Attachment_3_-_1988-0162_Rev._15_(12.26.2018).pdf

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF

LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 1988-0162 Daniel W. Simms Division of | Revision No.: 15 Director Wage Determinations| Date Of Last Revision: 12/26/2018 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.60 for calendar year 2019 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.60 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2019. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Alaska

Area: Alaska Statewide **Fringe Benefits Required Follow the Occupational Listing**

Employed on contract for removal of oil spills hazardous waste materials and

Page 1 of 13beta.SAM.gov

10/15/2019https://beta.sam.gov/wage-determination/1988-0162/15/document related cleanup services.

OCCUPATION CODE - TITLE FOOTNOTE RATE

(not set) - Laborers-Group 1 (see 1) 29.99 (not set) - Laborers-Group 2 (see 1) 30.92 (not set) - Laborers-Group 3 (see 1)

a) Laborers- Group 3 31.75

b) General Foreman 33.44

d) Powder Foreman/Drill Foreman 37.40

c) Laborer Foreman 31.75 (not set) - Operating Engineers-Group 1A (see 2) 37.99 (not set) - Operating Engineers-Group 1 (see 2)

i) Master Mechanic 40.99

a) Operating Engineering Group 1 36.23

b) Apprentice - 1st Period 60% 0- 21.74 1000 Hrs

c) Apprentice - 2nd Period 70% 1001- 25.36 2000 Hrs

d) Apprentice - 3rd Period 80% 2001- 28.98 3000 Hrs

e) Apprentice - 4th Period 85% 3001- 30.80 4000 Hrs

e) Apprentice - 5th Period 90% 4001- 32.61 5000 Hrs

f) Apprentice - 6th Period 95% 5001- 34.42 6000 Hrs

g) Forman 39.49

h) General Foreman 40.99 (not set) - Operating Engineers-Group 2 (see 2) 35.46 (not set) - Operating Engineers-Group 3 (see 2) 34.74 (not set) - Operating Engineers-Group 4 (see 2) 28.53 (not set) - Truck Driver-Group 1A (see 3) 38.02 (not set) - Truck Driver-Group 1 (see 3) 36.78 (not set) - Truck Driver-Group 2 (see 3) 35.56 (not set) - Truck Driver-Group 3 (see 3) 34.76 (not set) - Truck Driver-Group 4 (see 3) 34.21

Page 2 of 13beta.SAM.gov

(not set) - Truck Driver-Group 5 (see 3) 33.46

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) Fringe benefits applicable to all classes of Laborers engaged in contrat performance equals $15.40 per hour per employee.

Page 3 of 13beta.SAM.gov

2) Fringe benefits applicable to all classes of Operating Engineers engagaed in contract performance equals $17.05 per hour per employee.

3) Fringe benefits applicable to all classes of truckdrivers engaged in contract performance equals $14.30 per hour per employee.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract by the employer by the state or local law etc.) the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition where uniform cleaning and maintenance is made the responsibility of the employee all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount or the furnishing of contrary affirmative proof as to the actual cost) reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However in

Page 4 of 13beta.SAM.gov those instances where the uniforms furnished are made of ""wash and wear"" materials may be routinely washed and dried with other personal garments and do not require any special treatment such as dry cleaning daily washing or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract by the contractor by law or by the nature of the work there is no requirement that employees be reimbursed for uniform maintenance costs.

** NOTES APPLYING TO THIS WAGE DETERMINATION **

Under the policy and guidance contained in All Agency Memorandum No. 159 the Wage and Hour Division does not recognize for section 4(c) purposes prospective wage rates and fringe benefit provisions that are effective only upon such contingencies as ""approval of Wage and Hour issuance of a wage determination incorporation of the wage determination in the contract adjusting the contract price etc."" (The relevant CBA section) in the collective bargaining agreement between (the parties) contains contingency language that Wage and Hour does not recognize as reflecting ""arm's length negotiation"" under section 4(c) of the Act and 29 C.F.R. 5.11(a) of the regulations. This wage determination therefore reflects the actual CBA wage rates and fringe benefits paid under the predecessor contract.

The duties of employees under job titles listed are those described in the ""Service Contract Act Directory of Occupations"" Fifth Edition April 2006 unless otherwise indicated. Copies of the Directory are available on the Internet. A links to the Directory may be found on the WHD home page at http://www.dol.

gov/esa/whd/ or through the Wage Determinations On-Line (WDOL) Web site at http://wdol.gov/.

