Sources Sought Notice_Playground Surfacing_19Nov26.pdf
PDF 596 KB Posted
- Solicitation number
- FA5205-PKP-SourcesSought-001
About this file
This is a Sources Sought Notice issued by the 35th Contracting Squadron (35 CONS) on behalf of the 35th Civil Engineering Squadron (35 CES) for market research purposes regarding poured-in-place playground safety surfacing systems available in Japan for potential use at Misawa Air Base, Japan.
The Government seeks to identify commercially available poured-in-place playground safety surfacing systems equivalent in performance and function to PebbleFlex that are available through Japan-based manufacturers, authorized distributors, suppliers, and installers. The referenced PebbleFlex product is not considered feasible due to binder and transportation limitations associated with ocean transit. The anticipated requirement may include furnishing and installation of surfacing materials, delivery to Misawa Air Base, complete or supervised installation, substrate preparation and assessment, integration with concrete curbs and sidewalks, drainage recommendations, product documentation, and post-installation inspection and certification if commercially available. The Government has not established a final acquisition approach, quantity, installation schedule, or contract type.
Minimum salient characteristics require compliance with ASTM F1292 (Impact Attenuation of Surfacing Materials), ASTM F1951 (Accessibility of Surface Systems), and Consumer Product Safety Commission guidelines for unitary material impact surfacing. The surfacing system must be poured-in-place, two-course, ADA-compliant fall protection material with minimum thickness of 2.5 inches (thicker if required based on fall height), tapered to grade at concrete expansion joints, and strictly installed by an approved installer. Systems must provide critical-height values equal to or greater than the highest accessible part or fall height of associated playground equipment, support 0–5-foot fall heights and 6–7-foot fall heights as specified in Attachments 1 and 2, and be suitable for Misawa Air Base environmental conditions. Concrete slabs must have 2% slope for proper drainage with no surface water ponding, and concrete specifications are detailed in Attachment 3.
Interested parties must submit capability statements of no more than ten pages (excluding technical data sheets, product literature, test reports, and safety data sheets) addressing company information, product technical capabilities, Japan availability and delivery capability, installation capability, relevant experience with up to three similar projects, and commercial information including rough-order-of-magnitude pricing. Responses must be submitted electronically in PDF format to the three listed points of contact by 11 December 2026 at 0900 hours Japan Standard Time. Questions must be submitted by 1 December 2026 at 0900 hours JST. This notice does not constitute a solicitation or commitment to procure, nor will the Government reimburse respondents for response costs.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SOURCES SOUGHT NOTICE
Poured-in-Place Playground Safety Surfacing Available in Japan
Notice Type: Sources Sought / Request for Information
Response Due: 11 Dec 2026, 0900 hours (Japan Standard Time (JST))
Contracting Office: 35th Contracting Squadron (35 CONS)
Requiring Activity: 35th Civil Engineering Squadron (35 CES)
Place of Performance: Misawa Air Base, Japan
Point of Contact:
Ms. Miyako Fujimoto, Contracting Officer Email: miyako.fujimoto.jp@us.af.mil
Mr. Takafumi Nosaki, Contract Administrator Email: takafumi.nosaki.jp@us.af.mil
Ms. Shoko Suzuki, Contract Administrator Email: shoko.suzuki.jp@us.af.mil
1. INTRODUCTION
This Sources Sought Notice is issued solely for market-research and planning purposes. It does not constitute a solicitation, request for quotation, request for proposal, or commitment by the
Government to procure supplies or services.
The Government will not reimburse respondents for any costs incurred in preparing or submitting information in response to this notice. A response to this notice is not an offer and will not be accepted by the Government as an offer.
The information obtained through this notice will assist the Government in determining the availability of capable sources and developing an appropriate acquisition strategy for a potential future requirement.
2. PURPOSE
The 35 CONS is conducting market research to identify commercially available poured-in-place playground safety surfacing systems equivalent in performance and function to PebbleFlex that are available in Japan.
