COMBO.doc

COMBINED SYNOPSIS/SOLICITATION ‘COMBO’:

Test Administrator Services

(i) This is an amended combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.

(ii) Solicitation FA5000-17-T-0092 is issued as a Request for Quotation (RFQ).

(iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95, effective 19 Jan 2017. The DFARS provisions and clauses are those in effect to DPN 20161222, effective 22 Dec 2016. The AFFARS provisions and clauses are those in effect to AFAC 2017-0127, effective 27 Jan 2017.

(iv) This requirement is solicited as 100% Small Business Set-Aside. The North American Industrial Classification System (NAICS) code associated with this procurement is 611710 with a small business size standard of $15,000,000.00

(v) The Pricing Schedule is incorporated as Attachment 1. Vendors shall complete Attachment 1 in its entirety and return with any other documentation/data as required by this Combo.

(vi) The government intends to award a firm-fixed price contract for the following:

See Attachment 1: Pricing Schedule

(vii) All services shall be performed in accordance with (IAW) Performance Work Statement at Joint Base Elmendorf – Richardson (JBER), Alaska.

(viii) FAR 52.212-1 Instructions to Offerors -- Commercial Items (Jan 2017) is hereby incorporated by reference, with the same force and effect as if it were given in full text. In addition to the following addendum, all terms and conditions of FAR 52.212-1 remain in effect. The following have been tailored to this procurement and are hereby added via addendum:

1. To assure timely and equitable evaluation of the quote, the vendors must follow the instructions contained herein. The quote must be complete, self-sufficient, and respond directly to the requirements of this solicitation.

2. Specific Instructions: The response shall consist of two (2) separate parts:

a. Part 1- Technical Acceptability - Submit one (1) copy of technical acceptability narrative.

b. Part 2- Price – Submit one (1) copy of price schedule and any pertinent additional information.

3. Award will be made to the vendor whose quote is conforming to the solicitation and is determined to be the lowest price technically acceptable. Technical Acceptability, at a minimum, is defined as meeting all of the criteria and specifications in Attachment 1. Price and technical acceptability will be considered. All related costs for contractor performance shall be clearly explained and included in their offer for Test Administrator Services.

(ix) FAR 52.212-2 Evaluation -- Commercial Items (Oct 2014) this provision has been tailored to this procurement and is provided in full-text below:

(a) The Government will award a contract resulting from this solicitation to the responsible vendors whose quote conforming to the solicitation will be most advantageous to the Government, price (including all options) and other factors considered. The following factors shall be used to evaluate quotes:

(i) Technical acceptability

(ii) Price

(b) Price (including all options) and technical acceptability will be considered. The Government intends to evaluate quotes and award without discussion, but reserves the right to conduct discussions. Therefore, the vendor’s initial quote should contain the vendor’s best terms from a price and technical standpoint. The lowest priced quote (including all options) will be evaluated for technical acceptability. If the quote is found technically acceptable, award will be made without further consideration. If it is found technically unacceptable, the Government will evaluate the next lowest quote for technical acceptability until award can be made to the lowest priced technically acceptable vendors. Therefore, the vendor’s initial quote should contain the vendor’s best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. Quotes that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.

(c) This will be a lowest price technically acceptable purchase. Technical acceptability – at a minimum, is defined as meeting the following criteria:

Minimum Qualifications: Contractor must be able to provide services IAW PWS. The selected contractor/individual must have at least two years remaining at the current duty station to provide for continuity. Contractor must also be able to meet minimum qualifications outlined in sections 3 and 4.4. All related costs for contractor performance shall be clearly explained in their offer and included in their price for each test administrator service.

(d) A written notice of award or acceptance of a quote mailed or otherwise furnished to the successful vendor within the time for acceptance specified in the quote, shall result in a binding contract without further action by either party. Before the quote’s specified expiration time, the Government may accept a quote (or part of a quote), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of Provision)

(x) Each vendor shall ensure the provision at FAR 52.212-3 including its Alternate I, Vendors Representations and Certifications--Commercial Items (Jan 2017), are updated at www.sam.gov. Failure to obtain SAM registration will result in submissions not being considered for award.

(xi) The clause at FAR 52.212-4, Contract Terms and Conditions – Commercial Items (Jan 2017), is hereby incorporated by reference, with the same force and effect as if it were given in full text.

(xii) The clause at FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders – Commercial Items (Jan 2017), is hereby incorporated by reference, with the same force and effect as if it were given in full text.

(xiii) The clause at FAR 52.217-8, Option To Extend Services, is hereby incorporated by full text below:

Option to Extend Services (Nov 1999) The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within 15 days.

(End of Clause)

(xiv) The clause at FAR 52.217-9, Option To Extend The Term of The Contract, is hereby incorporated by full text below:

Option to Extend the Term of the Contract (Mar 2000)

(a) The Government may extend the term of this contract by written notice to the Contractor not later than 30 days prior to contract expiration; provided that the Government gives the Contractor a preliminary written notice of its intent to extend not later than 30 days before the contract expires. The preliminary notice does not commit the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 66 months.

