Scuba Dive Trailer Questions.pdf
PDF 79 KB Posted
- Attached to
- Customized Scuba Dive Trailer
- Solicitation number
- FA487726QA078
About this file
This is a Questions and Answers document for a federal contract opportunity involving the design and build of a specialized trailer.
The trailer must be constructed with HD 1-1/4" extruded tongue and groove aluminum flooring with a smooth surface finish suitable for rolling gear and wheeled items; aluminum tread plate overlay is not acceptable. The structural components include extruded bedrail and roof rail with 1" x 2 1/2" wall posts spaced at 16" on-center, though 1" x 1 1/4" posts are acceptable based on load rating capabilities. The hitch assembly requires a ball coupler with a 2,500 lbs tongue load rating; an adjustable ball coupler is not necessary, and a fixed coupler meeting the load specification is acceptable. A 5KW generator with adequate housing for maintenance access must be included and installed on the trailer tongue, and all electrical outlets must have water covers. The electrical system includes 110V outlets above the workbench, two 110V outlets in rear corners, and through-wall shore power connections. Climate control consists of roof-mounted AC with heat capability; ducting is not required, though a second AC unit on the rear half of the trailer is an acceptable alternative to a single ducted system. The trailer requires a 65-gallon fresh water tank with exterior fill door, interior vent, and drain plug, equipped with a pump and valve for hose connection to rinse gear. The rear driver's side houses an air compressor unit mounted on a slide-out tray with a roll-up door opening measuring 48" wide by 66" tall and capable of supporting 1,000 lbs.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Updated Technical Data Package.pdf | ||
| Updated Specification Document.pdf | ||
| Updated Provison And Clauses.pdf | ||
| Provision and Clause.pdf | ||
| Specification Document.pdf | ||
| Technical Data Package.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
HD 1-1/4" Extruded tongue and groove aluminum flooring – Only Aluminum tread plate overlay available is that acceptable?
- Not Acceptable (need smooth surface for rolling gear and other wheeled items)
Extruded bedrail and roof rail. Extruded 1" x 2 1/2" wall posts spaced at 16" OC – Only 1” x 1 ¼” available is that acceptable?
- Acceptable based on load rating
2 5/16" adjustable ball coupler, safety chains, breakaway switch, San-pa jack – Not finding a 2 5/16” adjustable ball coupler. Is a fixed ball coupler acceptable?
- Need tongue load rating for 2500lbs – adjustable not important
Generator system with vented storage breaker panel 12V invertor 2- 110V outlets above work bench and 2110V outlets in rear corners of trailer and through wall shore power plug ALL outlets must have water covers – Is the generator to be included & installed with the trailer build? What size of generator is needed? Is the end user providing the generator? If the generator is not to be supplied by us, what are the dimensions of the generator door?
- The generator is to be included & installed with the trailer build and sits on trailer tongue
- 5KW generator with housing large enough to contain and access for maintenance
AC with heat on roof – Does the heat need to be ducted or just a heat strip in the A/C unit itself?
- Ducted is not necessary, however a second A/C would suffice on the rear half
65 Gallon water tank with fill intake door and vent with drain plug – Is this for a Fresh water dip tank for cleaning and rinsing gear? Does it need to be open at the top?
- This is fresh water as it is for rinsing gear and needs to have a pump and valve for using a hose
- Needs to have an opening to fill tank from exterior of trailer slide master for air compressor unit in rear DS -slides out roll-up door – What are the dimensions of the compressor so we can design the master compartment?
- roll-upside door 48"wide open by 66" Tall with a slide out tray supporting 1k lbs
File details come from the government source that posted it. Updated .