Page 5 of 13beta.SAM.gov

REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE {Standard Form

1444 (SF 1444)}

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e. the work to be performed is not performed by any classification listed in the wage determination) be classified by the contractor so as to provide a reasonable relationship (i.e. appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination. Such conformed classes of employees shall be paid the monetary wages and furnished the fringe benefits as are determined. Such conforming process shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees. The conformed classification wage rate and/or fringe benefits shall be retroactive to the commencement date of the contract. {See Section 4.6 (C)(vi)} When multiple wage determinations are included in a contract a separate SF 1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award the contractor prepares a written report listing in order proposed classification title(s) a Federal grade equivalency (FGE) for each

Page 6 of 13beta.SAM.gov proposed classification(s) job description(s) and rationale for proposed wage rate(s) including information regarding the agreement or disagreement of the authorized representative of the employees involved or where there is no authorized representative the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action together with the agency's recommendations and pertinent information including the position of the contractor and the employees to the Wage and Hour Division Employment Standards Administration U.S. Department of Labor for review. (See section 4.6(b)(2) of Regulations 29 CFR Part 4).

4) Within 30 days of receipt the Wage and Hour Division approves modifies or disapproves the action via transmittal to the agency contracting officer or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour decision to the contractor.

6) The contractor informs the affected employees.

Information required by the Regulations must be submitted on SF 1444 or bond paper.

When preparing a conformance request the ""Service Contract Act Directory of

Page 7 of 13beta.SAM.gov

Occupations"" (the Directory) should be used to compare job definitions to insure that duties requested are not performed by a classification already listed in the wage determination. Remember it is not the job title but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split combine or subdivide classifications listed in the wage determination.

** OCCUPATIONS NOT INCLUDED IN THE SCA DIRECTORY OF OCCUPATIONS **

Laborers-Group 1

Base and Floor Machineman; Brush Cutters; Buffing Machine Operator*; Camp Maintenance Laborers; Carpenters Tenders or Helper; Choke Setters; Coaters*;

Compactor; Crusher Plant Laborer; Demolition Laborers; Ditch Diggers; Dope Pot Fireman*; Dryerman; Dump Man; Fire Watch Laborer; Fire Watch (Certified);

Flagperson; Form Strippers; General Laborers; Grinder (not in preparation for welding)*; Guardrail Laborer; High Presser Water Operator; Hydro-Seeder Nozzle Operator; Building Laborers; Landscaper or Planter; Material Handlers Hook Tenders;

Monolithic Workers (sewer worker); Oil Spill Laborers; Paper Latchers*; Pipe Cleaning*; Pit Man; Pneumatic or Power Tools; Portable or Chemical Toilet Servicer;

Pre-heat for doping or cleaning; Pump Man or Mixer Man; Railroad Track Laborer;

Sandblast Pot Tender; Saw Tender; Scaffold Building and Erecting; Signalman; Stake Hopper; Steam Point or Water Jet Operator; Steam Cleaning Operator; Swamp (including but not limited to sidebooms gin-pole trucks winch trucks forklifts etc.)*;

Tank Cleaning; Tapers*; Utiliwalk and Utilidor Laborer; Window Cleaner.

*Pipeline classifications.

Page 8 of 13beta.SAM.gov

Laborers-Group 2

Asphalt Workers (shoveler plant crew; tar rubber add $.25 per hour); Concrete Laborer (curb and gutter chute handler grouting curing screeding); Rigger;

Slurry Work.

Laborers-Group 3

Burning and Cutting Torch; Catalyst Epoxy; Cement or Line Dumper of Handler (sack or bulk); Chainsaw Filer; Chainsaw Operator; Choker Splicer; Chunk Tender (wagon air track and hydraulic drills); Concrete Laborers (pore buggy concrete saws pumpcrete nozzleman vibrator); Foam Gun or Foam Machine Operator; Green Cutter (Dam Work); Guardrail Layout; Gunnite Operator; Incinerator Operator; Insulator;

Jackhammer or Pavement Breakers; Laser Instrument Operators; Mason Tender and Mud Mixer (sewer worker); Maintenance Man; Oil Spill Laborer (marine work); Powder Helper; Power Saw Operator; Railroad Switch Layout Laborer; Road Crossing (casings)*; Sandblaster; Sewer Caulkers; Sewer Plant Maintenance Man; Sloper (over 20'); Thermal Plastic Applicator; Timber Faller; Timberman; VSM Drill Helper (changing teeth etc.)*; Water Blaster (Dam Work). *Pipeline classifications.

