Solicitation Attachment 1 PWS dated 28 May 2009.pdf

Solcitation (FA5270-09-R-0013) Attachment 1

PERFORMANCE-BASED WORK

STATEMENT (PWS)

FOR

Bulk Fuel Delivery On US Military Installations

Okinawa

505TH Quartermaster Battalion

Dated 28 May 09

PERFORMANCE WORK STATEMENT

TABLE OF CONTENTS

SECTION PAGE

1 DESCRIPTION OF SERVICES 3

2 SERVICES SUMMARY 3

3 GOVERNMENT FURNISHED PROPERTY AND SERVICES 4

4 GENERAL INFORMATION 5-11

5 APPENDIX (A-D) 12-19

A-ACRONYMS AND ABBREVIATIONS

B-Delivery List F76 C-Delivery List JP8 D-Delivery List JP5

1. DESCRIPTION OF SERVICES.

The contractor shall provide all management, tools, supplies, equipment, and labor necessary to operate and maintain Bulk Fuel Delivery Services.

1.1. Loading. At the fuel loading point the contractor’s will be inspected for all safety requirements which are outlined using the fuel loading inspection checklist at each terminal.

1.2. Calibration of Vehicle Meters. All vehicles meters will work properly 100% of the time and meters will be calibrated every 6 months.

1.3. Deliveries.

a. Automatic Deliveries. Automatic deliveries are scheduled through the Quality Assurance Personnel (QAP) or his /her representative to ensure the availability of a receiving government representative.

b. On-call Deliveries. Those orders placed by on-call customers to the QAP or his/her designated representative for deliveries other than automatic deliveries. The contractor shall respond by the close of business of the next regular duty day after receiving notification of an on call delivery.

c. Contractor shall maintain ample insurance to fully cover the damages and environmental remediation for fuel/petroleum spills arising from performance under this contract. Contractor shall be fully and solely liable for any damages resulting from such spills. Contractor shall not hold the government liable in any way for damage due to performance under this contract.

1.4. U.S. Air Force Requirements. The individual facility custodian or another appointed person from the respective organizations must be present to verify fuel delivery and sign for each receipt.

2. SERVICES SUMMARY.

The Contractor service delivery requirements are summarized into performance objectives that relate directly to standards of performance required to meet contract requirements. For the Performance Objective to be met, service delivery must be in substantial compliance with applicable performance standards. The Performance Threshold describes the minimum overall levels of service delivery required for acceptable quality control. Failure to meet these Performance Thresholds means that contractor Quality Control is unacceptable.

SERVICE SUMMARY

Performance Objective PWS paragraph Performance Threshold

Calibration of Vehicle Meters.

Meters are calibrated and working properly

1.2 Meter works properly 100% of

the time.

Perform Bulk Fuel Delivery Services Automatic Deliveries

1.3.

1.3.a

Automatic deliveries are performed timely 90% of the time.

Perform Bulk Fuel Delivery Services On-Call Deliveries

1.3.

1.3.b

On Call deliveries are performed timely 90% of the time.

Customer Service ALL No more than (3) valid customer complaint per month. No more than (3) valid customer complaint per month

Environmental: All environmental requirements are met IAW the PWS

4.10 No more than (3) valid customer

complaint per month. No more than (3) valid customer complaint per month

Safety: all safety requirements are met IAW the PWS

4.11 No more than (3) valid customer

complaint per month. No more than (3) valid customer complaint per month

3. GOVERNMENT FURNISHED PROPERTY AND SERVICES.

3.1. Equipment.

3.1.1. The 505th Quartermaster Battalion shall provide, without cost, the facilities, materials and, if required, equipment and/or services listed below:

3.2. Facilities. The 505th Quarter Master Battalion shall provide and make available to the contractor desk space, heat, light, water and telephone service for contractor personnel at various Government installations, as follows:

a. Kuwae #1, Bldg #700

b. White Beach, Bldg #730

c. Chimuwan #3, Bldg #305

3.3. The 505th Quartermaster Battalion shall furnish to the contractor the new quick disconnect half (male side) of the single point receptacles (1560-00-949-2087) permitting the 505th Quartermaster Battalion fuel stand hoses to connect to the contractor’s trucks, and fuel pressure cap (1560-00-516-9029) to keep dust and dirt out of the receptacle when not in use.

