1. CDDAR Trailer Specifications.docx
DOCX document 30 KB Posted
- Attached to
- CDDAR Trailer Federal contract opportunity
- Solicitation number
- FA466124Q0048
About this file
This document contains the specifications for an Aircraft Crash Recover Bumper Pull Trailer required under Solicitation FA466124Q0048 issued by the Department of the Air Force Global Strike Command. The trailer must meet the salient characteristics detailed in the document, which include requirements for the frame, exterior, axles, brakes, tires, wheels, interior, doors, and electrical systems. The contractor will be responsible for delivering the fully functional trailer to Dyess AFB. The solicitation provides options for additional features such as increased trailer height, a generator, and air conditioning. The contractor shall provide manufacturer warranties covering defects and damage for at least one year.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Questions and Answers.pdf | ||
| RFQ COMBO CDDAR Truck.rtf | RTF text file | |
| 3. FA466124Q0048 FAR 52.212-5.pdf | ||
| 2. FA466124Q0048 FAR Provisions and Clauses.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MEMORANDUM FOR INTERESTED VENDORS
FROM: 7 CONS/PKB
SUBJECT: Specifications for Aircraft Crash Recover Bumper Pull Trailer
1. The Contractor shall provide one Aircraft Crash Recover Bumper Pull Trailer. Equal items must meet the salient characteristics of the items listed in the table below.
| Item |
| Description |
| Quantity |
| Triple 6,000 lb. Torsion Axles |
| 3/16” Gauge Mains |
5” Crossmembers 60” Tongue with 1/4” Wall Drawbars 25K bolt on Coupler
| Bumper Pull Standard Features |
| Frame & Exterior |
LED Clearance Lights LED Taillights LED License Plate Light Painted/Z-Tech Undercoated Frame 24” Stone guard 2”x6” Steel Tube Frame 1” x1-1/2” 16” Centers Walls, Ceiling & Floor 48” Beavertail Aluminum Roof 1 Vent Wired for Air Conditioning Polished Cast Aluminum Corners & Stainless-Steel Cap .040” Screwless Exterior Metal Brite Anodized Rear Hoop
| Axles & Brakes |
| E-Z Lube Torsion Axles |
All Wheel Electric Brakes
Tires & Wheels
Radial Tires Aluminum Wheels
| Interior |
| Approximate 6’6” Interior Heights |
Approximate Interior Width: 96” Wal to Wall Approximate Distance Between Wheel Wells: 82” ¾” Plywood Flooring with Moisture Barrier TPO Floor Covering A.T.P. on Ramp Door with 16” Wide Aluminum Flap Interior wheel Wells covered with A.T.P.
White Vinyl Ceiling with Insulation Screwless .030” Aluminum Interior Walls (White) L-Shape Workbench, 16” L-Shape Overhead & 24” Closet (White)
| Doors |
| 48” Side Door with Flush Lock and Deadbolt – Piano Hinge |
Side Door Construction: Aluminum Tube Rear Ramp Door with spring assist and exterior recessed handle Latch White Aluminum Rear Spring Cover
| Electrical |
| (4) 38” LED Panel Lights with 1 Switch |
(2) Destin LED Scene Lights with 1 Switch
(3) Interior 110 Volt Receptacles
(1) 110 V GFI Receptacle 30 Amp Load Center with lifeline 45 Amp Smart Charger
| Add On Options |
| 18” Extra Height Platinum 36” Tag |
Heavy Duty Skid Wheels (Pair)
60” Triple Tube Tongue
15,000 BTU Air Conditioner with Heat Strip and Remote Thermostat
12 KW Commercial Diesel Generator (100 Amps) 12 Volt Battery Generator Compartment Vented Generator Door (top Hinge)
25 Gallon in-Frame Fuel Tank for Generator for Diesel Fuel
Insulation for Side Walls (18” Extra) PMF
Hydraulic Jack for Tag – 8,000 lb. – Battery Powered
12 Volt Battery and Box
| Recessed Floor E-Track (Per Ft) |
| 40 |
| E-Track: Surface Mounted (Per ft) |
| 40 |
| Compressed Air Lines: 1 inlet with 3 Quick Disconnects |
| 1 |
| 22.5 Degree Down Start Angle 1 per Axle |
| 3 |
| 3” Pintle Eye Hitch |
| 1 |
| E-Track: Surface Mounted (Per Ft.) |
| 60 |
(White) 24” Wide Closet
20 Amp GFI Receptacle
Fold Down Laminate Only, per foot
| Warranty |
| 3 Year Warranty |
2. The Articulated Arm Portable CMM shall include the operator’s manual and any/all accessories needed for maintenance. The contractor shall provide any manufacturer or commercial warranties to cover defects and damage for no less than one year. The contractor will also verify that all products are working properly as intended by the manufacturer with no cost to the government.
3. The Contractor will be responsible for delivery of the equipment which can be done Monday through Friday from 8:00 A.M. to 3:00 P.M. Delivery of the Articulated Arm Portable CMM will be to the below address:
ATTN: MSgt Kevin Parnell 933 3rd St Bldg 8130 Dyess AFB TX, 79607
File details come from the government source that posted it. Updated .