Tab15-SOW.pdf

STATEMENT OF WORK

for

Purchase of High Voltage Electrical Distribution Units

Luke AFB, AZ Well Project

General Scope:

1. This Statement of Work (SOW) is to purchase two (2) VanTran 15 kV, 225 kVA transformers and one (1) S&C Pad Mounted 15 kV PME-9 Switch Gear along with the standard equipment for each. The supplier will make available and deliver all necessary materials stated on this Bill of Materials (BOM) that meet all required specifications outlined in this SOW.

2. The specifics for each item is outlined in the table below titled “BOM”. The manufacturer of each item along with the item’s catalog number will be considered in quote technical acceptance to ensure these high voltage electrical distribution units conform to Luke Air Force Base’s existing infrastructure and standards. Additionally, unit manufacturer specifics are required to match since this purchase is a backfill of units that the 56th Civil Engineer Squadron provided that we are required to replace.

3. Bill of Materials (BOM):

LN Item QTY U/M Description

1.

Transformer, VanTran 15 kV, 225 kVA, 12470 V Delta Primary, 208/120 V Secondary with standard equipment

(Catalog # 1203163)

1 EA

The transformer must be a Delta/Wye loop feed transformer with the following:

- Primary voltage: 12470 V

- Secondary voltage: 208Y/120 V

- (3) phased

- Oil filled

- (4) position “break before make” selector switch

- (3) Phased bayonet fused with isolation link

- (5) position tap charger +/- 2.5%

- (6) installed 15 kV 200 amp bushing well inserts

- and standard equipment

- Color: Buckskin Tan, Muncel 10YR-6.0/3.0 Gloss 60 +/- 3, 60 degree on gloss meter

2.

Transformer, VanTran 15 kV, 225 kVA, 12470 V Delta Primary, 277/480 V Secondary with standard equipment

(Catalog # 1203163)

1 EA

The transformer must be a Delta/Wye loop feed transformer with the following:

- Primary voltage: 12470 V

- Secondary voltage: 277Y/480 V

- (3) phased

- Oil filled

- (4) position “break before make” selector switch

- (3) Phased bayonet fused with isolation link

- (5) position tap charger +/- 2.5%

- (6) installed 15 kV 200 amp bushing well inserts

- and standard equipment

- Color: Buckskin Tan, Muncel 10YR-6.0/3.0 Gloss 60 +/- 3, 60 degree on gloss meter

3.

Switch Gear, Pad Mounted S&C Manual PME-9, 15kV with (6) fittings and (6) 25 amp SM-20 fuses

(Catalog # 65152R1-A5)

1 EA

The switch gear must be a pad mounted S&C PME-9 with the following:

- Size: 15kV

- 95 BIL

- 200E,

- SME-20 fuse type

- (6) 25 amp SM-20 fuses

- (6) 3093 end fittings

- Color: Buckskin Tan

4. Delivery: Delivery of the items outlined in this SOW will be to Luke Air Force Base, Arizona.

The address for the building all items should be delivered to is below.

Supply Warehouse Attn: Electric Shop 14020 Gillespie Dr.

Bldg 325 Luke Air Force Base, AZ 85309