3.4. The 505th QM BN shall furnish new self-locking, standard type numbered seals (5340-00-081- 3381). Seals shall be affixed only by Army personnel, and shall be used to seal hatch and gauge stick covers, bottom compartment drains, and the covers to any openings which would permit the removal of petroleum from the tank truck without passing through the meter and dispensing.

3.5. The single point receptacle and dust fittings listed in paragraph 3.3 are on-hand and available from the Property Book Office, 505th Quartermaster Battalion. Replacement Fittings will be provided on an exchange basis when initially provided fittings become unserviceable. The self-locking, standard type numbered seals are on-hand at Kuwae tank farm.

3.6. Be responsible for safeguarding all government property provided for contractor use. Contractor personnel shall be limited to their work area. Access or escorted entry shall be coordinated with the Facility Manager. If the contractor is unable to contact the Facility Manager, call the QAP. The contractor shall promptly repair or replace at his sole expense any U.S. government or private property damaged by any subcontractor, employee or agent.

4. GENERAL INFORMATION.

4.1 QUALITY CONTROL.

The policy of the Government for Contractor Quality Control and applicable definitions are provided in the Federal Acquisition Regulations in Part 46. The Contractor is required to control the quality of service delivery and offer to the Government for acceptance only services which conform to contract requirements. The overall control of quality must meet the specified performance thresholds for each requirement in the Services Summary.

4.1.1. Quality Control Program. The contractor shall provide a complete Quality Control Program (QCP) to ensure the requirements of the contract are provided as specified. The contractor shall provide a QCP describing the inspection system for the requested services listed in the PWS. The contractor shall develop and implement procedures to identify, prevent and ensure non-recurrence of unacceptable services. The contractor shall submit to the Contracting Officer for review.

The contractor shall update the plan as changes occur and changes shall be submitted for review by the Contracting Officer.

4.1.2. The contractor’s QCP shall contain, as a minimum, the following items:

a. A description of the inspection system to cover all services. Description shall include specification as to the areas to be inspected on a scheduled and unscheduled basis, frequency of inspections, and the title and organizational placement of the inspector(s).

b. A description of the methods to be used for identifying and preventing defects in the quality of service performed.

c. A description of how the records will be kept. Records must document all inspections and corrective or preventive actions taken.

4.1.3. Records of inspections shall be kept and made available to the Government throughout the contract performance period and for the period after contract completion until final settlement of any claims under this contract.

4.2 QUALITY ASSURANCE.

The government will periodically evaluate the contractor’s performance by appointing a representative(s) to monitor performance to ensure services are received. The government representative will evaluate the contractor’s performance through intermittent on-site inspections of the contractor's quality control program and receipt of complaints from base personnel. The government may inspect each task as completed or increase the number of quality control inspections if deemed appropriate because of repeated failures discovered during quality control inspections or because of repeated customer complaints. Likewise, the government may decrease the number of quality control inspections if merited by performance. The government will also investigate complaints received from various customers located on the installation. The contractor shall be responsible for initially validating customer complaints. However, the government representative shall make final determination of the validity of customer complaint(s) in cases of disagreement with customer(s).

4.2.1 The Quality Assurance Personnel (QAP) is the authorized government representative(s) who will perform assessments of the contractor’s performance. Subsequent to contract award, the identity of the QAP(s), with a letter defining their duties and authority will be promptly furnished to the successful bidder/offeror.

4.2.2 The QAP(s) or alternate(s) will inform the contract manager in person when discrepancies occur and will request corrective action. The QAP(s) or alternate(s) will make a notation of the discrepancy on their surveillance checklist with the date and time the discrepancy was noted and will request the contract manager (or authorized representative) to initial the entry on the checklist.

