee of the Department of the Air Force if such employment would be contrary to the policies in AFI 64-106, Operational Contracting Program.

5.11.2.3 The contractor is cautioned that off-duty active military personnel hired under this contract may be subject to permanent change of station, change in duty hours or deployment.

Military Reservists and National Guard members may be subject to recall to active duty. The abrupt absence of these personnel could adversely affect the contractor’s ability to perform;

however, their absence at any time shall not constitute an excuse for nonperformance under this contract.

5.12 JAPANESE ROAD LAWS

5.12.1 The contractor shall comply with Japanese Road Laws while on US Military installations to specifically include: Article 43, The Road Law (Japan) (prohibited acts relative to roads). No person shall commit the following described acts:

5.12.1.1 Damaging the road, causing roads to be littered with debris, polluting the roads with debris or fallout from motor vehicles or otherwise defacing roads unreasonably or without due cause.

5.12.1.2 Article 43-2 (Measures to be taken to prevent cargo or things loaded on motor vehicles from falling out).

5.12.1.3 The agency managing a road may when there is reasonable cause for him to feel that items or cargo being carried in or on a motor vehicle may fall out and damage, pollute, or otherwise deface the road in such manner as to hinder or obstruct the traffic, order the operator of the vehicle in question to take steps or measures necessary to prevent occurrence of such hindrance by stopping operation of the vehicle, or correcting the method of loading or traveling or operation of the vehicle.

5.13 REQUIRED INSURANCE (In addition to that required by Japanese Law)

5.13.1 The contractor shall procure and maintain during the entire period of his performance under this contract the following minimum insurance on each vehicle used by the contractor at the work site.

5.13.2 Type: Automobile Property Damage Insurance Amount: ¥3,000,000 or Dollar equivalent Bodily Injury Insurance Amount: ¥30,000,000 or Dollar equivalent.

5.13.3 All vehicles must be properly inspected/insured in accordance with Japanese Compulsory Insurance (JCI) requirements.

5.13.4 Prior to the commencement of work hereunder, the contractor shall furnish to the CO a certificate or written statement of the above required insurance. The policies evidencing required insurance shall contain an endorsement to the effect that cancellation or any material change in the policies adversely affecting the interests of the U.S. Government in such insurance shall not be effective for such period as may be prescribed by the laws of the state in which this contract is to be performed and in no event less than thirty (30) days after written notice thereof to the CO.

