Potable_Water_Service_Specification.pdf

AFPAM32-10144 8 MARCH 2016 41

Attachment 4

POTABLE WATER SERVICE SPECIFICATIONS FORMAT

Use as Section C in utility service contracts. Use a separate specification sheet (A-1, A-2, A-3) for each point of delivery.

Section C - Description/Specifications/Work Statement

POTABLE WATER SERVICE SPECIFICATIONS _____, dated ____________.

(a) SPECIFIC PREMISES TO BE SERVED: ____________________________.

(b) ESTIMATED SERVICE:

Estimated daily maximum demand: __________________ KGAL. (K = 1,000)

Estimated annual consumption: _______________________________ KGAL. (The government is neither obligated to use, nor is it restricted to, the above estimate.)

(c) POINT OF DELIVERY. The point of delivery of water is_________________________(see attached map or one-line diagram).

(d) DESCRIPTION OF WATER SERVICE. The contractor shall have _________ gallons per minute of water continuously available at the point of delivery at a pressure of not less than _________ pounds per square inch gauge.

(e) QUALITY OF WATER. The contractor shall supply clear, potable water safe for human consumption IAW current Federal, state, and local standards.

(f) METERING. Water shall be measured by ______meter(s).

(g) SIZE OF CONTRACTOR'S PIPELINE TO POINT OF DELIVERY: _______ inches diameter.

(h) ALTERATIONS AND ADDITIONS.

(Show the rate schedule that applies to this specification sheet.)