(End of Clause)

(xv): The clause at FAR 52.222-42, Statement of Equivalent Rates for Federal Hires, is hereby incorporated by full text below:

Statement of Equivalent Rates for Federal Hires (May 2014) In compliance with the Service Contract Labor Standards statute and the regulations of the Secretary of Labor (29 CFR part 4), this clause identifies the classes of service employees expected to be employed under the contract and states the wages and fringe benefits payable to each if they were employed by the contracting agency subject to the provisions of 5 U.S.C. 5341 or 5332.

This Statement is for Information Only:

It is not a Wage Determination

(End of Clause)

(xvi): The clause at DFARS 252.222-7000, Statement of Equivalent Rates for Federal Hires, is hereby incorporated by full text below:

RESTRICTIONS ON EMPLOYMENT OF PERSONNEL (MAR 2000)

(a) The Contractor shall employ, for the purpose of performing that portion of the contract work in Alaska, individuals who are residents thereof and who, in the case of any craft or trade, possess or would be able to acquire promptly the necessary skills to perform the contract.

(b) The Contractor shall insert the substance of this clause, including this paragraph (b), in each subcontract awarded under this contract.

(End of clause)

(xvii): The clause at AFFARS 5352.242-9000, Contractor Access To Air Force Installations is hereby incorporated by full text below:

CONTRACTOR ACCESS TO AIR FORCE INSTALLATIONS (NOV 2012)

(a) The contractor shall obtain base identification and vehicle passes, if required, for all contractor personnel who make frequent visits to or perform work on the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished, contractor identification badges while visiting or performing work on the installation.

(b) The contractor shall submit a written request on company letterhead to the contracting officer listing the following: contract number, location of work site, start and stop dates, and names of employees and subcontractor employees needing access to the base. The letter will also specify the individual(s) authorized to sign for a request for base identification credentials or vehicle passes. The contracting officer will endorse the request and forward it to the issuing base pass and registration office or Security Forces for processing. When reporting to the registration office, the authorized contractor individual(s) should provide a valid driver’s license, current vehicle registration, valid vehicle insurance and certificate to obtain a vehicle pass.

(c) During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to the work site.

(d) When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with AFI 31-501 citing the appropriate paragraphs as applicable.

(e) Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office.

(f) Failure to comply with these requirements may result in withholding of final payment.

(End of clause) Additionally, the following clauses apply to this acquisition:

(xiii) Options- This contract will include one (1) base year and three (3) option years; therefore, clauses FAR 52.217-8, Option to Extend Services, and FAR 52.217-9, Option to Extend the Term of the Contract will be included in this contract.

(xiv) N/A

(xv) NOTICE TO ALL INTERESTED PARTIES:

Questions shall be submitted to Contract Specialist, Jeannette Morphew at jeannette.morphew@us.af.mil or Jamie Screeton at jamie.screeton@us.af.mil no later than 2:00 PM AKDT on 22 June 2017. An amendment will be issued, if needed, providing the Government’s answers to any questions received.

Quotes are due no later than 2:00 PM AKDT on 27 June 2017. Quotes shall include the following:

a. Part 1- Technical Acceptability - Submit one (1) copy of technical acceptability narrative.

b. Part 2- Price – Submit one (1) copy of price schedule as well as any additional pertinent information

BASIS OF CONTRACT AWARD: This is a competitive action in which award shall be made to the lowest priced, technically acceptable quote. Pricing shall be evaluated to include all options!

(xvi) Quotations shall be submitted to Contract Specialist, Jeannette Morphew at jeannette.morphew@us.af.mil. For information regarding this solicitation, contact the same.

List of Attachments:

· Attachment 1: Pricing Schedule

· Attachment 2: Performance Work Statement (PWS)

· Attachment 3: Wage Determination (Rev.-22)

· Attachment 4: DFARS 252.203-7994

· Attachment 5: DFARS 252.203-7995

· Attachment 6: DFARS 252.209-7991

FA5000-17-T-0071

Attachment 1: PRICING SCHEDULE 1 Page

0001:

Base Year TCM Assistant - 4 Hour Test Session

Period of Performance Base Year: 1 Aug 17 – 31 Jul 18 Tuesday and Thursday: 0730-1630

1001:

Option Yr1 TCM Assistant - 4 Hour Test Session

Period of Performance

Base Year: 1 Aug 18 – 31 Jul 19

Tuesday and Thursday: 0730-1630

2001:

Option Yr2 TCM Assistant - 4 Hour Test Session

Period of Performance

Base Year: 1 Aug 19 – 31 Jul 20

Tuesday and Thursday: 0730-1630

3001:

Option Yr3 TCM Assistant - 4 Hour Test Session

Period of Performance

Base Year: 1 Aug 20 – 31 Jul 21

Tuesday and Thursday: 0730-1630

THIS QUOTE EXPIRES ON: _________________________

Business Size: Small Large Women-Owned Veteran-Owned Other:__________________________

NOTE: The individual signing must be a signatory official for this Entity; signature constitutes agreement to all terms/conditions contained within this solicitation.

