Attachment 2 - Salient Characteristics.pdf
PDF 330 KB Posted
- Attached to
- SOMXG Metal Storage Rack Federal contract opportunity
- Solicitation number
- FA485524Q0020
About this file
This document is an attachment outlining the salient characteristics for a metal storage rack required under Solicitation Number FA485524Q0020 issued by the Department of the Air Force Special Operations Command.
The required storage rack must be a brand name item, the Athena Manufacturing Metal Storage Rack - Part Number BML 48-96-25-2, or an equal item that meets the following salient characteristics: steel frame construction approximately 122" wide x 70" high x 36" deep, ability to be disassembled, 25 independent vertical sliding shelves capable of holding 750 lbs each, 2" wide x 130" deep x 66" high shelf base including wheels, and a 1-year warranty. Vendors must submit all questions by 15 May 2024, 1200 Mountain Daylight Time.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Metal Storage Rack - Combo.pdf | ||
| Attachment 1 - Provisions and Clauses.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
- Brand name item requested: Athena Manufacturing Metal Storage Rack
- Part Number BML 48-96-25-2
- An equal time must meet the salient characteristics listed below:
- The frame will be made of steel with a width of approximately 122 inches by a height of approximately 70 inches by approximately 36 inches and be able to support 25 ver�cal standing slides that can be pulled in and out.
- Must have the ability to be disassembled so that it can be moved if needed.
- There will be 25 ver�cal standing slide that must support having sheets of metal being placed on them with each being able to hold 750 pounds.
- The slides must operate independently, roll freely under a load, and be operated manually by an individual with a handle on the end to pull and push.
- The slides must have a base that is 2 inches wide with an approximate depth of 130 inches by a height of approximately 66 inches including wheels as the sheets of metal being stored on this can range in size not exceeding 48 inches by 96 inches.
- The metal being stored on the slide at a slight angle and must hold the metal in place when it is in opera�on but be accessible for individuals to easily move the metal on and off the slide from a single side of the slide.
- Must come with an owner’s manual detailing required maintenance and assembly procedures.
- Must come with a 1-year warranty on materials and workmanship.
File details come from the government source that posted it. Updated .