6.0 PERFORMANCE PERIOD

FY18 Basic Year: 1 Oct 17 – 30 Sep 18

FY19 Option Year 1: 1 Oct 18 – 30 Sep 19

FY20 Option Year 2: 1 Oct 19 – 30 Sep 20

7.0 APPENDICES

A. Acronyms and Abbreviations List

B. Maps and Site Plans

C. Government Furnished Property/Services/Equipment (Reserved)

D. Publications/Instructions

E. Sample 18 AMDS/SGPL Chain of Custody Forms

F. JEGS Sampling Schedule (Wastewater)

G. Example OPG Annual Sampling Schedule

APPENDIX A

ACRONYM AND ABBREVIATION LIST

AF Air Force

AFB Air Force Base

18 AMDS/SGPL Theater Preventive Medicine Flight, Analytical Division, Building 853 at Kadena Air Base

CES Civil Engineer Squadron

718 CES/CEIE 718 CES/Civil Engineer Installation Management Flight, Environmental Element

CFR Code of Federal Regulation

CO Contracting Officer

DEPT Department

DOD Department of Defense

FAR Federal Acquisition Regulation

Form 2 18 AMDS/SGPL, Form 2, Request for Lab Services

HW Hazardous Waste

HWAP Hazardous Waste Accumulation Point

JEGS Japan Environmental Governing Standards

KAB Kadena Air Base mL milliliters mg/L milligrams/liter

OPG Okinawa Prefectural Government

OSHA Occupational Safety and Health Act

POC Point of Contact ppm parts per million

PWS Performance-Based Work Statement

QI Quality Inspector

USAF United States Air Force

APPENDIX B

MAPS AND/OR SITE PLANS

Kadena Air Base Gate 1 Annual Sampling Point

Kadena Air Base Gate 4 Annual Sampling Point

Camp Courtney WWTP Monthly Sampling Point

Camp McTureous Annual Sampling Points

Main Gate Points

Okuma WWTP Monthly Sampling Point

Okuma Bio-Reactor Annual Sampling Point

APPENDIX C

GOVERNMENT FURNISHED

PROPERTY/SERVICES/EQUIPMENT

Reserved

APPENDIX D

PUBLICATIONS/INSTRUCTIONS

Publications Date Applicable Chapters

JEGS 2016 Chapter 4, Waste Water Chapter 5, Hazardous Materials Chapter 6, Hazardous Waste Chapter 11, Pesticides Chapter 14, Polychlorinated Biphenyls Chapter 15, Asbestos Chapter 17, Lead-Based Paint Chapter 18, Spill Prevention & Response Chapter 19, Underground Storage Tanks

APPENDIX E

Sample 18 AMDS/SGPL Chain of Custody Forms

APPENDIX F

JEGS AF SAMPLING SCHEDULE

Camp McTureous – Annually: pH, BOD5, TSS, and all parameters listed in Table C4.3.1.3.

Kadena Gate 1 – Annually: pH, BOD5, TSS, and all parameters listed in Tables C4.T4 and C4.3.1.3.

Kadena Gate 4 – Annually: pH, BOD5, TSS, and all parameters listed in Tables C4.T4 and C4.3.1.3.

Camp Courtney DWTP – Monthly: pH, BOD5, TSS

Camp Courtney DWTP – Annually: All parameters listed in Table C4.3.1.3.

Okuma DWTP – Monthly: pH, BOD5, TSS

Okuma DWTP – Annually: All parameters listed in Table C4.3.1.3.

Okuma bio-reactor – Annually: pH, BOD5, and TSS *NOTE: The bio-reactor only requires annual sampling because it is less than <503m/day, (see JEGS para. C4.3.1.5.2).

2016 JEGS, Table C4.3.1.3

Maximum Daily Average Pollutant (mg/L) (mg/L) COD (for direct discharge into sea areas, lakes or marshes) 160 120 Total Coliform 3,000/mL Copper 3 Zinc 2 Iron (Soluble) 10 Manganese (Soluble) 10 Chromium 2 Mineral Oils (N-hexane Extract) 5 Animal/Vegetable Oils & Fats (N-hexane Extract) 30 Phenols 5 Nitrogen 120 60 Phosphorus 16 8

2016 JEGS, Table C4.T4

Pollutant Maximum Allowable Limit (mg/L) Cadmium, and its compounds 0.03 Cyanide 1 Organic phosphorus compounds (parathion, methyl parathion, methyl demeton and EPN only) 1 Lead, and its compounds 0.1 Chromium (VI) 0.5 Arsenic, and its compounds 0.1 Total mercury 0.005 Alkyl mercury compounds ND (Detection limit is 0.0005) PCBs 0.003 Trichloroethylene 0.1 Tetrachloroethylene 0.1 Dichloromethane 0.2 Carbon tetrachloride 0.02 1,2-dichloroethane 0.04 1,1-dichloroethylene 1 cis-1,2-dichloroethylene 0.4 1,1,1-trichloroethane 3 1,1,2-trichloroethane 0.06 1,3-dichloropropene 0.02 Thiuram 0.06 Simazine 0.03 Thiobencarb 0.2 Benzene 0.1 Selenium, and its compounds 0.1 Boron, and its compounds 10 (Non-Coastal Area) / 230 (Coastal Area) Fluorine, and its compounds 8 (Non-Coastal Area) / 15 (Coastal Area) Ammonia, ammonium compounds, nitrate and nitrite compounds

Sum of ammonia,-N X 0.4, nitrate-N and nitrite-N)

1,4-Dioxane 0.5 Dioxins 0.00000001 (10 pg-TEQ/L) Note:

1. If documentation is available that explicitly states that one or more of the above substances are never introduced those substances may be excluded from monitoring requirements.

APPENDIX G

EXAMPLE OPG ANNUAL SAMPLING SCHEDULE