FA5000-17-T-0071

Attachment 2: PWS 7 Pages

PEFORMANCE WORK STATEMENT

Non-Personal Services Contract for Education and Training Services (ETS) Test Center Manager (TCM) Assistant for JBER JBER, AK

8 May 2017

(a) DESCRIPTION OF SERVICES: Non-personal services in support of Test Center Manager (TCM) assistance with testing programs, to include Air Force Professional Military Education (PME) testing, Course Exam (CE) for Career Development Course (CDC) testing, Defense Language Proficiency Testing (DLPT), Defense Language Aptitude Battery (DLAB) testing, Job Standard Training (JST) testing, Weighted Airmen Promotion System (WAPS) testing, Armed Forces Classification (AFCT) testing, Air Force Reading Abilities Test (AFRAT), Electronic Data Processing Test (EDPT), and the Air Force Officer Qualification Test (AFOQT).

(b) PERIOD OF PERFORMANCE: Period of performance for this contract is 1 August 2017 to 31 July 2018 with three (3) option years. The selected contractor/individual must have at least two years remaining at the current duty station to provide for continuity.

(c) QUALIFICATIONS: A baccalaureate degree from a regionally accredited American college or university is preferred. Excellent customer service skills, verbal communication skills, and attention to detail are required. Appropriate related professional work or volunteer experience of at least 1 year is preferred. Knowledge of/experience with standardized educational and military testing programs is preferred. Knowledge of/experience with Microsoft Office Suite (Word, PowerPoint, Excel, and Access) is required. Test Center Manager (TCM) Assistant responsibilities are outlined in the Services Summary Section under Para 4.13 & Para 4.14. Position is operated by one individual and will adhere to the performance objectives outlined in Para 4.1

(d) SERVICES SUMMARY:

4.1 OVERVIEW: This Services Summary identifies both the performance objectives for those factors and the performance threshold required for each performance objective. The Government reserves the right to survey all services called for in the contract to determine whether or not the performance objectives and goals were met. This service summary (SS) lists the performance objectives for the required service that the Government shall survey.

Methods of surveillance may change after contract award, based on, but not limited to:

Customer Complaints.

Contractor performance.

Performance Evaluation. Performance of a service will be evaluated to determine whether or not it meets the performance threshold. Re-performance is the preferred method of correcting any unacceptable performance.

Paragraph #

4.1.1 WORK HOURS/DAYS: The contractor shall work the following days and customer service hours for testing:

Tuesday and Thursday: 0730-1630

For purposes of this contract, these times shall be considered “normal” business hours for testing. The TCM or ETS Chief will notify the contractor of any changes to normal business hours for testing no later than 7 calendar days prior to the effective date.

4.1.2 The contractor will take one unpaid lunch hour Tuesday and Thursday from 1130-1230 or at a time mutually agreed upon by the contractor and the TCM or ETS Chief. Exact days and times of service may be modified by mutual agreement according to changing program needs.

4.1.3 Tuesday and Thursday, there will be two four-hour testing sessions each day, 0730-1130 and 1230-1630, and each session will consist of all activities required to conduct that session, to include preparation for the current session and preparation for future testing sessions. The expected number of testing sessions for this period of performance will be 204, subject to all other provisions set forth in this contract.

4.2 RECOGNIZED HOLIDAYS: The contractor will not work on the following days:

· New Year’s Day (1 January)

· Martin Luther King’s birthday (3rd Monday of January)

· President’s Day (3rd Monday of February)

· Memorial Day (last Monday of May)

· Independence Day (4 July or other designated observance date)

· Labor Day (1st Monday of September)

· Columbus Day (2nd Monday of October)

· Veteran’s Day (11 November or other designated observance date)

· Thanksgiving Day (4th Thursday of November)

· Christmas Day (25 December or other designated observance date)

· New Year’s Eve (31 December)

4.2.1 NON-STANDARD HOLIDAYS: The contractor will not work on PACAF Family Days, Wingman “Down” days, or other days off established by the Base Commander, PACAF Commander, POTUS, or other designated DoD official authorized to grant days off.

The TCM or ETS Chief will determine the number of testing sessions required each week and will notify the contractor of any intended schedule changes no later than 7 calendar days prior to the new schedule. If a scheduled test session must be canceled due to emergency or insufficient enrollment (three students or less), the TCM or ETS Chief will provide the contractor at least 24 hours’ notice. Contractor will be required to contact and reschedule students affected by cancellations no later than 24 hours of the start of the test session. Contractor will arrive on time to perform all necessary administrative tasks prior to start of a test session to ensure sessions begin promptly, and will provide constant visual supervision throughout the entire session and support the TCM or ETS Chief in the performance of testing duties. Sessions will not be completed until the final administrative activities are completed and all examinees are finished. Only the TCM or ETS Chief may make changes to the testing schedule.

4.3 GOVERNING DIRECTIVES: Include but are not limited to the following documents:

· AFI 36-2649, Voluntary Education Program

· AFI 36-2605, Air Force Military Personnel System

AU/4/6 TCO GUIDE, related messages (available upon request)

· DLPT V User and Web Administration Guide (available upon request)

4.4. SECURITY REQUIREMENTS FOR UNCLASSIFIED CONTRACTS

4.4.1. Background Checks: Effective 1 Oct 2008, all contractor/employee applications must be accompanied by a background check. Contractor/employee passes will NOT be processed without a background check. The National Background Check printout must accompany the 0- 180 and can be obtained using some of the following websites:

· www.CriminaIWatchDog.com

· SentryLink.com/Criminal-Check

· www.criminalbackgroundrecords.com Please note that these checks, at a minimum, must include a State, National Criminal, and SS Validation checks. These are just a few websites to complete the required checks but in no way endorsed by the USAF.

