SOO Equip Requirement for Jet A Absorbent Centrifuge.pdf

Statement of Work

Equipment Requirements for Jet-A Absorbent Centrifuge

1. Vendor shall provide a centrifuge to for use to separate and reclaim Jet-A aviation fuel and various petroleum products from used absorbent material (e.g. pads, booms, etc.)

2. Centrifuge must meet the following minimum specifications as follows:

a. Unit must be explosion proof, including ensuring that all wiring/electrical components are securely housed in casing constructed of material that prevents release of sparks; all sparks paths must be adequately guarded.

b. Drive unit must be grounded to the base assembly to prevent static charges that may generate from spinning basket/container.

c. 30” diameter x 16” high basket with grid liner with minimum dry weight capacity of 100 lbs

d. Explosion proof collection sump and pump to remove liquid

e. Self balancing basket with automatic out of balance shutdown

f. Must be skid mount with leveling pads for mobility

g. Pneumatic safety interlock system; locks lid during operation and will not start unless lid is closed

h. Pneumatic adjustable timer 0-10 minutes

i. 208 volt/ 3 phase input, 80 psi requirement

j. Lid sight glass

k. Liquid collection tank and pump

l. Drain discharge modification