ONAN_6K_Inspection_Update_PWS_(FBO_Version).pdf

PERFORMANCE WORK STATEMENT

FOR

INSPECTION OF ONAN GENERATORS

AT

EIELSON AIR FORCE BASE, ALASKA

Project:

Perform Inspection and Maintenance of ONAN Generators

At Eielson AFB Central Heat and Power Plant

20 March 2015

1.0 INTRODUCTION

Eielson AFB (EAFB) operates four 1.5MW Onan Generators to provide augmented electrical capacity in support of the Central Heat and Power Plant (CH&PP) facility.

This Performance Work Statement defines the performance requirements for the inspection and maintenance on all four Onan Generators per the Original Equipment Manufacturer’s (OEM) maintenance recommendations.

2.0 LOCATION

EAFB is located approximately 23 miles southeast of Fairbanks, Alaska. The Central Heat and Power Plant is located in Building 6203. This facility is accessible from Arctic Avenue and is contained within the secured portion of the base.

3.0 INSTRUCTIONS TO THE CONTRACTOR

Perform inspection and maintenance requirements outlined in the OEM Maintenance Manual required of the 6000 hour inspection for the Onan Generators listed below.

Generator #1 Generator #2 Model: 1500 DFMB Model: 1500 DFMB

Generator Serial Number: D980718421 Generator Serial Number: D980718420 Engine Model: KTA50-G2 Engine Model: KTA50-G2

Engine Serial Number: 33140317 Engine Serial Number: 33140312

Generator #3

Generator #4

Model: 1500 DFMB Model: 1500 DFMB Generator Serial Number: D980718418 Generator Serial Number: D980718419 Engine Model: KTA50-G2 Engine Model: KTA50-G2

Engine Serial Number: 33140322 Engine Serial Number: 33140326

4.0 PROJECT OBJECTIVES

The objective of this work is to perform 6000 hour inspection and maintenance requirements of the Cummins/Onan Operations and Maintenance Manual for K38 & K50 Engine Series (3810497-02) and Cummins/Onan Generator Operator

Manual DFLB/DFLD/CFLC/DFMB (960-0105/2-96).

This will include the preceding inspection and maintenance items such as 250 hour, 500 hour, and annual inspection and maintenance requirements.

5.0 DESCRIPTION OF WORK

The contractor must verify inspection and maintenance procedures in accordance with the OEM recommended maintenance and repair manuals.

5.1 THE GOVERNMENT WILL PROVIDE THE FOLLOWING

Electricity and plant air for running tools.

5.2 THE CONTRACTOR WILL SUPPLY THE FOLLOWING

Full time supervision for the duration of the project.

Sufficient personnel that have been trained and certified by Cummins Power Generation to perform the appropriate OEM maintenance and inspection requirements.

All personnel, tools, materials, and equipment to complete the project.

Responsible for appropriate disposal of all HAZWASTE associated with inspection and maintenance of this project.