4.4.1.1 Disqualifying Factors: There are eight factors that will disqualify a contractor from gaining installation access:

1. U.S. citizenship, immigration status, or Social Security Account Number cannot be verified.

2. Barred from entry/access to any military installation or facility.

3. Wanted by federal or civil law enforcement authorities, regardless of the offense/violation (i.e. an “order of arrest" has been issued by a judge).

4. Incarcerated for l2 months or longer within the past five years, regardless of offense/violation.

5. Any conviction of espionage, sabotage, treason, terrorism, or murder.

6. Conviction of a sexual assault or classified as a sexual offender, rape, child molestation, armed assault/robbery, firearms or explosives violation, drug possession with intent to sell, or drug distribution within the past 10 years.

7. Name appears on any federal agency's "watch list" or "hit list" for criminal behavior or terrorist activity.

8. Individual is currently serving their first year of parole or probation for any felony offense.

4.4.1.2 Listing of Employees: The contractor shall maintain a current listing of employees. The list shall include the employee's name, social security number and type of investigation if contract work involves unescorted entry to Air Force restricted areas or other sensitive areas designated by the installation commander. The list shall be provided to the Program Manager and sponsoring agencies Security Manager. An updated listing shall be provided when an employee's status or information changes.

4.4.1.3 Security Training: The contractor shall maintain all qualifications for a base network user account (including initial and recurring information assurance training) and shall maintain and hold a National Agency Security check.

4.5 PASS AND IDENTIFICATION ITEMS: The contractor shall be responsible for obtaining all necessary cards, passes, badges, buttons, and decals to perform work requirements. The contractor shall be required to apply for vehicle and individual identification media through the contracting office and the 673rd Security Forces Squadron, Pass and ID Section. This identification shall be surrendered to the Pass and ID Section upon completion or termination of

The contract, or upon termination of an individual’s employment. The contractor shall provide each employee with identification badge that shall include the employee’s name, employee’s photograph, and contractor’s company name. Identification shall be available prior to employment and shall be worn or attached to the outer garment at all times while on the installation. If Government CAC Card is provided this is acceptable in lieu of Contractor provided badge.

4.6 TRAFFIC LAWS: The contractor and its employees shall comply with base traffic regulations.

4.7 WEAPONS, FIREARMS, AND AMMUNITION: The contractor employees are prohibited from possessing weapons, firearms, or ammunition, on themselves or within their contractor-owned vehicle or privately owned vehicle while on JBER Elmendorf.

4.8 FOR OFFICIAL USE ONLY (FOUO) INFORMATION: The contractor shall comply with DoD 5400-7-R, Chapter 4, DoD Freedom of Information Act (FOIA) Program, requirements. This regulation sets policy and procedures for the disclosure of records to the public and for marking, handling, transmitting, and safeguarding FOUO material.

4.9 REPORTING REQUIREMENTS: The contractor personnel shall report to an appropriate authority any information or circumstances of which they are aware may pose a threat to the security of DOD personnel, contractor personnel, resources, and classified or unclassified defense information. Their immediate supervisor upon initial on-base assignment shall brief contractor employees.

4.10 PHYSICAL SECURITY. The contractor shall be responsible for safeguarding all government property and controlled forms provided for contractor use. At the end of each work period, all government facilities, equipment, and materials shall be secured.

4.11 KEY CONTROL. The contractor shall establish and implement methods of making sure all keys issued to the contractor by the Government are not lost or misplaced and are not used by unauthorized persons. The contractor shall not duplicate any keys issued by the government.

a. The contractor shall immediately report to the TCM or ETS Chief any occurrences of lost or duplicated keys.

b. In the event keys, other than master keys, are lost or duplicated, the contractor may be required, upon written direction of the contracting officer, to re-key or replace the affected lock or locks without cost to the government. The government may, however, at its option, replace the affected lock or locks or perform re-keying and deduct the cost of such from the monthly payment due the contractor. In the event a master key is lost or duplicated, the government shall replace all locks and keys for that system and the total cost deducted from the monthly payment due the contractor.

c. The contractor shall prohibit the use of keys, issued by the government, by any persons other than the contractor’s employees and the opening of locked areas by contractor employees to permit entrance of persons other than contractor employees engaged in performance of contract work requirements in those areas.

d. The contractor shall control access to all government provided lock combinations to preclude unauthorized entry. The contractor is not authorized to record lock combinations without written approval by the TCM or ETS Chief.

