2. Questions and Answers Final.pdf

PDF 119 KB Posted

Attached to
High Density Storage Shelf
Solicitation number
FA466123-Q-0042
Issued by

View the file

Other files

File Type Posted
RFQ Attachment 1 Provisions and Clauses 23-Q-0042.pdf PDF
RFQ Attachment 2 HDSS - Salient Characteristics.pdf PDF
RFQ HDSS 23-Q-0042.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

High Density Storage Shelves.

DYESS AFB, TEXAS

RFQ FA4661-23-Q-0042 // QUESTIONS & ANSWERS

Question 1. Is there a wall on the right side of the 36" carriage?

Answer: There are no walls around this shelving unit. It will be in the middle of a large bay.

Question 2. Item 0002 - where is rolldown doors located?

Answer: The “End Cap” refers to the outside of the three adjacent “A – shelves” and ladder storage. The ladder storage should be a separated compartment access than the shelves.

The Roll Doors are not adjacent to the handles on the mobile units and the doors would face out.

The second location is the end cap for four (4) adjacent C shelves. One solid unit is acceptable.

Question 3. Is a back required on the units with the roll down doors?

Answer: Only the Ladder storage compartment, Shelf A, units will have a “wall” separation. Compartments labeled A1 will remain open faced shelves, opposite to the roll door.

Question 4. Item 0003, 0004, 0005 - Which shelves need dividers, none shown on drawings?

Answer: Item 3. Four (4) rows of double sided “B” shelves will include at minimum a brace between shelves. Item 4. One (1) combination of B/C shelf and Three (3) C shelves any shelf, will include a full back plate located to distinguish a double face units.

Item 4. Will include a full back plate.

Question 5. Are standard steel end panels acceptable or are decorative laminate end panels required?

Answer: Steel is fine.

Question 6. Is any type of floor covering required for the plywood subfloor between the rails?

Answer: No, not at this time.

Question 7. Is the system located on the first floor?

Answer: Yes

Question 8. Is there a loading dock or forklift available?

Answer: There is not a loading dock. There is a roll up door and it is accessible by vehicle. A forklift will not be available, you will need to supply the means to place it in the respectful location.

Question 9. Are the movable carriages supposed to have dual entry operation?

Answer: Yes, handles need to be on both ends.

File details come from the government source that posted it. Updated .