Statement_of_Work_-Campers.pdf

Design/Detail Statement of Work

Low Profile Camper

1. General: 3 Campers for sustainment/improve current fleet

2. Required Specifications: Low Profile Campers must meet the following specifications:

2.1. Physical Characteristics

2.1.1. Must be able to fit and able to be supported in a F250, F350, Chevy 2500, 3500 or Dodge

2500, 3500 Long Bed

2.1.2. Fiberglass outer shell: With 1/4 inch Wafer Board Backing

2.1.3. Insulated enough to withstand ‐30 to 110 degrees

2.1.3. jack system: Crank Manual

2.1.4. Overall footprint measurements: Length x Height x Width: 96'X72"X96" (can’t go over the truck cab)

2.1.5. Windows on each side: 18x36"

2.1.6. Outside storage for propane: 5 Gallon Bottle

2.1.7. Battery storage with batteries

2.1.8. Must be able to Charge Batteries while driving

2.1.9. Slanted Front Wall

2.1.10. Propane Back right side of camper

2.1.11. Window slide in door

2.2. Inside Characteristics:

2.2.1. Two beds on left and right side of camper (Width [W] x Length [L]) 30" W x 76"L

2.2.2. Adequate storage w/ Gun Storage

2.2.3. Propane heater: 16000 BTU Forced Air. Atwood

2.2.4. Refrigerator: Norcold 1.7 CU FT

2.2.5. Microwave: 1000 watt

2.2.6. A/C unit: 13,500 Domestic Bottom Discharge

2.2.7. Power outlets: 2

2.2.8. Power inlet for 120V: 30 AMP

2.2.9 Must have fire and carbon dioxide detectors

2.3 Warranty/maintenance

2.1.4. Minimum 2 Year Front To Back

2.1.5. Able to provide maintenance under warranty within 48 hours