4.12 SPECIAL REQUIREMENTS:

a. Contractor must inform the TCM or ETS Chief of anticipated absence from a scheduled work day at least 24 hours prior to scheduled arrival. If desired, longer absences may be scheduled with the coordination of the TCM or ETS Chief. Such absences should not exceed two weeks at a time or four weeks in one fiscal year. Extended absences will not be scheduled when quarterly reports are due or when either the TCM or his/her alternate is on scheduled leave or TDY.

b. Contractor must successfully complete PME, CDC, DLPT, DLAB, JST, WAPS, AFCT, and AFOQT on-the-job training (OJT), formal training and testing, and any other associated training. These training and testing requirements are at no cost to the contractor.

c. In performance of contract requirements, contractor is authorized access to non-classified examinations and to the security container in which they are held.

d. When directed by the TCM, his/her alternate, or ETS Chief to preside or co-preside over a testing session, contractor must remain physically present in the testing facility during the entire test session unless relieved by an appropriate authority.

e. Contractor must notify and gain approval from the TCM or ETS Chief for any subcontracting.

4.13 SPECIFIC TASKS:

a. The contractor shall assist the TCM in the administration of the following categories of tests to eligible military and civilian personnel and their dependents as authorized by the Air Force, PACAF, ETS Chief, and local regulations (NOTE: additional tests may be added as needed):

b. All EOC/CDC, PME, JST, DLPT, DLAB, WAPS, AFCT, and AFOQT testing, and any other exams as directed by the TCM through the ETS Chief.

c. Other tests used in local advisement or guidance programs, to include career assessment and interest inventories, as requested by the TCM or ETS Chief.

d. At the direction of the TCM or ETS Chief, contractor will perform testing duties solo when needed.

NOTE: The contractor shall administer tests in accordance with instructions provided in testing handbooks, test examiner guides, and TCO/ATCO instructions to ensure no possibility of test compromise.

4.14 ADMINISTRATIVE TASKS: The following tasks are elements of performance in the contract which must be performed in conjunction with and in addition to the actual test administration. This includes processing all necessary paperwork and performing administrative tasks required for optimum operation of all testing programs.

4.14.1 Scheduling

a. Check the edoffice@elmendorf.af.mil or other designated organizational e-mailbox to schedule students for testing sessions and notify students of enrollment in the session.

b. Coordinate with Unit Training Managers, WAPS monitors, and unit representatives for scheduling specialized examinations such as WAPS, EOC/CDC, JST and DLPT V testing.

4.14.2 Preparatory Actions

a. Print administrative documents including test logs, test registration and authorization reports, and any other appropriate documentation for testing.

b. Prepare eligibility rosters and spreadsheets.

c. Unlock master server, computer-based examinations and individual computer workstations prior to each session.

d. Check room prior to testing to ensure proper spacing between desks and that adequate lighting, heat, and air exist. Ensure testing office and testing room are kept in a condition conducive to good test performance, and that an adequate circulation of fresh air is available.

e. Withdraw all exams from safe prior to start of each test session.

f. Check test materials for marks/missing pages before issuing them to students.

g. Refer all questions on testing policy or procedures to the TCM or ETS Chief.

4.14.3 Session Activities

a. Verify the examination for each student.

b. Check photo identification of each student before allowing them to test.

c. Maintain tests logs, showing the individual’s name, the test title, and the start and stop times for all test intervals. Ensure each student signs this log upon receiving his/her test and that all entries are complete and legible.

d. Conduct the required briefings for each examination using guidance from the appropriate governing directives or locally established instructions.

e. Review each answer sheet as it is submitted by the examinee to ensure proper completion.

f. Annotate students and examinations in the Air Force Automated Education Management System (AFAEMS) inventory database or other designated system of record.

4.14.4 Post Session Activities

a. Complete safe and test office security forms at close of each test session. Ensure no money, supplies, forms, envelopes, inventories, brochures or booklets are stored in the safe.

b. Lock the safes and testing office doors and windows before leaving the testing office.

c. Prepare completed answer sheets, tests, and any unused tests that may need to be returned, for mailing to the various testing agencies or schools, according to the instructions for each type of test. All documents required for mailing will be fully completed by the contractor, except for the TCM signature, prior to final check and sealing by the TCM.

d. Inform TCM or ETS Chief immediately of any irregularities, particularly those that may present the potential for a test compromise or complaint from a testing candidate.

e. Prepare examinations for mailing in accordance with guidance in local and AF procedures. Log all certified mail and fax examinations as appropriate.

f. Prepare score reports and test materials for electronic and/or mail submission to designated organizations or personnel.

h. Maintain statistical data related to test administration as required by TCM, ETS Chief, and Base Training Manager, and assist with reports and PowerPoint slides as requested.

Such data will include (but not necessarily be limited to) monthly statistics on types of tests administered and to whom (by rank and service) and any additional test related data required for semi-annual and annual reports or AF leadership briefings.

4.14.5 Inventory Control

a. Log in exams upon receipt and enter test, serial, or other applicable test identification information into the appropriate database NLT the first duty day after the exams are received.

b. Assist TCM or other designated official with test inventories, test material destruction, and any required reports.

c. Identify exams or other test material that needs to be distributed to students or other organizations and individuals and forward to the appropriate entities.

d. Perform electronic test inventory updates NLT 2 business days after notification of upload availability.

e. Follow appropriate destruction procedures for test materials IAW AF policy and guidance and established local procedures.

f. Maintain all document and correspondence files in a neat and orderly manner. Separate files by calendar or fiscal year, depending on program and/or records management requirements. Contractor will be responsible for making file labels and setting up the file for each new calendar or fiscal year.

