Atch_1_(Spec).pdf

RFQ No. FA5209-18-Q-0088 Attachment 1

1. PRODUCT REQUIREMENT (Minimum)

Manufacture/Model: Inamoto Seisakujo Co.,Ltd / Washex T-200FLA-P2 or Equal

Motor: Inverter Drive

Loading Capacity: 80 - 90 kg (200 LB)

Loading Type: Front Loading

Cylinder Material: SUS 304 or better

Cylinder Pocket: 2 pockets (Minimum)

Cylinder Pocket Material: SUS 304 or better

Voltage Frequency: 3 Phase, 200V, 50/60Hz

Utility: Steam: 0.7Mpa (Max) / Air: 0.7~0.9Mpa (Max)

Machine Installation Parameter: Width: 2,200mm (Max) / Length: 1,700 (Max) / Height: 2,300 (Max)

Weight: 4,000kg (Max)

Course Log: Able to program 16 kinds (minimum) by Touch Panel

Language: Operational instructions on the touch panel screen must be in Japanese

Capable to Wash: (1) Blankets, Comforter Cover, Mattress, Bed Skirt, Pillowcases ,Flat/Fitted Sheet, Towels (Bath, Mat, Hand,Wash cloth), Bathrobe

(2) Shirt, Polo Shirts, Pants, Tablecloths, Napkins, Cook Coat/Pants, Apron, Cook Cap, Sleeping bag, Mosquito net ,Athletic clothing

(3) Medical Laundry: Scrub(Coat/Pants/Coat), White Coat, Gown (Patient), Maternity wear, Crib bedding, Partition curtain. Sheet, Towel, Muslin cloth for surgery.

**Medical Laundry must be washed at no less than 71 degrees Celsius and no more than 74 degrees Celsius (160 to 168 degree Fahrenheit) for at least 25 minutes.

Minimum Requirements: (1) The washing machine must be able to be connected to the existing automatic liquid detergent feeder. Existent feeder: GENBU's Dispenser (Model No. B-2600)

(2) The washing machine and the automatic detergent feeder must be linked via signal.

The signals must be a minimum of 6 intervals for feeding detergent into the washing

(3) The machine must have at least one (1) manual detergent slot.

(4) The machine needs to be connected with Steam, Cold Water and Hot Water.

(5) The machine needs to have the hot water valve.

(6) Repair parts and technical support for maintenance should be readily available.

SPECIFICATIONS

WASHING MACHINE FOR LAUNDRY PLANT

RFQ No. FA5209-18-Q-0088 Attachment 1

2. DELIVERY, INSTALLATION AND OTHER RELATED REQUIRMENTS

The contractor shall:

1. Deliver new washing machine to Bldg 154-4, Laundry Plant, Sagami General Depot

(600 Kamiyabe, Chuo-ku, Sagamihara-shi, Kanagawa-ken, Japan 252-0201)

3. Remove existing 200 LB washing machine and move to the designated location outside the Plant (see Attachment 2)

4. Perform necessary piping connection work

5. Perform necessary power connection work

6. Provide trial run and adjustment / On-site training for operation

7. Provide 1-year Warranty

2. Install new washing machine at: See Attachment 2 (Laundry Plant Map)