FA5209-13-T-0087_Specs.pdf

ATTACHMENT 1 Specifications RFQ # FA5209-13-T-0087

Compatibility Requirements: The machine must be able to connected to the existing liquid detergent dispensers.

- (Existent Dispenser: GENBU's Dispenser-Model: B-2600)

The washing machine and dispenser must be linked via signal.

200 Lb Washing Machine - Front-loading

Mfr: Inamoto Manufacturing Co., Ltd.

Model: Washex 200FLA-P2 OR EQUAL

< Minimum Requirements of the Washing Machine>

Motor: Inverter Drive

Load Capacity (JIMS): 90kg (83kg) or more

Cylinder Material: SUS 304 or better

Cylinder Pocket: 2 pockets (Minimum)

Cylinder Pocket Material: SUS 304 or better

Voltage Frequency: 3 Phase, 200V, 50/60Hz

Utility: Steam: 0.7Mpa (Max) / Air: 0.7~0.9Mpa (Max)

Machine Installation Parameter: Width: 2,200mm (Max) / Weight: 4,000kg (Max)

Course Log: 16CH for Touch Panel (Minimum)

Language: Operation instructions on machine must be in Japanese

Capable to Wash: Blankets, Cloth (wash), Covers (Mattress), Pillowcases , Sheet (bed), Sheet (fitted), Tablecloths, Towel, Bathrobe Adult, Robe, Bed Skirt, Coat (pajama), Coat (operating), Dress hospital (white), Gown (operating), Pants (pajama), Shirt, Pants, Mother wear

ATTACHMENT 1 Specifications RFQ # FA5209-13-T-0087

- The dispensing signals must be a minimum of 6 intervals for dispensing of detergent into the washing machine.

Necessary to have the hot water valve.

Necessary to connect with steam, cold water and hot water.

< Incidental Requirements >

The washing machine must be bolted in place.

The drain discharge piping of the washing machine must be fitted to the existing drain.

The washing machine must be connected to the available power source.

Contractor must ensure washer operates levelly and smoothly without excessive movement.

On-site training for operators.

Removal of old machine and relocation of new machine to rug room, given depot entrance of the plant is 5m wide and 4.2m high. (Please see

ATTACHMENT 2).