4.2.3 Any matter concerning a change to the scope, prices, terms or conditions of this contract shall be referred to the Contracting Officer and not to the QAP(s).

4.2.4. The services to be performed by the contractor during the period of this contract shall at all times and places are subject to review by the Contracting Officer or authorized representative(s).

4.3. SECURITY REQUIREMENTS.

Security and base access requirements are contained in clause 5352.242-9000 “Contractor Access to Air Force Installations.” Contractor employees will be required to obtain and display identification badges.

Anticipate delays in getting commercial vehicles on base and allow time for commercial vehicles to reach their destination by driving designated routes at posted speed limits throughout the base. Procedures for commercial vehicle access to the base are subject to change without prior notice.

4.3.1. ID Passes, Badges and Vehicle Stickers: The contractor is responsible to obtain such clearances and/or passes as required for his/her employees to enter military installations on Okinawa prior to work.

The contractor shall be responsible for all passes issued to his/her employees under this contract.

Applications shall be coordinated through the Contracting Officer or designated representative. At the time of application, Security Forces may conduct a background check on employees. Upon termination of employment, the contractor shall be responsible for returning identification cards and base passes to Security Forces within 24 hours.

4.4 PHYSICAL SECURITY.

The contractor shall be responsible for safeguarding all government property provided for contractor use.

At the close of each work period, government facilities, property, and materials shall be secured.

4.4.1. Key Control. The contractor shall establish and implement methods of ensuring that all keys/key cards issued to the contractor by the government are not lost or misplaced and are not used by unauthorized persons.

4.4.2. The contractor shall immediately report the occurrences of the loss of duplicate keys to the contracting officer.

4.4.3. In the event keys, other than master keys, are lost or duplicated, the contractor shall, upon written direction of the contracting officer, re-key or replace the affected lock or locks; however, the government, at its option, may replace the affected lock or locks or perform re-keying. When the replacement of locks or re-keying is performed by the government, the total cost of re-keying or the replacement of the lock or locks shall be deducted from the monthly payment due the contractor. In the event a master key is lost or duplicated, all locks and keys for that system shall be replaced by the government and the total cost deducted from the monthly payment due the contractor.

4.4.4. The contractor shall prohibit the use of keys issued by the government by any persons other than the contractor’s employees. The contractor shall prohibit the opening of locked areas by contractor employees to permit entrance of persons other than contractor’s employees engaged in the performance of assigned work in those areas, or personnel authorized entrance by the Contracting Officer.

4.5.4. Lock Combinations The contractor shall establish and implement methods of ensuring that all lock combinations are not revealed to unauthorized persons. The contractor shall ensure that all lock combinations are changed when personnel having access to the combinations no longer have a need to know such combinations. These procedures shall be included in the contractor’s Quality Control Plan.

4.6. HOURS OF OPERATION.

4.6.1 Delivery Hours. Normal delivery hours are 0730-1630 daily, Monday through Friday, except for US legal holidays. In the event deliveries cannot be completed during normal delivery hours, deliveries may be completed after normal delivery hours and on Saturdays. The contractor will contact QAP to make arrangements for deliveries after normal duty hours.

4.6.2. Recognized Holidays. The contractor is not required to provide service on the following days:

* 1 January New Year’s Day 3d Monday of January Martin Luther King’s Birthday 3d Monday of February President’s Day Last Monday of May Memorial Day

* 4 July Independence Day 1st Monday of September Labor Day 2d Monday of October Columbus Day

* 11 November Veterans’ Day 4th Thursday of November Thanksgiving Day *5 December Christmas Day

* If these holidays fall on a Saturday, the preceding Friday will be observed, and if these holidays fall on a Sunday, the following Monday will be observed, unless otherwise notified with at least one (1) week advance notice. If a holiday falls on a regular workday, the services shall be rescheduled in the same week to either the day preceding or following the holiday.

4.6.3. Emergency Services. On occasion, services may be required to support an activation or exercise of contingency plans outside the normal duty hours described above.