Operating Engineers-Group 1

Asphalt Roller; A-frame Trucks; Helicopter; Transporters; Deck Winches - Double Drum; Backfiller; Batch Plant Operator; Batch and Mixer over 200 yards; belcrete with power pack and similar; Bending Machine; Bulldozer; Cableway and Highline all sizes; Cleaning Machine; Coating machine; Cranes; Shovels; Backhoes; Draglines; Clam Shells; Crawler truck type floating locomotive Whirley either over or under three yards or over or under 150 foot boom including jib; Hydralifts; Hyster Cat Cranes and attachments side booms over and under 45 tons; Crusher; Derrick;

Ditching/Trenching Machine (16"" or over); Drilling Machines (Cove Cable Rotary

Page 9 of 13beta.SAM.gov and Exploration); Finishing Machine; Concrete Paving Sidewalk Curb and Gutter Machine; Hydro Ax and similar; Loaders - Elevator belt type Euclid and similar types; Loaders - Forklifts with power boom and swing attachments Overhead and /Front-end 2-1/2 yards and over; Loader with forks or pipe clamps mechanics welders bodyman; Mixers - marble type with hoist combination; Motor Patrol Grader over 14; Mucking Machines - mode tunnel drill and/or shield; Nodwell Sno Cat;

Dredge Operator; Piledriver Engineer; L.B. Foster Puller or similar Paving Basket;

Power Plant Turbine Operator 300 K.W. and over (power plants or unites over 300 K.

W. or quarry operations); Sauerman - Bagley; Scraper Tournapull Caterpillar Euclid and similar type equipment over 25 yards; Shot Blast Machine; Spreader - Blaw knox Cedarapids Screed Barber Green Slurry Machine; Sub-grader (Gurriers CMI and Roto Mills similar equipment types); Tack Tractor; Truck Mounted Concrete Pumps;

Water Kotc Machine; Hover Craft Flex Craft Loadmaster Air Cushion Terrain Vehicle; Cableways Rolligan; Dredge Barge - Cable Highline or Cable Car; Camp Maintenance Engineer; Boat Coxswains; Tower Crane Pecco; Loaders over four yards;

Motor Patrol Grader (when finishing to final graders and/or to hubs or for asphalt); Power Plants - 1000 K.W. and over; Quad; Slip Form Payer; C.M.I. and similar types; Tournapulls Caterpillar; Euclid scraper and similar type equipment over 40 yards.

Operating Engineers-Group 1A

Camera/Tool/Video Operator (Slipline) Cranes-over 45 tons or 150 foot (including jib and attachments) (a) Shovels backhoes excavators with all attachments draglines clamshells-over 3 yards; (b) Tower Cranes; Licensed Water/Waste Water Treatment Operator; Loaders over 5 yards; certified Welder Electrical Mechanic Camp Maintenance Engineer Mechanic (0ver 10000 hours); Motor Patrol Grader Dozer Grade Tractor (finish: when finishing to final grade and/or to hubs or for asphalt; Power Plants: 1000 k.w. and over; Quad; Screed; Sidebooms over 45 tons;

Slip Form Paver C.M.I. and similar types; Scrapers over 40 yards.

Operating Engineers-Group 2

Page 10 of 13beta.SAM.gov

Batch Plant Operators; Batch and Mixer 200 yards per hour and under; Boiler - Firemen; Cement Hog and Concrete Pump Operator 44 Compressors; Steel erection including sandblasting painting of same Piledriving; Conveyors (except as listed in Group 1); Hoist on steel erection; Towermobiles and Air Tuggers; Loaders Elevating Grader Dumore and similar; Locomotives; Rod and Geared Engines; Mixers;

Screening Plant Service Oiler; Journeyman sideboom (cradding rock drill regardless of size); Skidder; Trenching Machine under 16"".