5. MATERIALS AND EQUIPMENT: The government will provide all necessary equipment, supplies and materials to include workstations, computer (with internet access), telephone and other materials and equipment mutually agreed to fulfill the requirements of this contract. Materials for the performance of the contract must be maintained at the worksite. Use of government equipment for personal use is not authorized.

6. TERMINATION: Contract may be terminated IAW the termination clauses contained within the contract.

FA5000-17-T-0071

Attachment 3: Wage Determination 11 Pages WD 05-2017 (Rev.-22) was first posted on www.wdol.gov on 01/03/2017

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2005-2017 Daniel W. Simms Division of | Revision No.: 22

Director Wage Determinations| Date Of Revision: 12/30/2016

_______________________________________|____________________________________________ Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.20 for calendar year 2017 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.20 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2017. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

____________________________________________________________________________________ State: Alaska

Area: Alaska Statewide

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations

01011 - Accounting Clerk I

15.33

01012 - Accounting Clerk II

18.76

01013 - Accounting Clerk III

20.98

01020 - Administrative Assistant

23.34

01040 - Court Reporter

18.84

01051 - Data Entry Operator I

14.86

01052 - Data Entry Operator II

17.86

01060 - Dispatcher, Motor Vehicle

20.25

01070 - Document Preparation Clerk 15.39

01090 - Duplicating Machine Operator 14.72

01111 - General Clerk I

15.59

01112 - General Clerk II

17.01

01113 - General Clerk III

19.09

01120 - Housing Referral Assistant

21.01

01141 - Messenger Courier

15.60

01191 - Order Clerk I

15.45

01192 - Order Clerk II

16.86

01261 - Personnel Assistant (Employment) I 19.07

01262 - Personnel Assistant (Employment) II 21.33

01263 - Personnel Assistant (Employment) III 23.79

01270 - Production Control Clerk

22.59

01280 - Receptionist

14.09

01290 - Rental Clerk

16.84

01300 - Scheduler, Maintenance

16.84

01311 - Secretary I

16.84

01312 - Secretary II

18.84

01313 - Secretary III

21.01

01320 - Service Order Dispatcher

16.48

01410 - Supply Technician

23.34

01420 - Survey Worker

18.78 01531 - Travel Clerk I

15.21

01532 - Travel Clerk II

16.80

01533 - Travel Clerk III

18.57

01611 - Word Processor I

16.18

01612 - Word Processor II

18.16

01613 - Word Processor III

20.31

05000 - Automotive Service Occupations

05005 - Automobile Body Repairer, Fiberglass 27.64

05010 - Automotive Electrician

23.64

05040 - Automotive Glass Installer

21.87

05070 - Automotive Worker

21.87

05110 - Mobile Equipment Servicer 19.62

05130 - Motor Equipment Metal Mechanic 23.96

05160 - Motor Equipment Metal Worker 21.87

05190 - Motor Vehicle Mechanic

23.96

05220 - Motor Vehicle Mechanic Helper 18.53

05250 - Motor Vehicle Upholstery Worker 21.87

05280 - Motor Vehicle Wrecker

21.87

05310 - Painter, Automotive

22.86

05340 - Radiator Repair Specialist

21.87

05370 - Tire Repairer

17.78

05400 - Transmission Repair Specialist 23.96

07000 - Food Preparation And Service Occupations

07010 - Baker

16.67

07041 - Cook I

15.17

07042 - Cook II

17.46

07070 - Dishwasher

10.99

07130 - Food Service Worker

13.46

07210 - Meat Cutter

18.87

07260 - Waiter/Waitress

11.91

09000 - Furniture Maintenance And Repair Occupations

09010 - Electrostatic Spray Painter

25.94

09040 - Furniture Handler

17.36

09080 - Furniture Refinisher

25.94

09090 - Furniture Refinisher Helper

19.58

09110 - Furniture Repairer, Minor

22.74

09130 - Upholsterer

25.94

11000 - General Services And Support Occupations

11030 - Cleaner, Vehicles

11.68

11060 - Elevator Operator

11.68

11090 - Gardener

17.52

11122 - Housekeeping Aide

14.15

11150 - Janitor

14.15

11210 - Laborer, Grounds Maintenance 14.59

11240 - Maid or Houseman

10.96

11260 - Pruner

13.18

11270 - Tractor Operator

16.53

11330 - Trail Maintenance Worker

14.59

11360 - Window Cleaner

15.67

12000 - Health Occupations

12010 - Ambulance Driver

22.66

12011 - Breath Alcohol Technician 20.48

12012 - Certified Occupational Therapist Assistant 22.50

12015 - Certified Physical Therapist Assistant 21.90

12020 - Dental Assistant

20.32

12025 - Dental Hygienist

44.92

12030 - EKG Technician

29.90

12035 - Electroneurodiagnostic Technologist 29.90

12040 - Emergency Medical Technician 22.66

12071 - Licensed Practical Nurse I 18.31

12072 - Licensed Practical Nurse II 20.48

12073 - Licensed Practical Nurse III 22.84 12074 12100 - Medical Assistant 17.49

12130 - Medical Laboratory Technician 21.01