4.7. OPERATION DURING TYPHOON CONDITIONS. When Tropical Cyclone Condition Readiness 2 (TCCOR 2) is declared, all work will cease immediately. The Contractor will clean up and dispose of all loose debris and waste as directed by QAP to secure the job site against damage that may result from anticipated weather conditions. Contractor responsibility shall remain the same during tropical cyclone declaration “Tropical Cyclone Condition of Readiness 1 Caution (TCCOR1C).” Upon the declaration of TCCOR1C, the contractor employees shall be excused from all duties. Upon declaration “Tropical Cyclone Condition of Readiness 1 Recovery (TCCOR1R),” the contractor will immediately be available for duty.

4.8. CONSERVATION OF UTILITIES.

The contractor shall instruct employees in utilities conservation practices. The contractor shall be responsible for operating under conditions which prevent the waste of utilities which include the following:

4.8.1. Lights shall be used only in areas where and when work is actually being performed.

4.8.2 Mechanical equipment controls for heating, ventilation, and air conditioning systems shall not be adjusted by the contractor or by contractor employees unless authorized.

4.8.3. Water faucets or valves shall be turned off after the required use has been accomplished.

4.8.4. Government telephones shall be used only for official government business.

4.9. RECORDS.

The contractor shall be responsible for creating, maintaining, and disposing of only those government required records that are specifically cited in this PWS or required by the provisions of a mandatory directive listed in Applicable Publications and Forms. If requested by the Government, the contractor shall provide the original record or a reproducible copy of any such record within five working days of receipt of the request.

4.10 ENVIRONMENTAL CONTROLS.

4.10.1. Compliance with Laws and Regulations. The contractor shall be knowledgeable of and comply with all applicable Japan Environmental Governing Standards (JEGS), Interstate, Federal, State, and Local laws, regulations, and requirements regarding environmental protection. In the event environmental laws/regulations change during the term of this contract, the contractor is required to comply as such laws come into effect. If there is an increase or decrease in cost as a result of the change, the contractor shall inform the Contracting Officer pursuant to notice requirements and negotiate a modification to the contract.

4.10.2. Notification of Environmental Spills. If the contractor spills or releases any fuel being carried in the contractor’s vehicles or any substance contained in 40 CFR 302 into the environment, the contractor or its agent shall immediately report the incident to the Fire Department at the delivery location (911).

The liability for the spill or release of such substances rests solely with the contractor and its agent.

4.10.3. Material Storage and Use. The contractor shall follow manufacturer’s guidelines and professional recommendations for control of humidity, temperature, cleanliness, and materials handling.

This includes hazardous materials.

4.10.4. The contractor shall carry spill kits/materials on all vehicles suitable for the material being carried.

4.11 SAFETY REQUIREMENTS.

In performing work under this contract the contractor shall:

4.11.1 Conform to the safety requirements contained in the contract for all activities related to the accomplishment of the work.

4.11.2. Perform work in a safe manner as required by OSHA 2206, General Industry, Occupational Safety and Health Standards (29 CFR 1910) and Japan Environmental Governing Standards (JEGS) by US Force Japan.

4.11.3. Develop and provide at the start of the orientation period or the start of the first operational performance period (if there is no orientation period) a safety plan for the protection of government facilities and property and to provide a safe work environment for contractor personnel.

4.11.4. Provide protection to government property to prevent damage during the period of time the property is under the control or in possession of the contractor.

4.11.5. Include a clause in all subcontracts to require subcontractors to comply with the safety provisions of this contract as applicable.

4.11.6. Record and report promptly (within one hour) to the contracting officer or designated government representative (GR), all available facts relating to each instance of damage to government property or injury to either contractor or government personnel.

4.11.7. In the event of an accident/mishap, take reasonable and prudent action to establish control of the accident/mishap scene, prevent further damage to persons or property, and preserve evidence until released by the accident/mishap investigative authority through the contracting officer.

4.11.8. If the government elects to conduct an investigation of the accident/mishap, the contractor shall cooperate fully and assist government personnel in the conduct of investigation until the investigation is completed.

4.11.9. Include a clause in each applicable subcontract requiring the subcontractor's cooperation and assistance in accident reporting and investigation.

4.12. PHASE OUT.

4.12.1 If there is a change in contractor or if the operation reverts to in-house, the incumbent contractor will provide familiarization, to the government or the follow-on contractor, whichever the case may be.

During the phase-out familiarization period, the incumbent will be fully responsible for the operation 30 days before the contract expires.

4.12.3 The government reserves the right to conduct site visits in all contractor operated facilities in conjunction with the solicitation of offers for the follow-on contract. In the event the follow-on contract is awarded to other than the incumbent, the incumbent contractor will cooperate to the extent required to permit an orderly change over to the successful contractor. With regard to the successor contractor’s access to incumbent employees, a recruitment notice may be placed in each facility.

4.13 PUBLICATIONS.

4.13.1 Compliance with all publications, regulations and operating instructions provided by the Government is required when:

4.13.2 They pertain to the procedures for materials expediting herein and where the contractor is authorized by the statement of work to accomplish the work specified in the publication, regulation or operating instructions.

4.13.3 The publications prescribe USAF policies, use of materials, procedures and processes applicable to the work requirements.

4.13.4 The contractor is required to acquire and work on the latest version of the publication.

4.14. CONTRACTOR PERSONNEL

4.14.1. Contract Manager: The contractor shall provide a contract manager and alternate contract manager (responsible in the absence of the contract manager) who shall be responsible for the performance of the services. The names of the contract manager and alternate(s) shall be provided to the

CO in writing prior to the beginning of the first performance period. The contract manager and alternate(s) must be able to read, write, speak, and understand English.

4.14.1.1. The contract manager and alternate shall have full authority to act for the contractor on all contract matters relating to daily operations of this contract.

4.14.1.2 The contract manager or alternate shall be available during normal duty hours within two (2) hours to meet on the installation with government personnel (designated by the CO) to discuss problems.

After normal duty hours the manager or alternate shall be available within four (4) hours.

4.14.2. Contractor Employees: The contractor shall not employ persons for work on this contract if such employee is identified to the contractor by the CO as a potential threat to the health, safety, security, general well being or operational mission of the installation and its population.

4.14.2.1. Contractor personnel shall present a neat appearance and be easily recognized as contractor employees. This may be accomplished by wearing distinctive clothing bearing the name of the company or by wearing appropriate badges, which contain the company name and employee name in English.

4.14.2.2. The contractor shall not employ any person who is an employee of the U.S. Government if employing that person would create a conflict of interest. Additionally, the contractor shall not employ any person who is an employee of the Department of the Air Force, either military or civilian, unless such person seeks and receives approval according to DOD 5500-7-R Joint Ethics Regulation. The contractor shall not employ any person who is an employee of the Department of the Air Force if such employment would be contrary to the policies in AFI 64-106.

4.14.2.3. The contractor is cautioned that off-duty active military personnel hired under this contract may be subject to permanent change of station, change in duty hours or deployment. Military Reservists and National Guard members may be subject to recall to active duty. The abrupt absence of these personnel could adversely affect the contractor’s ability to perform; however, their absence at any time shall not constitute an excuse for nonperformance under this contract.

4.15. JAPANESE ROAD LAWS

4.15.1. The contractor shall comply with Japanese Road Laws while on US Military installations to specifically include: Article 43 The Road Law (Japan) (prohibited acts relative to roads). No person shall commit the following described acts:

4.15.1.1. Damaging the road, causing roads to be littered with debris, polluting the roads with debris or fallout from motor vehicles or otherwise defacing roads unreasonably or without due cause.

4.15.1.2. Article 43-2 (Measures to be taken to prevent cargo or things loaded on motor vehicles from falling out)

4.15.2. The agency managing a road may when there is reasonable cause for him to feel that items or cargo being carried in or on a motor vehicle may fall out and damage, pollute, or otherwise deface the road in such manner as to hinder or obstruct the traffic, order the operator of the vehicle in question to take steps or measures necessary to prevent occurrence of such hindrance by stopping operation of the vehicle, or correcting the method of loading or traveling or operation of the vehicle.

