13T0048-0001_atch2_Spec_Final_Revised.doc

Attachment 2 to RFQ No. FA5209-13-T-0048-0001

Attachment

Vehicle Specifications – Transit Bus

1. Description:

Bus Motor, Transit, 44 Passenger, Right Hand Drive, Diesel Engine Driven, Left Side Passenger Service Entrance

LIN: C39977

NSN: 2310-01-090-7709

2. Estimated Mileage:

11,500 miles (18,507 km) per year

3. Dimensions and Other Specifications:

a. Model:

1) Used vehicle with year 2009 or newer

2) HINO Blue Ribbon II or Equal

b. Odometer reading:

Appx 47,000 miles or below

c. Overall Length:

Minimum 10,700 mm

d. Overall Width:

Minimum 2,400 mm

e. Overall Height:

Minimum 3,000 mm

f. Body Inside Length:

Minimum 10,000 mm

g. Body Inside Width:

Minimum 2,300 mm

h. Body Inside Height:

Minimum 2,050 mm

i. Wheel Base:

Between 5,100 mm and 5,300 mm

j. Engine Displacement:

Minimum 12,800 cc with turbo

k. Horsepower(PS)/RPM:

Minimum 250/2200

l. Transmission:

The manufacturer’s standard manual transmission shall be furnished. The transmission shall provide one reverse and not less than five forward speeds with power assist shift capabilities (Finger Control Transmission). Forward gear ratios shall be compatible for operating short, medium and long distances over the highway and expressway. Easy go system to prevent roll back on hills.

m. Air Conditioning:

The vehicle shall be equipped with the manufacturer’s recommended air conditioner compatible with the vehicle model being furnished. Outlets will be conveniently located above the passenger and driver area. The air conditioning system shall be powered by a diesel engine.

n. Heating:

The vehicle shall be equipped with the powerful heater that warm up inside all area. Enough outlets to keep all interior area warm will be furnished (Minimum: two outlets on the left side and other two on the right side).

o. Heater/Defroster:

Vehicle shall be equipped with the manufacturer’s recommended system designed for the model being furnished.

p. Sun Visor:

Yes, adjustable height and angle

q. Brake:

Full-air with exhaust brake and ABS

r. Steering:

Powered and furnish controls on the right side of vehicle.

s. Seating:

Seats shall be bench type capable of seating two people with a seat width of 850 mm per seat. Distance between seats shall be a minimum of 700 mm. In addition, a seat at the emergency door must not be foldable when the door is closed (the seat must be foldable when the door is open).

t. Seat Configuration:

No jump and bus guide seats. Two (2) rows of seats (Ten (10) 2-pax seats on right and left row), one (1) 5- pax seat at the very back, and a driver’s seat.

u. Seat belts and harness: For all seats including the seat at the Emergency Exit.

v. Baggage Compartment:

Weather proof compartment shall be provided under the floor with openings on both sides of bus (Swinging Type). Compartment shall be illuminated with an on & off switch located on both sides of the bus at the compartment door opening.

w. Fuel Tank:

Minimum 400 liter (appx 105 gallons) including a spare tank.

x. Interior mirrors:

Larger flat type mirrors, not regular type.

y. Exterior mirrors:

Square type and not the round type.

z. AM/FM Radio:

Yes

aa. Air bags

Yes if possible

ab. Interior light

Overhead light/lamp for the driver’s seat

ac. Storage Underside storage compartment (small compartment for cleaning supplies)

ad. Tachograph:

Yes (Daily type)

ae. Auxiliary power:

Yes

(Cigarette sockets)

af. Speakers/Microphone sockets:

Yes

ag. Back up camera and monitor:

Yes (Black and White type) with automatic lens cover

ah. Passenger Door:

Two piece (double section) folding door on left side forward section of bus, air operated by the driver. In addition, a switch to open/close the passenger door from exterior shall be furnished.

ah. Emergency exit/door:

Located on right rear side of vehicle.

ai. Window:

Tinted (Darker ones, not regular UV-ray block type), UV-ray blocker for all windows, except front windshield, driver’s side and passenger side. Side windows shall be fixed type on the bottom and split slide type on the top portion.

aj. Window stoppers:

Window stoppers that let all of the windows open only 6 inches shall be installed (excluding a window at the driver’s seat).

ak. Emergency Repair Kit:

Jack, lug wrench, (2) chock blocks, triangle emergency sign, and other equipments for emergency repair, i.e. small tool kit.

al. Vehicle Color/design:

Color which fits business scene.

am. Rustproof:

Undercoating, rustproofing at the maximum level that fits local conditions.

an. Number Plate:

Not necessary

ao. Tires:

Mix tires (tubeless) for all seasons. Spare tire as well.

ap. Snow Chains:

For all drive axle tires

aq. Controls and operating mechanisms:

All controls, operating mechanisms and doors shall be located for right hand drive. Controls shall be complete and conveniently operable by the driver when in a seated position. Lever controls shall be designed and located to permit easy entrance and exit of the operator to and from the driver’s seat. Instruments shall be panel mounted and shall be clearly visible to the driver when seated in the normal diving position. Instruments and controls shall be identified. (English and Japanese) as to their function and installed in a manner to facilitate removal and servicing.

ar. Body:

The body shall be mounted on a chassis or may be of unit body and chassis construction. The bus shall be forward control type with seating for the driver forward of the front axle. The body shall have sides of the full-skirted type, shall present a generally symmetrical appearance, shall effectively exclude engine fumes and exhaust gases from the bus interior, and shall provide safe and comfortable transportation for passengers and driver.

as. Suspension:

Air-suspension.

at. Destination sign compartment:

A destination sign compartment shall be installed at the front center of the roof above the windshield. The compartment shall provide not less than 180 square inches (0.117 square meters) of glass enclosed frontal area of a height to permit reading of 6-inch (152 mm) letters on the sign roller and shall be readily accessible through a latched door from inside the bus. The destination sign shall be a roller type of a capacity to apply 15 listings of 6-inch (152 mm) high letters and shall be operable from the interior of the bus. A blank destination sign roll shall be furnished. The compartment shall be illuminated to permit reading of the destination sign at night.

au. School Sign Holders and Plates:

Each vehicle shall be furnished three sign holders and blank aluminum plates. First sign holder shall be placed at the front center below the windshield and the plate shall be painted white both front and back. Second sign holder shall be placed at the rear left side below the windshield and this plate shall be painted white on the front and not painted (muku) on the back. Last sign holder shall be placed at the right of passenger service door, below first window from front and the plate shall be painted white on the front and not painted (muku) on the back.. All sign plates shall be inserted from the top of the holders.

Front

330mm(13 inch) x 550mm(21.65 inch)

Rear

530mm(20.87 inch)

750mm(29.53 inch)

Side

150mm(5.91 inch)

230mm(9.06 inch)

School bus triangle seal: One school bus triangle seal per bus that fits on the front school sign plate shall be provided.

Sign Holder Locations

av. Voltage Converter:

Voltage converter, 12 Volts, 30 Amp

aw. Technical Manual and Parts Catalog:

2 sets for each location.

ax. Interior warning sign shall be furnished.