Attachment_Salient_Char.docx

Date: 29 August 2018 Specifications Survey Equipment Salient Characteristics Andersen AFB, Guam Scope: To acquire GNSS capable devices for 3E5X1 deployment kits to fulfill deployment equipment/capabilities requirements. We require three (3) GNSS GPS Rovers, one (1) Handheld Survey Data Controller, and one (1) GNSS Handheld device and one (1) GNSS Grade Control System for a John Deere motorgrader, and one (1) Grade Control System for a Volvo asphalt paver.. The devicse must be highly mobile and versatile. Survey equipment should be able to operate in a deployment/contingency environment with limited satellite coverage, minimal maintenance/troubleshooting, and able to operate with survey quality accuracy independent of base station support. In addition the devices must be interoperable with planning/geospatial data software currently in use by the career field (specified below), and with minimal equipment to transport/carry.

Schedule of work: Delivery of required equipment shall be accomplished within 30 calendar days from date of contract award.

INSPECTION AND ACCEPTANCE: An appropriate representative from 36th Civil Engineer Squadron and the 554 RED HORSE Squadron will accomplish inspection and acceptance of delivered equipment.

GNSS GPS Rover Requirements Shall be:

1. Compatible with existing Trimble Business Center/TBC data formats to meet post processing and archival data utilization requirements. Rover should also meet Air Force network security requirements.

2. Automatic pole tilt compensation firmware to correct for user error – 10 degrees or greater.

3. Centimeter accuracy in data collection, even if loss of connection to base station is experienced.

4. GPS(L1/L2/L5), GLONASS(L1/L2/L3), BieDou(B1/B2/B3), GALILEO(E1/E5A/E5B), and SBAS satellite signal tracking with RTK rapid static, RTK kinematic, and on-the-fly initialization. Must be capable of tracking military satellites via encrypted communication/frequencies.

5. 410-470 MHz wide band frequency, Bluetooth enabled, Wi-Fi enabled, cellular service capable. Meet or exceed 10 km radio transmission/receiving range.

6. RTK level positioning performance independent of a base station connection (horizontal accuracy: 4cm/vertical accuracy: 9cm).

7. Certified through FCC, CE, C-Tick, A-Tick, PTCRB, WFA, Anatel.

8. Configurable through web interface, handheld controller, PC softwareWeb interface, Handheld Controller, and PC software.

9. Support for simultaneous links, and Bluetooth communication with handheld survey controller.

10. Water, sand, and dust proof meeting or exceeding IP67 requirements.

11. Shock (drop) resistance meeting or exceeding MIL-STD-810G, Method 516.6, Procedure IV (Survive 2m/6.6FT drop onto concrete. Operate to 40G, 10 msec)

12. Vibration resistance meeting or exceeding MIL-STD-810F, FIG.514.5C-1MIL-STD-810F, Method 514.6, Procedures I, II.

13. Humidity resistance @ 100%, condensing.

Handheld Survey Data Controller Requirements Shall be/have:

1. Compatible with Trimble Business Center/TBC data formats to meet post processing and archival data utilization requirements. Controller shall also meet Air Force network security requirements.

2. Bluetooth enabled, able to connect to GNSS GPS rover, optical total station, and computer via data wire.

3. Able to automatically geotag captured images during surveys.

4. Integrated GPS with internal compass and ability to project direction cues, as well as navigational capabilities for asset/control point location.

5. Qwerty keyboard.

6. Wireless internet connectivity with integrated GSM/GPRS modem.

7. Real-Time synchronization capabilities for in field use, and remote data download capabilities.

8. Integrated camera to perform geotagging of images.

9. Compatibility with existing Trimble S5 total station for optical survey operation.

10. Water, sand, and dust proof meeting or exceeding IP6x (sand/dust), IPx7 (water), and IEC529 requirements.

11. Drop/shock resistance meeting or exceeding MIL-STD-810G, Method 516.6, Procedure IV.

12. Vibration resistance meeting or exceeding MIL-STD-810F, FIG.514.5C-1MIL-STD-810F, Method 514.6, Procedures I, II.

13. Humidity resistance meeting or exceeding MIL-STD-810G, Method 507.5 (90%RH temp cycle (-4F/140F)).

GNSS GPS Handheld Characteristics Shall be/have:

1. Compatible with existing Trimble Business Center/TBC data formats to meet post processing and archival data utilization requirements. Controller shall meet Air Force network security requirements.

2. Able to feature code survey points, with COGO routines for point/feature calculating.

3. Graphically stake points, lines, arcs, and alignments from active maps. (Stakeout Feature)

4. Able to be mounted on a survey rod.

5. Transflective LED-backlit LCD screen, 480p resolution or greater.

6. GPS(L1C/A, L2C, L2E), GLONASS(L1C/A, L1P, L2C/A, L2P), BieDou(B1/B2/B3), GALILEO(E1/E5A/E5B), and SBAS satellite signal tracking with RTK rapid static, RTK kinematic, and on-the-fly initialization. Must be capable of tracking military satellites via encrypted communication/frequencies.

7. Capable of performing topographic surveys, staking, control, etc.

8. Detachable rangefinder hardware for shooting distant survey locations/objects of interest with automatic data collection of measurements. (Objective)

9. Integrated survey capabilities - optical, scanning, and GNSS data, and imaging within same job file.

10. Real-Time synchronization capabilities for in field use, and remote data download capabilities.

11. 410-470 MHz wide band frequency, Bluetooth enabled, Wi-Fi enabled, cellular service capable, secure synchronization of field and office files.

12. Integrated autofocus camera, able to perform geotagging of images.

13. Water, sand, and dust proof meeting or exceeding IP6x (sand/dust), IPx7 (water), and IEC529 requirements.

14. Drop/shock resistance meeting or exceeding 1.2m/4ft drop on plywood over concrete.

a. Vibration resistance meeting or exceeding MIL-STD-810F, FIG.514.5C-1MIL-STD-810F, FIG.514.5C-1.

15. Humidity resistance meeting or exceeding MIL-STD-810G, Method 507.5 (95% non-condensing).

WARRANTY: The Contractor shall provide manufacturer’s standard warranty and for hardware, software, and firmware.

Machine (John Deere 670G Volvo PF7170) Mounted Hardware Requirements:

1. Control Box shall be provisioned with reverse voltage and dump load protection.

2. Control Box shall be provisioned with internal back-up power providing data integrity in the event of external power loss.

3. The installation kit for GNSS 3D and 2D Grade Control System(s) shall include all the mounts, brackets, cables, valves, fixtures, hardware, hoses, nuts/bolts/ties

4. Control Box and necessary mounts/hardware/cradle shall be Fully Sealed to 3 PSI / IP68.

Machine (John Deere 670G Volvo PF7170) Mounted Software Requirements:

Software Package consists of the following machine modules

1. 3D Indicate Control – Generic Machine

2. 3D Indicate Control -- Soil Compactor

3. 3D Automatic Control --Trimmer

4. 3D Indicate Control --Hydraulic Excavator

5. 3D Automatic Control --Motorgrader

6. 3D Automatic Control --Dozer Group

a. 3D Automatic Control --Track Type Tractors (Dozers)

b. 3D Automatic Control --Rubber Tire Dozer

7. 3D Automatic Control --Scraper Group

a. 3D Indicate Only Control --Carry All Scraper

b. 3D Automatic Control -- Tractor Pulled Scraper

c. 3D Indicate Only -- Wheel Tractor Scraper

8. 3D Indicate Only --Wheel Type Loader