Questions and Answers - FA485524Q0033.docx
DOCX document 14 KB Posted
- Attached to
- Laser Engraver
- Solicitation number
- FA485524Q0033
About this file
This document contains Questions and Answers related to Solicitation FA485524Q0033 for a Laser Engraver to be used at Cannon AFB, New Mexico. The customer is open to various laser engraver brands that can meet their requirements, which include a work area of at least 24" x 24" with 9" material thickness, dimensions no larger than 41.25" x 32.81" x 38.04", and a Class 2 laser with 1mW CW maximum output between 600-700nm. The engraver must be capable of engraving metal tools and equipment, but marking is also acceptable. Rotary attachments are not required. The customer has not specified a particular make or model, but has referenced the Epilog Fusion Pro 24 Combo as an example. Higher laser power than 1mW is acceptable.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 1 - Combo.pdf | ||
| Attachment 2 - Provisions and Clauses.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Laser Engraver for Cannon AFB, NM Questions and Answers
Q: Do you have a specific engraver in mind you can you share, if so what is the make and model?
A: Our customer sent a request for an Epilog Fusion Pro 24 Combo, but they are open to any brand that can fit their needs.
Q: 1mW lasers are hard to find in an engraver. Are higher power offerings acceptable?
A: Higher power is acceptable.
Q: Is the space to be occupied by the engraver to be 41.25” Long by 32.81” wide by 38.04” high?
A: Yes, but they have plenty of space and can accommodate bigger sizes.
Q: Do you want to engrave metal or is just marking the metal acceptable? Marking uses a spray that reacts with the laser and bonds to the metal it doesn’t cut into the metal but is still permanent marking.
A: They would like to engrave their tools.
Q: What type of materials are intended to be engraved?
A: This will be used primarily to engrave labels on their metal tools.
Q: Are you looking for rotary attachments as well?
A: Our customer did not specify the need of a rotary attachment.
File details come from the government source that posted it. Updated .