12160 - Medical Record Clerk

16.04

12190 - Medical Record Technician 17.94

12195 - Medical Transcriptionist

20.41

12210 - Nuclear Medicine Technologist 43.70

12221 - Nursing Assistant I

13.27

12222 - Nursing Assistant II

14.92

12223 - Nursing Assistant III

16.28

12224 - Nursing Assistant IV

18.27

12235 - Optical Dispenser

20.20

12236 - Optical Technician

18.31

12250 - Pharmacy Technician

17.55

12280 - Phlebotomist

18.27

12305 - Radiologic Technologist

29.67

12311 - Registered Nurse I

28.98

12312 - Registered Nurse II

35.45

12313 - Registered Nurse II, Specialist 35.45

12314 - Registered Nurse III

42.88

12315 - Registered Nurse III, Anesthetist 42.88

12316 - Registered Nurse IV

51.40

12317 - Scheduler (Drug and Alcohol Testing) 25.38

13000 - Information And Arts Occupations

13011 - Exhibits Specialist I

21.09

13012 - Exhibits Specialist II

25.29

13013 - Exhibits Specialist III

30.90

13041 - Illustrator I

21.09

13042 - Illustrator II

25.29

13043 - Illustrator III

30.90

13047 - Librarian

25.66

13050 - Library Aide/Clerk

15.59

13054 - Library Information Technology Systems 23.84

Administrator

13058 - Library Technician

19.63

13061 - Media Specialist I

16.71

13062 - Media Specialist II

18.70

13063 - Media Specialist III

20.85

13071 - Photographer I

19.50

13072 - Photographer II

23.82

13073 - Photographer III

27.01

13074 - Photographer IV

33.05

13075 - Photographer V

35.10

13110 - Video Teleconference Technician 18.43

14000 - Information Technology Occupations

14041 - Computer Operator I

17.09

14042 - Computer Operator II

19.12

14043 - Computer Operator III

24.42

14044 - Computer Operator IV 25.98

14045 - Computer Operator V 27.62

14071 - Computer Programmer I (see 1)

14072 - Computer Programmer II (see 1)

14073 - Computer Programmer III (see 1)

14074 - Computer Programmer IV (see 1)

14101 - Computer Systems Analyst I (see 1)

14102 - Computer Systems Analyst II (see 1)

14103 - Computer Systems Analyst III (see 1)

14150 - Peripheral Equipment Operator 18.34

14160 - Personal Computer Support Technician 27.62

15000 - Instructional Occupations

15010 - Aircrew Training Devices Instructor (Non-Rated) 34.09

15020 - Aircrew Training Devices Instructor (Rated) 41.24

15030 - Air Crew Training Devices Instructor (Pilot) 49.42 15050 - Computer Based Training Specialist / Instructor 34.09

15060 - Educational Technologist

25.26 15070 - Flight Instructor (Pilot)

44.47

15080 - Graphic Artist

25.25

15090 - Technical Instructor

23.55

15095 - Technical Instructor/Course Developer 28.83

15110 - Test Proctor

19.12

15120 - Tutor

19.12

16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations

16010 - Assembler

11.14

16030 - Counter Attendant

11.14

16040 - Dry Cleaner

14.19

16070 - Finisher, Flatwork, Machine

11.14

16090 - Presser, Hand

11.14

16110 - Presser, Machine, Drycleaning 11.14

16130 - Presser, Machine, Shirts

11.14

16160 - Presser, Machine, Wearing Apparel, Laundry 11.14

16190 - Sewing Machine Operator 15.20

16220 - Tailor

16.24

16250 - Washer, Machine

12.16

19000 - Machine Tool Operation And Repair Occupations

19010 - Machine-Tool Operator (Tool Room) 26.22

19040 - Tool And Die Maker

32.66

21000 - Materials Handling And Packing Occupations

21020 - Forklift Operator

19.56

21030 - Material Coordinator

22.59

21040 - Material Expediter

22.59

21050 - Material Handling Laborer

17.01

21071 - Order Filler

15.49

21080 - Production Line Worker (Food Processing) 19.56

21110 - Shipping Packer

17.80

21130 - Shipping/Receiving Clerk

17.80

21140 - Store Worker I

14.56

21150 - Stock Clerk

19.82

21210 - Tools And Parts Attendant

19.56

21410 - Warehouse Specialist

19.56

23000 - Mechanics And Maintenance And Repair Occupations

23010 - Aerospace Structural Welder 29.25

23021 - Aircraft Mechanic I

27.66

23022 - Aircraft Mechanic II

29.25

23023 - Aircraft Mechanic III

30.86

23040 - Aircraft Mechanic Helper

21.69

23050 - Aircraft, Painter

27.45

23060 - Aircraft Servicer

24.23

23080 - Aircraft Worker

25.48

23110 - Appliance Mechanic

24.68

23120 - Bicycle Repairer

19.56

23125 - Cable Splicer

32.26

23130 - Carpenter, Maintenance

27.35

23140 - Carpet Layer

24.62

23160 - Electrician, Maintenance

33.25

23181 - Electronics Technician Maintenance I 28.23

23182 - Electronics Technician Maintenance II 33.62

23183 - Electronics Technician Maintenance III 35.69

23260 - Fabric Worker

23.00

23290 - Fire Alarm System Mechanic 25.71

23310 - Fire Extinguisher Repairer 21.40

23311 - Fuel Distribution System Mechanic 28.42

23312 - Fuel Distribution System Operator 24.75

23370 - General Maintenance Worker 21.71

23380 - Ground Support Equipment Mechanic 27.66

23381 - Ground Support Equipment Servicer 24.23 23382 23382 - Ground Support Equipment Worker 25.48

