STATEMENT OF WORK 702 for carpet squares.pdf

STATEMENT OF WORK

Furnish all labor, tools, equipment, material, and transportation to remove and replace approximately 3375 sq. yards of carpet tile and 4000 linear ft.

of carpet covebase, in building 702. The Contractor is responsible for field measuring of carpet to insure exact amount of carpet and covebase required to complete this installation. The measurements given are an estimate.

Carpet to be purchased and installed shall be GSA product, 100% DYNEX

SD/BCF type 6,6 solution dyed nylon, 128.2 oz per sq. yd. total weight, 1/13 gauge, ER3 Backing, style Explorer , color 25007 Nile Brown, as manufactured by Collins & Aikman floor covering.

The contractor is responsible for the purchase, binding and installation of carpet cove base and adhesive or purchase and installation of Collins &

Aikman carpet covebase to match carpet Nile Brown and any adhesive that will need to be applied.

The existing floor surface is suitable for installation but if the floor needs filling of holes or cracks the contractor will be responsible for making the floor carpet ready. Contractor will furnish all cement, tape, thresholds and cap down moldings, and will be allowed to work from 0730 to 1630 Monday through Friday with special security requirements. The requirements will be but not limited to as follows: all worker will have photo identification on them at all times and will be escorted by an appointed person from the facility at all times and clean up as necessary each evening.

Carpet to be installed in accordance with the manufacturer’s instructions.

The contractor will furnish all adhesive and primer as recommended by carpet manufacture. Contractor shall be responsible for preparation (primer) of floor surfaces as necessary to receive carpet. All surfaces to be free of voids and protrusions. Installed carpet shall be smooth, uniform, secure, and installed in a professional manner. Patterned goods will be accurately matched. Fit cutouts such as doors, jambs, columns, steps, landings, and ducts neatly and securely.

Contractor shall trim and butt edges together to form seams. Extra attention is to be observed while butting seams together. Contractor is to provide at lease a one year warranty against fraying, raveling, separating, buckling and on his workmanship. The Collins & Aikman carpet has a 15 year warranty.

The contractor is responsible of the lifting of furniture and removing the old carpet and the installation of new carpet tiles. The contractor that lifts the furniture has to be a Trendway approved contractor. The contractor is responsible for having a Trendway representative to inspect the furniture upon completion of carpet installation to turn the furniture warranty back over to Trendway.

The contractor shall remove and dispose of all debris off base and in accordance with environmental specifications, each day and after carpet installation is completed.

Inspection of the completed work will be made by the Facility

Manager/Inspector and 20 th

CES Quality Assurance Evaluator. The Facility

Manager/Inspector (TSgt Koonce 895-4078) is responsible to notify the evaluator (Nancy Mallard 895-9581) at least two days before start of work.

The contractor must notify the Facility Manager and the Evaluator at least three working week prior to start of work and upon completion.