Solicitation Amendment FA480924Q00970001 SF 30.pdf

R

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

16C. DATE SIGNED

Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBE

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

Description/Specifications/Statement of Work

Miscellaneous text in this section has been modified to:

Brand Name or Equal Line items

All line items are Brand Name or Equal. Characteristics listed are the required characteristics to determine a product of a different brand to be "Equal".

CLIN 0001 Part Number 5513A UPC 53480:

Brand name 3M Worldwide

Or equal characteristics:

Splice Kit provides for quick and easy installation, excellent for cable size transitions, good for high and low temperature performance. Has high ampacity shield (faults rated for 15,000 Amps for 15 cycles, neutral current rated for 350 Amps). Cable insulation O.D. range Inches (mm) 0.64 -1.01 (16,3 -25,7). Conductor size range 2-4/0 AWG.

Kit contains:

- 1 cold shrink silicone rubber splice body

- 2 cold shrink adapter tubes

- 1 cold shrink jacketing tube

- 2 red compound tubes P55/R

- 6 mastic sealing strips 2230

- 2 rubber mastic tape 2228 rolls

- 1 cable cleaning pad CC-3

- 1 cable preparation template

- 1 shielding sleeve

- 1 ground strap

- 5 constant force spring ground connectors

- 2 copper tape strips

- 1 instruction booklet

CLIN 0002 Part Number QCI-2-250 UPC 58537:

Or equal characteristics:

Shear bolt connector compatible with aluminum and copper conductors. Supports wire sizes 2 AWG-250 KCMIL. Overall length of 4.41in. Voltage rating of 35 kV. Inside diameter 0.64in. Outside diameter 1.1in. Overall length 4.41in. Compatible with CLIN 0001 Kit.

FA480924Q00970001

CLIN 0003 Part Number 7692-S-4 UPC 42211:

Or equal characteristics:

Cold Shrink Termination Kit with cable insulation O.D. range of .064-1.08

Kit contains:

- 3 High-K, tracking resistant, silicone rubber skirted terminations

- 3 constant force springs

- 3 pre-formed ground braids

- Copper foil shielding tape 1181 strips, 1/2" x 10"

- 3 tracking resistant silicone rubber skirt assemblies

- 6-strips mastic strip 2230

- Cleaning cable preparation

- Instruction sheet

Other Kit requirements

- Conforms to IEEE Standard 48 class 1requirements for 5, 8, 15, 25/28 and 35 kV terminations. One-piece, and two-piece inverted skirted design that allows for various cable sizes.

- Easy installation where termination is placed over prepared cable and core is unwound to shrink into place (no force fit)

- High dielectric constant material to minimize surface stress and uniformly distribute electrical field over the entire surface of the insulator

- Silicone rubber insulators, DPDM stress control tubes, stress controlling compound & environmental sealing that are compatible w/ all common solid dielectric insulations.

CLIN 0004 Part Number SC0020 UPC 14671:

Or equal characteristics:

Stem connector used to connect cable to an overhead line. Stem connector measures 2 1/2" (63,5 mm) when cable insulation is removed from conductor end. Conductor material is Tin plated aluminum. Can be used on copper or aluminum cable conductors. The stem "pin" must be plated copper. Rated up to35 KV.

Conductor size - AWG & kcmil

Stranded/Compressed: 2/0

Compact: 3/0

Solid: 3/0

CLIN 0005 Part Number OMNMVA32/001-COM UPC 00000:

Brand name Omni Cable LLC

Or equal characteristics:

Medium voltage cable

EPR Insulation - PVC Jacket

133% Insulation level

2/0 Aluminum conductor, Class B stranding

Extruded Insulation shield - Thermoset semi-conducting polymeric layer free stripping from insulation

Metallic Shield: 5 mils annealed copper tape with an overlap of 25%

Suitable for use in wet of dry locations in accordance with the National Electric Code (NEC), for use in aerial, direct build, conduit, open tray, and underground duct installations. For use in direct burial if installed in a system with a ground conductor that is in close proximity, and conforms with

NEC 250.4(A)(5)

CLIN 0006 Part Number WCUTHHN1/0GN UPC 75311:

Brand name Wire Copper

Or equal characteristics:

Wire, Stranded, 1/0 AWG, THHN Insulation thickness 0.05 In., 1 Conductor, Copper, 600 Volts, green. Amperage rating 170 A. Voltage rating:

600V. Jacket material is Nylon

CLIN 0007 Part Number 31-601 UPC 31601:

Brand name Ideal Industries, Inc.

Or equal characteristics:

1 Pound duct seal, dark gray putty. Specific gravity: 1.65. Base content: Butyl rubber composite.

CLIN 0008 Part Number 31-371 UPC 31371:

Brand name Ideal Industries, Inc.

1 gallon bucket of wire pulling lubricant, water based, non-flammable, operating temp: 28 degrees to 180 degrees F. 0.98 Specific Gravity.

CLIN 0009 Part Number KSU26 UPC 03660:

Brand name Burndy

Or equal characteristics:

Split bolt connector, Tin plated, UL 486A Listed, for all combinations of copper, finish - tin plated, material - high conductivity copper alloy, conductor range: tap/secondary- 7/16 IN - 8 AWG. Main/primary- 6 (6-1) - 2/0 AWG.

CLIN 0010 Part Number KSU20 UPC 03525:

Brand name Burndy

Universal Split bolt connector, #10 to 4 AWG Conductor, 1.05in L, Width .48 in. Copper. Torque 165 in-lb.

CLIN 0011 Part Number 35284 UPC 35284:

Brand name Greenlee

600FT of Double-braided inner core with an extra double-braided outer jacket for added strength and less stretch, rot and mildew resistant, Factory spliced eyes at both ends, average breaking strength 16000.000 LB, material - Nylon/Polyester, maximum rated capacity 4000.000 LB, rope diameter

9/16 IN (14.300 MM)

List of Attachments

The following attachments were added:

Attachment 1 - Bid Schedule rev 19 Aug 24

The following attachments were deleted:

Attachment 1 -Bid Schedule

1570 WRIGHT BROTHERS AVE BLDG 2903, CP 919 722 5417

SEYMOUR JOHNSON AFB, NC 27531-2456

UNITED STATES

KELLY CODDINGTON, Email: kelly.coddington@us.af.mil Telephone: 722-1588 AdminBy:

SCD: PAS: