Attachment 1 - Salient Characteristics 36 MXS Stratasys F900 Printer.pdf
PDF 136 KB Posted
- Attached to
- Sources Sought 36 MXS - Stratasys F900 Printer
- Solicitation number
- FA524025QM172
About this file
This document is a Requirement Description with Salient Characteristics from the Department of the Air Force, Headquarters 36th Wing (PACAF) at Andersen Air Force Base in Guam. The document specifies a procurement requirement for one (1) Stratasys F900 Polymer 3D Printer with specific technical requirements and capabilities.
The printer must be capable of printing with multiple materials including ABS-M30, ABS-ESD7, PC-ABS, PC, PPSF, ULTEM 9085, PC-ISO, and several other polymer types. Additional technical specifications include a 220/240v voltage requirement, an emergency stop system, and a minimum table size of 850 x 580 x 850 mm. The contractor is also required to provide on-site set-up, calibration, and training with the equipment. The requirement is for a single unit to be delivered to the 36th Wing at Andersen Air Force Base in Guam.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sources Sought 36 MXS - Stratasys F900 Printer.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
HEADQUARTERS 36TH WING (PACAF)
ANDERSEN AIR FORCE BASE GUAM
REQUIREMENT DESCRIPTION WITH SALIENT CHARATERISTICS
QTY 1: Stratasys F900 Polymer 3D Printer
- Capable of printing materials: ABS-M30, ABS-ESD7, PC-ABS, PC, PPSF, ULTEM 9085, PC-ISO, ABS-M#)I, Nylon 12, Nylon 12CF, ULTEM 1010, ST130, Nylon 6, ANTERO 900NA, ASA
- Voltage Requirement of 220/240v
- Emergency Stop System
- Minimum table size of at least 850 x 580 x 850 mm
Contractor must also provide on-site set-up, calibration, and training.
File details come from the government source that posted it. Updated .