4.16. REQUIRED INSURANCE BY JAPANESE LAW

4.16.1. The Contractor shall procure and maintain during the entire period of his performance under this contract the following minimum insurance on each vehicle used by the Contractor at the work site.

4.16.1.1. Type: Automobile Property Damage Insurance Amount: ¥3,000,000 or Dollar equivalent, Bodily Injury Insurance, Amount: ¥30,000,000 or Dollar equivalent

4.16.1.2. All vehicles must be properly inspected/insured in accordance with Japanese Compulsory Insurance (JCI) requirements.

4.16.2. Prior to the commencement of work hereunder, the Contractor shall furnish to the Contracting Officer a certificate or written statement of the above required insurance. The policies evidencing required insurance shall contain an endorsement to the effect that cancellation or any material change in the policies adversely affecting the interests of the U.S. Government in such insurance shall not be effective for such period as may be prescribed by the laws of the state in which this contract is to be performed and in no event less than thirty (30) days after written notice thereof to the Contracting Officer.

4.17 MEDICAL.

4.17.1 Health care and medical evacuations or emergencies rest solely with the contractor and its agent.

4.18 SUBMISSION OF INVOICES.

The contractor’s invoice shall indicate the following:

a. Contractor’s name, address, phone number, fax number and e-mail address

b. Contract/Purchase or Delivery Order Number/Contract Line Item Number

c. Billing period or date supplies/services were received or rendered

d. Adequate description of supplies/services

f. Quantities of supplies/services received or performed

g. Total amount

h. Printed name, title, organization, and telephone number of designated government official.

Invoices (one original) shall be submitted to the QAP at Chibana Compound for certification not later than the first working day of the month immediately succeeding the billing month. Delays in the submission of invoices will cause eventual delays in payments.

4.18.1 Payments. Payment will be made in yen to the contractor upon submission of proper invoices. The requiring activity’s representative (the QAP), who certifies invoices, shall submit them to the following paying office :

Defense Finance and Accounting Service (DFAS) Japan DFAS-Army (DFAS-JRLF) Unit 5220

APO AP 96328-5220

E-mail: DFAS-JP-VPISA@dfas.mil

4.19. CONTINUATION OF ESSENTIAL DOD CONTRACTOR SERVICES DURING

CRISIS IAW AFI 62-124 para 2.7.1 DoDI 3020.37 This requirement is considered mission essential and contractor shall provide Bulk Fuel Service during crisis.

5.0 APPENDIX

ACRONYMS AND ABBREVIATIONS LIST

APPENDIX A

Acronym/Abbreviation Definition

AF Air Force

AFB Air Force Base

CFR Code Federal Regulation

CO Contracting Officer

DEPT Department

DOD Department of Defense

FAR Federal Acquisition Regulation

GR Government Representative

OSHA Occupational Safety and Health Act

PBSA Performance Based Service Acquisition

PWS Performance-Based Work Statement

QA Quality Assurance

QAP Quality Assurance Personnel

QCP Quality Control Program

SS Services Summary

USAF United States Air Force

APPENDIX B (F76)

TO

PWS FOR BULK FUEL DELIVERY ON US MILITARY INSTALLATIONS

505th Quartermaster Battalion

BUILDING/TANK NUMBER

F76

AWASE HANSEN

4510 2106 S4500 2123

1600 GEN 2327

CHIBANA 2346

53115 2365A 54150 2386A 84-1186 2397 46101 2415 Camp Courtney 2442 4119B 2443 4131A 2445 4211B 2448 4214A 2451 4218B 2471 4229B 2490 4231C 2495 4300A 2504 4334A 2505 4344A 2518 4405B 2530 4409A 2537 4417E 2539 4419A 2617 4433A 2618 4438A 2622 4440D 2635 4441B 2654 4446A 2655 4449A 2665 4450A 2667B 4451A 2705 4456E 2725 4468A 2820 4349 2825 4213B 2867 4210C 2893 4399A 1307B 4355 2201A

