Solicitation Document - FA4877QA505A0001.pdf

SOLICITATION: RFQ FA4877-24-

QA505-A0001 –

79 RQS Parachute Gear

Amendment 0001 – Dated 22 August 2024

i. This is a solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.

ii. Solicitation FA4877-24-QA505 is issued as a Request for Quotation (RFQ)

iii. This solicitation document incorporates provisions and clauses of those in effect through Federal Acquisition Circular 2024-05 effective 22 May 2024, the DFARS provisions and clauses are those effective 25 April 2024, the DAFFARS provisions and clauses are those effective 07 July 2023.

iv. This procurement is being issued as a Total Small Business set aside. The North American Industry Classification

System Code is 314999 with a size standard of 550 Employees.

v. The right to make multiple or no award is reserved in the event it is advantageous to the Government to do so.

vi. Davis-Monthan Air Force Base intends to award a firm-fixed price contract for the following:

a. CLIN 0001 - PD Sabre3 150 (Quantity: 4 EA)

b. CLIN 0002 - PD Sabre3 170 (Quantity: 4 EA)

c. CLIN 0003 - PD Sabre3 190 (Quantity: 4 EA)

d. CLIN 0004 - PD Sabre3 Custom Logo (Quantity: 4 EA)

e. CLIN 0005 - PD Lightning 218 ZP Competition Version (Quantity: 2 EA)

f. CLIN 0006 - PD Lightning 193 ZP Competition Version (Quantity: 2 EA)

g. CLIN 0007 - PD Lightning Custom Logo (Quantity: 4 EA)

h. CLIN 0008 - PD Optimum 143-R (Quantity: 16 EA)

i. CLIN 0009 - UPT V3 Micron/M-Series H/C (Quantity: 16 EA)

j. CLIN 0010 - UPT Soft Reserve Ripcord Handle (Quantity: 16 EA)

k. CLIN 0011 - UPT Freefly Pud (Quantity: 16 EA)

l. CLIN 0012 - UPT Skyhook RSL (Quantity: 16 EA)

m. CLIN 0013 - UPT Student Vector SE Adjustable Harness (Quantity: 16 EA)

n. CLIN 0014 - UPT RW8 Rings (Quantity: 16 EA)

o. CLIN 0015 - UPT Custom Embroidery Ring Cover; Riser Cover; Back; Pad Handles (Quantity: 16 EA)

p. CLIN 0016 - UPT CUSTOM EMBROIDERY SIDE WALL; LEG PADS (Quantity: 16 EA)

q. CLIN 0017 - UPT Custom Logo Digitizing & Embroidery (Min Chg) (Quantity: 1 EA)

r. CLIN 0018 - UPT Hook Knife Aluminum (Quantity: 16 EA)

s. CLIN 0019 - UPT Variable Geometry Harness (Quantity: 16 EA)

t. CLIN 0020 - UPT 3D Spacer Foam Back/Leg Pads (Quantity: 16 EA)

u. CLIN 0021 – UPT 3D Spacer Foam Padded Stabilizers (Quantity: 16 EA)

v. CLIN 0022 - UPT V-Stow - Semi Stowless Deployment Bag (Quantity: 16 EA)

w. CLIN 0023 - UPT Freefly Mod (Quantity: 16 EA)

x. CLIN 0024 - UPT Louie Loop Risers (Quantity: 16 EA)

y. CLIN 0025 - Cypres Changeable 1-pin AAD (Quantity: 16 EA)

vii. The government will place an order with the offeror whose quote meets lowest price and technical acceptability. Technical acceptability is defined and referred to within this solicitation document as the offeror’s capability statement to meet the defined Performance Work Statement of the service.

viii. Important Dates/Times (All Times are Pacific Time)

a. All questions must be submitted by 19 August 2024 1:00 PM

b. All quotes must be submitted via email by 04 September 2024 1:00 PM

ix. It is the responsibility of the offeror to review the posting for any changes or amendments that may occur concerning this RFQ. It is the responsibility of the offeror to ensure all quotes and/or questions are submitted in a timely manner by specified due date.

x. Point of Contacts:

a. Primary: 2Lt Gavin Corcoran, gavin.corcoran.1@us.af.mil 520-228-5484

b. Alternate: SrA Erick Ramirez Millan, erick.ramirez_millan@us.af.mil 520-228-4967

xi. Attachments

a. Brand Name Justification Document

b. Provisions and Clauses

xii. 52.212-2 Evaluation-Commercial Products and Commercial Services (Nov 2021)

a. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

(i) technical capability of the service offered to meet the Government requirement;

(ii) price;

The lowest priced offer will be evaluated for technical acceptability and best value to the Government. If found technically acceptable and found to be the best value award will be made without further consideration. If found technically unacceptable the government will evaluate the next lowest offer for technical acceptability until award can be made to the lowest priced technically acceptable offeror. Past Performance will not be evaluated. Therefore, the offeror’s initial offer should contain the offeror’s best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.

b. Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

c. A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

xiii. 5352.201-9101 ACC Ombudsman Jul 2023

a. (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern.

b. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution.

Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions).

c. (c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, [Insert names, addresses, telephone numbers, facsimile numbers, and e-mail addresses of Center/MAJCOM/FLDCOM/DRU/DAFRCO ombudsman/ombudsmen]. Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/ FLDCOM/DRU ombudsman level, may be brought by the interested party for further consideration to the Department of the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431.

d. The ombudsman has no authority to render a decision that binds the agency.

e. Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the contracting officer.

(End of clause)