The Government seeks to determine whether manufacturers, distributors, suppliers, and/or installers located in Japan can provide a compliant surfacing system for potential use at Misawa
Air Base, Japan.
mailto:miyako.fujimoto.jp@us.af.mil mailto:takafumi.nosaki.jp@us.af.mil mailto:shoko.suzuki.jp@us.af.mil
The Government is particularly interested in products that are:
• Commercially distributed in Japan; or
• Available from a Japan-based authorized distributor or installer
The referenced PebbleFlex surfacing system is not considered feasible for this requirement because of binder and transportation limitations associated with ocean transit. This notice is not limited to a specific brand name. Interested parties may identify alternate products that meet or exceed the functional and performance characteristics described below.
3. DESCRIPTION OF ANTICIPATED REQUIREMENT
The potential requirement may include the furnishing and, if determined necessary, installation of a poured-in-place playground safety surfacing system at Misawa Air Base, Japan.
The anticipated scope may include, but is not limited to:
1. Furnishing poured-in-place playground safety surfacing materials;
2. Delivery of materials to Misawa Air Base, Japan;
3. Providing complete installation, installation supervision, or technical installation support;
4. Preparing or assessing the compatibility of the existing or proposed substrate;
5. Integrating the surfacing with concrete curbs, sidewalks, and playground-equipment areas;
6. Providing drainage recommendations;
7. Providing product data, installation instructions, safety data sheets, warranty information, and maintenance guidance; and
8. Providing post-installation inspection, testing, or certification documentation, if commercially available.
The Government has not established a final acquisition approach, quantity, installation schedule, or contract type at this time.
4. MINIMUM SALIENT CHARACTERISTICS
Interested parties shall identify whether their proposed system meets the following salient characteristics. Any deviation shall be clearly identified and explained.
4.1 General System Characteristics
The alternative must comply with ASTM F1292, Impact Attenuation of Surfacing Materials and with ASTM F1951 Accessibility of Surface Systems. Surfacing must also meet Consumer
Product Safety Commission (CPSC) guidelines for acceptability of unitary material for impact surfacing around playground equipment.
The depth of surfacing must meet critical height requirements for installed and modified playground equipment. The poured in place, two course, ADA compliant, fall protection impact surfacing shall be not less than two- and one-half inches (2-1/2”) thick, thicker if required, and shall be tapered to grade at the existing concrete expansion joints forming the perimeter of the playground. The system must be strictly installed by an approved installer.
The concrete slab and play surfaces must have a 2% slope to ensure proper drainage. Completed impact surfacing must also be free draining without surface water ponding.
The proposed system shall:
1. Be a poured-in-place resilient safety surfacing system designed for use at playgrounds.
2. Be suitable for installation beneath and around playground equipment.
3. Provide impact attenuation suitable for the applicable fall height of adjacent playground equipment.
4. Have a critical-height value equal to or greater than the highest accessible part/fall height of the associated playground equipment.
5. Be compatible with concrete curbs, sidewalks, concrete slabs, or compacted aggregate bases, as applicable.
6. Be suitable for use in the environmental conditions anticipated at Misawa Air Base, Japan.
7. Be available for procurement and delivery in Japan.
8. Include manufacturer-recommended installation, handling, storage, curing, repair, and maintenance procedures.
9. Be supported by technical documentation demonstrating product performance and suitability for playground use.
4.2 Nominal Configuration: 0–5-Foot Fall Height (See Attachment 1)
4.3 Nominal Configuration: 6–7-Foot Fall Height (See Attachment 2)
4.4 Concrete Slab Specifications: (See Attachment 3)
5. INFORMATION REQUESTED FROM INTERESTED PARTIES
Interested parties are requested to submit a capability statement addressing the following information.
5.1 Company Information
Provide:
• Company name;
• Physical address;
• Name, title, telephone number, and email address of the primary point of contact;
• Unique Entity ID (UEI), if applicable;
• Commercial and Government Entity (CAGE) code, if applicable;
• Business size and socioeconomic status, if applicable;
• Identification of the company’s role as manufacturer, authorized distributor, supplier, installer, or subcontractor; and
• Applicable NAICS code(s).
5.2 Product Information and Technical Capability
• Product name, manufacturer, and country of manufacture;
• Description of the proposed poured-in-place safety surfacing system;
• Product technical data sheets;
• Product composition and layer configuration;
• Nominal thicknesses for surfacing systems supporting 0–5-foot and 6–7-foot fall heights;
• Documentation supporting critical-height and impact-attenuation performance;
• Applicable product testing, certifications, or test reports;
• Product color, finish, and design options;
• Product warranty information;
• Expected service life;
• Routine maintenance requirements;
• Repair procedures; and
• A detailed explanation of any exceptions to the salient characteristics in this notice.
