SOW for 09-Q-0332.doc

STATEMENT OF WORK

1. Scope: The work covered by the provisions of this contract consists of furnishing all labor, tools, equipment and supplies necessary to replace 6 tires removed from a John Deere Excavator. The Seymour-Johnson Air Force Base Contracting Office reserves the right to not accept the contractors estimate and stop at this point with no expense to the Government.

a. Replacement costs will be coordinated with an authorized Government representative at Seymour Johnson Air Force Base, 4th Contracting Office.

b. Upon notification to the vendor that authorization is granted to proceed, Air Force Vehicle Maintenance personnel will remove 6 tires from the Excavator. The vendor will pick up 6 each tires at the Vehicle Maintenance compound, 1355 Jabara Avenue, Bldg 3100 and transport tires to the desired location for replacement. A government representative will be notified upon completion of work and the expected delivery date to return property at Seymour Johnson Air Force Base.

2. Materials: Replacement tires will be of high quality and comply with current industrial industry tire standards. The vendor or repair facility will provide replacement tires that meet or exceed the original equipment manufacturers tire size specification. Replacement tires can be supplied from an original equipment tire manufacturer or from aftermarket suppliers. All tires will be foam filled to comply with vehicle requirements for rigidity.

a. Vehicle Year, Mfr: 1990 John Deere Model: JD 693

b. Type: 6 wheeled Bucket Excavator

c. Tire size: 18.00 - 19.50, Lug Tire Ply: 16

e. Type Tire: Tubeless, Multi Purpose, MPT-02, Non Highway Tread Design

3. Workmanship: all workmanship will comply with industry standard trade practices necessary to ensure quality replacement materials. The contractor shall ensure workmanship is performed by qualified personnel who are familiar with tire replacement service practices. The following is a list of the minimum requirements that will be accomplished in addition to any vendor requirements during the tire replacement process:

a. Remove old tire from rim assembly

b. Thoroughly wash, clean and check all wheel rims and correct minor defects before reassembly

c. Install new tires onto wheel assembly

d. Inflate tires to check for leaks and proper air pressure

e. If no leaks are found, deflate tire

f. Fill inside of tire carcass with foam material to ensure solid case structure

4. Warranty: The vendor will provide the industry standard product warranty for new tires to cover defects in material or workmanship for a period of not less than 30 days.