Exhibit_B_-_Furniture_Specs.pdf

Exhibit B – Furniture Specifications

Item Description Figure

72" x 72" L‐Shaped Work Stations w/Overhead Bins

• Panel and Frame System

• Tackable Acoustical Performance Panels

• 2x Under Desk Storage Cabinets to be used in a

Freestanding Application (not to support workstation)

• Overhead bin wall height approximately65”

• Non‐overhead bins wall height approximately 50”

• Desk Height approximately 31”

62" x 68" L‐Shaped Work Stations w/Overhead Bin

• Panel and Frame System

• Tackable Acoustical Performance Panels

• 1x Under Desk Storage Cabinet to be used in a

Freestanding Application (not to support workstation)

• Overhead bin wall height approximately65”

• Non‐overhead bins wall height approximately 50”

24" X 48" Work Stations w/Storage Cabinet

• Panel and Frame System

• Tackable Acoustical Performance Panels

• Under Desk Storage Cabinets to be used in a

Freestanding Application (not to support workstation)

• Wall height approximately 50”

144"w X 48"d Wood Laminate Conference Table, Square Table Ends, w/Wire Management, Built‐In Flip‐Top Port for Data & Power Outlets

• Scratch, Spill, and Stain Resistant Laminate for

Heavy Use

• Flip‐Top Port w/Four Power Outlets and Two

Data Ports

• Squared Ends

Mid Back Task Work Chair

• Mesh Back

• Seat Height Adjustment

• Back Height Adjustment

• 360 Degree Swivel

• Tilt

• Tilt Tension

• Tilt Lock

• Height & Width Adjustment Arms

• Rated for 300 lbs

Stacking Guest Chair

• Rated for 300lbs

• Arm Rests but be lower than the bottom of thedesk height of the supplied furniture

ADDITIONAL SPECIFICATIONS

• The cubicles/furniture shall be equal or better in quality than the provided samples in this Exhibit.

• All cubicles/furniture shall be neutral or earth tone in color (i.e. brown, tan, grey, navy, dark green, etc), but whichever color is provided, the color shall be consistent throughout all furniture selections.

• All cubicles/furniture shall also be National Fire Protection Association (NFPA) compliant.

• Contractor is required to break down existing cubicles and move them to a prepositioned vehicle.

Existing furniture includes 16 cubicles. Exhibit D has pictures of existing cubicles.

Furniture dimensions are flexible and do not need to be exactly the same as the dimensions given in the specifications. If a product you have is close in dimensions to what we are requesting then it will be acceptable as long as it fits the dimension of the room.

Provide all characteristics information (picture, material, size, color, etc.) and layout with your quotes.

Installation:

• The contractor shall coordinate with the end user for installation schedule.

• The contractor shall position all furniture in the proper room in accordance with layout.

• The contractor shall unpack, assemble and clean all work areas after installation of materials.

• The contractor is responsible to dispose all trash includes packing materials (cardboard items, regular trash and wood pallets) to off-base in accordance with the laws of Japan.

• The installation shall be completed within one (1) months of receipt of all items at final destination.