5.3 Japan Availability and Delivery Capability
• Whether the proposed product is manufactured, stocked, warehoused, or commercially distributed in Japan;
• Name and address of the Japan-based manufacturer, distributor, supplier, and/or installer;
• Location of the nearest product inventory or warehouse;
• Confirmation that the proposed product can be delivered to Misawa Air Base, Japan;
• Estimated delivery lead time after receipt of an order;
• Whether the material or any components require shipment from outside Japan;
• Identification of any binder, temperature-control, shelf-life, hazardous-material, customs, import, or transportation limitations;
• Product literature, safety data sheets, and installation instructions available in English and/or Japanese; and
• Experience delivering similar material within Japan, to overseas locations, or to U.S.
Government installations.
5.4 Installation Capability
State whether the respondent can provide:
• Product-only delivery;
• Complete installation at Misawa Air Base, Japan;
• Installation supervision;
• Installer training; or
• Technical support during installation.
If installation is available, provide:
• Location and qualifications of installation personnel;
• Availability of Japan-based installers or subcontractors;
• Experience installing comparable poured-in-place playground surfacing systems;
• Typical installation duration for comparable projects;
• Required site access, utilities, staging area, equipment, and Government-furnished support;
• Any anticipated host-nation labor, access, weather, or site-condition considerations; and
• Availability of post-installation testing, inspection, or certification.
5.5 Relevant Experience
Provide up to three examples of recent projects involving poured-in-place playground safety surfacing that are similar in scope or technical complexity. For each project, provide:
• Customer name;
• Project location;
• Brief description of the work performed;
• Period of performance;
• Approximate project value;
• Whether the work included installation; and
• Customer point of contact, if authorized for release.
5.6 Commercial Information
If available, provide:
• Rough-order-of-magnitude pricing for material-only delivery;
• Rough-order-of-magnitude pricing for delivery and installation;
• Minimum order quantities;
• Typical delivery lead time;
• Standard warranty terms;
• Recommended contract structure or ordering method; and
• Any commercial practices or site conditions the Government should consider in planning a future acquisition.
6. RESPONSE INSTRUCTIONS
Interested parties shall submit a capability statement of no more than ten pages, excluding technical data sheets, product literature, test reports, and safety data sheets. For files larger than
15MB, please send an email requesting a DoD Safe drop-off at least 2 business days prior to the suspense due date.
Responses shall be submitted electronically in PDF format to:
• Ms. Miyako Fujimoto, Contracting Officer Email: miyako.fujimoto.jp@us.af.mil
• Mr. Takafumi Nosaki, Contract Administrator Email: takafumi.nosaki.jp@us.af.mil
• Ms. Shoko Suzuki, Contract Administrator Email: shoko.suzuki.jp@us.af.mil
Responses are due no later than: 11 Dec 2026, 0900 hours (JST)
The email subject line shall read:
Sources Sought Response – Poured-in-Place Playground Safety Surfacing – [Company
Name]
Respondents shall include the notice number in the email subject line and within the capability statement.
7. QUESTIONS
Questions concerning this Sources Sought Notice shall be submitted in writing to the point of contact identified above no later than 1 Dec 2026, 0900 hours (JST).
The Government may elect to post responses to questions or otherwise provide clarifications.
The Government is under no obligation to respond to all questions received.
8. NOTICE TO RESPONDENTS
The Government is seeking to identify sources capable of providing a poured-in-place playground safety surfacing system equivalent in performance and function to PebbleFlex that is available in Japan for potential delivery and installation at Misawa Air Base, Japan.
Responses from Japan-based manufacturers, authorized distributors, suppliers, and installers are strongly encouraged.
This Sources Sought Notice does not constitute a solicitation. The Government has not made a decision regarding whether to issue a future solicitation, the acquisition strategy, the applicable
NAICS code, or whether any future requirement will be set aside for a particular category of business concern.
Attachment 1
Attachment 2
Attachment 3
File details come from the government source that posted it. Updated .