GATR Infastructure Overhaul - Specifications - 5-27-2025.pdf

SPECIFICATION SHEET

Mountain Home AFB, ID

GATR (Remote Radio Site) Infrastructure Overhaul 2 April 2025

1. GENERAL: The 366th Fighter Wing located on Mountain Home AFB, ID requires three (3) mixer-multipliers to convert analog radio communications to fiber optics and ethernet. One (1) mixer-multiplier will be a 2U Chassis (TOWER). Two (2) mixer-multipliers will be a 4U

Chassis (RAPCON & GATR). All with separate requirements for the three (3) individual sites.

2. The Mixer-Multipliers must comply with the following physical and technical operating characteristics for each facility:

2.1 4U MIXER-MULTIPLIER MINIMUM SPECIFICATIONS (RAPCON): The 4U mixer-multiplier for the RAPCON must (at a minimum) comply with the following characteristics:

2.1.1. Power Supply & Chassis: Must be a standard 19-inch 4U chassis and have alternating aurrent redundant power supplies

2.1.1.1. Quantity one (1): TCRM19BR-01-01 JumboSwitch 10G/1G 4U 19in Rack-mount Card Cage, High Temp (-20C to 70C), Power A 115/240VAC N America Plug and Power B 115/240VAC N America Plug Power Supply

2.1.2. Single Mode Fiber/Ethernet Management Card: Two (2) SFP Ports & Two (2)

RJ45 Ethernet Ports required with capability of operating on single mode fiber optic with redundant ethernet capabilities.

2.1.2.1. Quantity one (1): TC3840R-5-000-1-1-05 TC3840 High Temp (-20C to

70C), 2.5G Combo Card for 4U/2U/1U, 2 x 1G SFP ports w/o SFP Transceiver, 2

RJ45 of 10/100/1000M copper ports, with RS232 console port, Fits in JS 1G/10G

4U/2U/1U (TCRM19B/D) Card Cages

2.1.3. 4-Wire 600ohm analog + Dry Contact Cards: Minimum of sixteen (16) 600ohm analog RJ11 ports and minimum of sixteen (16) RJ11 dry contact ports.

2.1.3.1. Quantity four (4): TC3846R-6-000-4-0-05-B Miscellaneous Card for Rack-

Mount High Temp (-20C to 70C), 600 Ohms Analog with Dry Contact 4 wire Analog

4 Ch. Fits in All JumboSwitch Rack or Chassis. Enhance Security "with DB9F to

Audio jack 2.5mm cable, 6ft (620-09A25-06)" "---Designed for use with the JSW

Chassis (4U, 2U, 1U or 2S)---"

2.1.4. Single Mode Fiber Transceivers

2.1.4.1. Quantity one (1): 760-051S1-20 SFP 1.25G Dual Fiber, -20 to +70C

1310nm SM 20Km LC w/DDM

2.2 2U MIXER-MULTIPLIER MINIMUM SPECIFICATIONS (TOWER): The 2U mixer-multiplier for the TOWER must (at a minimum) comply with the following characteristics:

2.2.1. Power Supply & Chassis: Must be a standard 19-inch 4U chassis and have alternating aurrent redundant power supplies

2.2.1.1. Quantity one (1): TCRM19GR-01-01 JumboSwitch 10G/1G 2U 19in Rack-mount Card Cage, High Temp (-20C to 70C), Power A 115/240VAC N America Plug and Power B 115/240VAC N America Plug Power Supply

2.2.2. Single Mode Fiber/Ethernet Management Card: Two (2) SFP Ports & Two (2)

RJ45 Ethernet Ports required with capability of operating on single mode fiber optic with redundant ethernet capabilities.