F76 (CONT) F76(CONT)

FOSTER HANSEN(CONT)

9 2415GEN

104 2418B 215 2446A 370 2457D 444 2519E 449 2610C 460 2327 499 2860 547 2153C 1400 2828B 5675 2858C 5806 2407C 11B 2419D 1432A 2888A 14B 2493 1620B 2399 200A 2942B 217B 2942C 220/222 2942A 22G 2395I 359-1 2484C 359-H 2494B 4100A

4125A KINSER

4136D 115 4137B 330 4138B 425B 4236D 517 447C 613 459B 1073 470D 1041E 472B 104C 473B 1072A 478B 1091A 480B 1092A 481B 110D 484B 114E 488B 115B 488C 1202A 496C 1210B 5618C 1217B 5624B 1223F 5670A 1223C 5696B 1224E 5698B 1225B 5700B 1226B 5703B 1227A 5704B 1233A 5717B 1305C 90B 1399C 92A 1460E

F76(CONT) F76(CONT)

FOSTER (CONT) KINSER (CONT)

488G 1460C 488F 1463A 480D 1471B 459D 202B

5718B 21TH

200C 301C 90D 330C 5643A 1307B 5838B 415A 5868A 425T 4A 520B 346C 602E 320D 616C

363OT 831B

4251A 864B 1387 866C 950A

LESTER 1052C

6010B 618 6198 616H

6017B OTHERS

6021B CHIM WAN 111

6038C CHIM WAN 302

6040C Hanza 101D

6041B IE SHIMA 42

6043C NTA500A‐503

6071C NTA510

6041 Tengan 308 Tengan LCM8556 MCTUREOUS Tengan LCM8583 5000 Bolo Point 1000A 5104A Kuwae 815 5075 Kuwae 710 5001A USNS Safeguard 5010B Chim Wan 201 5203B iE SHIMA 50D

USS GUARDIAN

MCAS Awase Comm Site B‐102

201A USS PATRIOT

217 NTA517

220 CTA2942B

303 CTA2942C

402 Chim Wan 114 417 Chim Wan 206

423 MWR

Chim Wan 303

F76 (CONT) F76 (CONT)

MCAS (CONT) SHIELD

442 758 637 852 671 1065 101 1066 110B 2009 159B 6105 218B 6300 223B 6306 225/226B 7009 229B 7149 261A 7150 400B 7160 415B 7205 423A 7207 433A 7216 460B461A 8201 510A 8210 515A 8236A 517A 7144A 525C 7144B 526E 6500 533D

539B TORII

546B 101 562E 105A 633D 127 646A 200 656A 201 676B 214 679A 217 739A 235 218D 266 415E 275 226B 400 525H 733 405A 228B 518A 160 672 213 533H 251 546E 265 460E 292

F76 (CONT) F76 (CONT)

WHITE BEACH SCHWAB

735 2307 1002 3207 1106 3315A 1110 3430 1116 3434D 1122 3541A 1148 3619B 1411 3625B 1500 3658A 1502 3660A 1537 3663D 1551 3667D 1554 1024A 1700 3232A 9941 3238A 9942 3330A 1065B 3332A

728‐GEN 3407B

LCM‐8556 500A/503

LCM‐8583 3409A

MR120‐8805 3416A

1100 3423C 733 3425A 3435A 3450B 3510B 3510D 3535A 3630A 3269D 3540B 3424D

APPENDIX C

PWS FOR BULK FUEL DELIVERY ON US MILITARY INSTALLATIONS

BUILDING/TANK NUMBER

JP8

CAMP COURTNEY CAMP FOSTER

4107 5828

CAMP HANSEN CAMP KINSER

2171 308

MCAS CAMP SHIELDS

630 8236A

CAMP SCHWAB

3254A 3254B

APPENDIX D (JP5)

PWS FOR BULK FUEL DELIVERY ON US MILITARY INSTALLATIONS

BUILDING/TANK NUMBER

JP5

CAMP HANSEN

2498A 2498B

JP5 BUNKERS TO USN VESSELS