A-14_Attachment_2_Description.pdf

Attachment 2 for FA5209-13-Q-AO03

Bench Mounted CNC (Computerized Numeric Controlled)/ Manual Lathe QTY

Takisawa Model TAC-360 with FANUC-20iT (or equal) with Accesrories listed below 1 set

1 Center (MT No 4) MT No.4 固定センター、

2 Center Sleeve (MT No5 x NT No.3) センタースリーブ （MT No.5 x NTNo.3)

3 調整工具 1 set

4 7 inch 3Jaws Scroll Chack 3爪7インチスクロールチャック

5 後方スプラッシュカバー

6 フロントカバー

7 切削油装置

8 入出力機能付メモリーカード(32MB)

Fee for removal an old machine and other related charges 撤去費 1 set

● System should be space saving model

Other Requirements

● 日本語マニュアル(取説、修理書、部品表)

＊英語があれば英語の物も

● Trial Run and Inspection on Site

● Initial Training for users at least 2days or more for basic handling of machine.

● One Year Warranty 1年保障

Machine Spec

Overall

MachineSize(mm)： Maximum : W2100 x H1800 x D1200

Swing over bed : 360mm Bed上の振り

Swing over cross : 190mm 横送り台上の振り

Center distance : 700mm 心間仕様

Bed width : 160mm 横送り台上の幅

Weight : 1200Kg 機械の重量

Spindle nose : A1-5 主軸端形式

Spindle through hole : 40mm 主軸横穴径

Spindle speed (RPM) : 60-2000 速度範囲

Number of speeds : 24 ( Low 12, High 12 with Optional Command) 速度範囲

Spindle center : MT No4 芯押軸テーパ

Longitudinal feed range : 680mm 往復台最大移動量(長手方向)

Cross feed range : 165mm 横送り台最大移動量(径方向)

Range of English threads

999.99999-0.05080 TPI インチネジの範囲

Number of English threads :

32+8 インチネジ種類

Range of Metric threads : 0.001-500.00 mm 切削速度送り範囲

Number of Metric threads

32+8 メートルネジ種類

Drive motor : 2.2/3.7 Kw 主軸電動機

Control system : Both CNC*program (*Fanuc -20iT or equal) Drive and Manual Control

Must have compact arrangement of RAKU-

RAKU™(or equal) Expert System Controls

CNC制御

独自ソフトらく

らく名人

Number of the control axis :

2 制御軸数

Minimum Input Range : 0.001 mm 最小設定単位

Display : Approx 8.4 inch Color LCD with Japanese Display 表示

Input & Output Interface : RS-232C (Dsub 25, female) PC Card Slot 入出力インターフェイス

DESCRIPTION

FEED AND THREADING

CONTROL UNIT

Technical Publications such as Operator's manual, Technical (repair) manual, and parts catalogue in Japanese( and English if available)

A wide viriety of machining* can be easily done using CNC unique software

(language in Japanese) *Tapering, arc cutting, threading, step-forming, and tracing , etc)

HEADSTOCK

Tool set

Back Side Splash Cover (1 set)

Front Cover (1 set)

Cutting Lublication System (1 set)

Input/Output Function for 32MB Memory Card (1 set)