2.2.2.1. Quantity one (1): TC3840R-5-000-1-1-05 TC3840 High Temp (-20C to

70C), 2.5G Combo Card for 4U/2U/1U, 2 x 1G SFP ports w/o SFP Transceiver, 2

RJ45 of 10/100/1000M copper ports, with RS232 console port, Fits in JS 1G/10G

4U/2U/1U (TCRM19B/D) Card Cages

2.2.3. 4-Wire 600ohm analog + Dry Contact Cards: Minimum of twelve (12) 600ohm analog RJ11 ports and minimum of twelve (12) RJ11 dry contact ports.

2.2.3.1. Quantity three (3): TC3846R-6-000-4-0-05-B Miscellaneous Card for

Rack-Mount High Temp (-20C to 70C), 600 Ohms Analog with Dry Contact 4 wire Analog 4 Ch. Fits in All JumboSwitch Rack or Chassis. Enhance Security

"with DB9F to Audio jack 2.5mm cable, 6ft (620-09A25-06)" "---Designed for use with the JSW Chassis (4U, 2U, 1U or 2S)---"

2.2.4. Single Mode Fiber Transceivers

2.2.4.1. Quantity two (2): 760-051S1-20 SFP 1.25G Dual Fiber, -20 to +70C

2.3 4U MIXER-MULTIPLIER MINIMUM SPECIFICATIONS (GATR): The 4U mixer-multiplier for the GATR must (at a minimum) comply with the following characteristics:

2.3.1. Power Supply & Chassis: Must be a standard 19-inch 4U chassis and have alternating aurrent redundant power supplies

2.3.1.1. Quantity one (1): TCRM19BR-01-01 JumboSwitch 10G/1G 4U 19in

Rack-mount Card Cage, High Temp (-20C to 70C), Power A 115/240VAC N

America Plug and Power B 115/240VAC N America Plug Power Supply

2.3.2. Single Mode Fiber/Ethernet Management Card: Two (2) SFP Ports & Two (2)

RJ45 Ethernet Ports required with capability of operating on single mode fiber optic with redundant ethernet capabilities.

2.3.2.1. Quantity one (1): TC3840R-5-000-1-1-05 TC3840 High Temp (-20C to

70C), 2.5G Combo Card for 4U/2U/1U, 2 x 1G SFP ports w/o SFP Transceiver, 2

RJ45 of 10/100/1000M copper ports, with RS232 console port, Fits in JS 1G/10G

4U/2U/1U (TCRM19B/D) Card Cages

2.3.3. 4-Wire 600ohm analog + Dry Contact Cards: Minimum of twenty-eight (28)

600ohm analog RJ11 ports and minimum of twenty-eight (28) RJ11 dry contact ports.

2.3.3.1. Quantity seven (7): TC3846R-6-000-4-0-05-B Miscellaneous Card for

Rack-Mount High Temp (-20C to 70C), 600 Ohms Analog with Dry Contact 4 wire

Analog 4 Ch. Fits in All JumboSwitch Rack or Chassis. Enhance Security "with

DB9F to Audio jack 2.5mm cable, 6ft (620-09A25-06)" "---Designed for use with the

JSW Chassis (4U, 2U, 1U or 2S)---"

2.3.4. Single Mode Fiber Transceivers

2.3.4.1. Quantity two (2): 760-051S1-20 SFP 1.25G Dual Fiber, -20 to +70C

3. SPECIFICS:

3.1. Shipping must be included in the quotation.

3.1.1. Contractor shall deliver to Airfield Operations –

625 Thunderbolt Ave. Building 261 Room 109

Mountain Home AFB, ID, 83648

3.1.2. Delivery will be no later than 30 days after date of contract (ADC).

4. OPERATIONS SECURITY: The contractor shall comply with 366 FW OPSEC requirements and countermeasures to protect critical information as defined in AFI 10-701, Operations Security.

Contractors shall receive unit specific OPSEC briefing prior to the start of work. Briefing documentation must be completed by the respective unit OPSEC coordinator. The unit OPSEC personnel will provide guidance on protecting critical information, training materials and other instructions as needed. The contractor will comply with the 366 FW OPSEC Policy that imposes a 100% shred requirement of all government related paper products using NSA approved devices only.