SOW.pdf

JFSD201803

Manufacture Ramps for Hangar 603

21 August 2018

1. GENERAL: The contractor shall provide all materials, plans, labor, and equipment necessary to manufacture and deliver the following items.

2. PRINCIPAL FEATURES: The work to be performed includes, but is not limited to, the following:

2.1. As detailed on accompanying drawing sheets 3 and 4, construct ramps and inserts for

Grand Forks AFB Hangar 603 door center rail and five feet ramp sections and inserts on the second rail.

2.2. Ramps shall be constructed from ½-inch thick x 15” wide steel plate. Insert shall be constructed from ½-inch thick x 11” wide steel plate. See drawings for additional information. All steel shall meet American Society for Testing and Materials (ASTM) A36 and American Iron and Steel Institute (AISI) A-36, commonly known as hot rolled A36 Steel Plate.

2.3. The ramps, which will be installed by USAF personnel, will be held in place by recessed Hilti or Redhead anchor bolts using mounting holes as shown on drawings.

2.4. Contractor shall deliver finished products to Grand Forks Air Force Base within two calendar weeks of contract award.

3. SPECIFICATIONS: All work shall be accomplished in accordance with Unified Facilities

Criteria (UFC) 1-200-01, DoD Building Code (General Building Requirements), Unified Facilities Guide Specifications (UFGS), Engineering Technical Letters, and any manufacturer’s specification associated with materials and supplies. In the event of a conflict between any of the specifications or codes, the most stringent standard will apply.