Operating Engineers-Group 3

A"" Frames Trucks; Deck Winches; Single Drum Bombardier (tack or tow rig); Boring Machine; Brooms Power Wayne Saginaw and similar types; Bump Cutter (Concut Christenson or similar types); Compressors; Excavating; Drill Tender; Farm Tractor;

Fork Lift Industrial Type; Gin Truck or Winch Truck (with poles when used or hoisting); Hoist Air Tuggers Elevators; Loaders (Elevating-Athey Barber Green and similar types; Fork Lifts or Lumber Carrier Fork Lifts with Tower; Overhead/Front End under 2-1/2); Locomotives (Dinkey) air steam gas and electric; Speeders;

Mechanics - light duty; Mixer; Concrete Mixer and Batch 200 yards per hour and under; Oil Blower Distributors; Pipeline Dream; Post Hole Diggers Mechanical; Pot Fireman (power agitated); Power Plant Turbine Operator Under 300 K.W.; Pumps - Filler Kenyon Water Rig Oiler over 45 tons over three yards or over 150 feet boom; Rollers Tampers Vibrators all except asphalt saws concrete; Straightening Machine; Tower Tractor.

Operating Engineers-Group 4

Rig Oiler (advances to Group 3 if over 45 tons or 3 yards or 150 feet boom); Swamper (on trenching machines or shovel type equipment); Spotter; Steam Cleaner.

Truck Driver-Group 1

Page 11 of 13beta.SAM.gov

Semi with Double Box Mixer; Dump Trucks (including rock buggy and trucks with pups) over 40 yards up to and including 60 yards up to and including 60 yards; Deltas Commander Rollagons and similar equipment with pulling sleds trailers or similar equipment; Boat coxswains Helicopter Transports; Lowboys including attached trailers and jeeps twelve axles. (Over twelve axles or 150 tons to be negotiated.)

Truck Driver-Group 1A

Dump Trucks including rockbuggy and trucks with pups over 60 yards up to and including 100 yards (over 100 yards to be negotiated); Jeeps (driver under load).

Truck Driver-Group 2

Turn-O-Wagon or DW-10 not self loading; All Delta's Commanders Rollagons and similar equipment; Mechanics; Tireman; Dump Trucks (including rockbuggy to and trucks with pups) over 20 up to and including 40 yards.

Truck Driver-Group 3

Dump Truck including rockbuggy and trucks with pups over ten yards up to and including 20 yards; Lowboys including attached trailers and jeeps up to and including eleven axles; Oil Distributor Drivers; compactor (when pulled by rubber tired equipment); Water Wagon when pulled by Euclid or similar type equipment;

Partsman.

Truck Driver-Group 4

Buggymobile: Semi or Truck and Trailer; Dumpster; Batch Trucks over 5 yards; Dump Trucks (including Rockbuggy and trucks with pups) up to and including 10 yards; Gin

Page 12 of 13beta.SAM.gov

Pole Driver; Track Truck Equipment; Stringing Truck; Fuel Truck Fuel Handler with Truck; Grease Truck; Flat Beds Dual rear axle; Hyster Operators (handling bulk aggregate); Lumber Carriers; Water Wagon Simi; Water Wagon Dual Axle; Winch Truck Wrecker Flat Bed including ""A"" frame manufactured rating over 5 tons; Front End Loader with/forks; Bus Operators over 30 passengers; All Terrain Vehicles; Boom Truck/Knuckle Truck over 5 tons; Foam Distributor Truck Dual Axle; Hydro Seeders- Dual Axle; Vacuum Truck Truck Vacuum Sweepers-Dual Axle; Loadmanster (air and water operations); Air cushion or similar type vehicle; Fire Truck-Dual axle; Greasers;

Rigger-non warehouse operations; Expeditor.

Truck Driver-Group 5

Batch Truck up to and including 7 yards; Boom Truck/Knuckle Truck up to and including 5 tons; Buffer Truck; Bull Lifts and Fork Lifts Fork Lifts with Power Boom and Swing attachments up to and including 5 tons; Bus Operators up to 30 passengers; Farm type Rubber Tired Tractor (when material handling or pulling wagons on a construction project); Flat Beds Single rear axle; Foam Distributor Truck Single axle; Fuel Handler (station/bulk attendant); Gear/Supply Truck; Gin Pole Truck Winch Truck wrecker Truck Mounted ""A"" Frame manufactured rating 5 tons and under; Gravel Spreader Box Operator on Truck; Hydro Seeder - Single axle;

Pickups (pilot cars and all light duty vehicles); Rigger/Swamper; Tack Truck; Team Drivers (Horses Mules and similar equipment); Water Wagon (Below 250 Bbls)."

Page 13 of 13beta.SAM.gov