23391 - Gunsmith I

21.40

23392 - Gunsmith II

24.62

23393 - Gunsmith III

27.84

23410 - Heating, Ventilation And Air-Conditioning 26.32

Mechanic

23411 - Heating, Ventilation And Air Contditioning 28.62

Mechanic (Research Facility)

23430 - Heavy Equipment Mechanic 30.13

23440 - Heavy Equipment Operator 29.79

23460 - Instrument Mechanic

27.68

23465 - Laboratory/Shelter Mechanic 26.22

23470 - Laborer

17.01

23510 - Locksmith

25.45

23530 - Machinery Maintenance Mechanic 27.44

23550 - Machinist, Maintenance

27.84

23580 - Maintenance Trades Helper 19.42

23591 - Metrology Technician I 27.68

23592 - Metrology Technician II 29.27

23593 - Metrology Technician III 30.88

23640 - Millwright

27.84

23710 - Office Appliance Repairer

23.24

23760 - Painter, Maintenance

24.94

23790 - Pipefitter, Maintenance

32.26

23810 - Plumber, Maintenance

30.80

23820 - Pneudraulic Systems Mechanic 27.84

23850 - Rigger

27.84

23870 - Scale Mechanic

24.62

23890 - Sheet-Metal Worker, Maintenance 27.48

23910 - Small Engine Mechanic

24.62

23931 - Telecommunications Mechanic I 26.79

23932 - Telecommunications Mechanic II 30.61

23950 - Telephone Lineman

28.61

23960 - Welder, Combination, Maintenance 25.93

23965 - Well Driller

27.05

23970 - Woodcraft Worker

27.84

23980 - Woodworker

21.40

24000 - Personal Needs Occupations

24570 - Child Care Attendant

12.47

24580 - Child Care Center Clerk

15.54

24610 - Chore Aide

14.06

24620 - Family Readiness And Support Services 16.21

Coordinator

24630 - Homemaker

18.94

25000 - Plant And System Operations Occupations

25010 - Boiler Tender

29.26

25040 - Sewage Plant Operator

28.70

25070 - Stationary Engineer

29.26

25190 - Ventilation Equipment Tender 21.66

25210 - Water Treatment Plant Operator 28.70

27000 - Protective Service Occupations

27004 - Alarm Monitor

19.71

27007 - Baggage Inspector

15.91

27008 - Corrections Officer

27.17

27010 - Court Security Officer

26.28

27030 - Detection Dog Handler

18.14

27040 - Detention Officer

27.17

27070 - Firefighter

22.46

27101 - Guard I

15.91

27102 - Guard II

18.14

27131 - Police Officer I

31.05

27132 - Police Officer II

34.50 27133 28000 - Recreation Occupations

28041 - Carnival Equipment Operator 14.59

28042 - Carnival Equipment Repairer 15.47

28043 - Carnival Equpment Worker 11.99

28210 - Gate Attendant/Gate Tender 14.96

28310 - Lifeguard

12.47

28350 - Park Attendant (Aide)

17.23

28510 - Recreation Aide/Health Facility Attendant 12.21

28515 - Recreation Specialist

26.20

28630 - Sports Official

13.72

28690 - Swimming Pool Operator 21.90

29000 - Stevedoring/Longshoremen Occupational Services

29010 - Blocker And Bracer

24.62

29020 - Hatch Tender

24.62

29030 - Line Handler

24.62

29041 - Stevedore I

27.49

29042 - Stevedore II

30.43

30000 - Technical Occupations

30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 35.77

30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 24.66

30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 27.16

30021 - Archeological Technician I 21.46

30022 - Archeological Technician II 24.90

30023 - Archeological Technician III 29.46

30030 - Cartographic Technician

31.78

30040 - Civil Engineering Technician 29.63

30061 - Drafter/CAD Operator I 23.41

30062 - Drafter/CAD Operator II 27.28

30063 - Drafter/CAD Operator III 29.19

30064 - Drafter/CAD Operator IV 34.79

30081 - Engineering Technician I 22.72

30082 - Engineering Technician II 26.56

30083 - Engineering Technician III 29.74

30084 - Engineering Technician IV 33.02

30085 - Engineering Technician V 38.08

30086 - Engineering Technician VI 45.77

30090 - Environmental Technician

22.13

30210 - Laboratory Technician

26.61

30240 - Mathematical Technician

32.95

30361 - Paralegal/Legal Assistant I 21.93

30362 - Paralegal/Legal Assistant II 27.15

30363…