Questions_and_Answers.pdf

**Note – This attachment does not become part of the resultant contract**

Pre-Proposal Offeror Questions and Government Responses Repair Base Roads and Parking Areas

FA4528-17-R-0015

14 June 2017

1. Q: Plan sheets CD-100 and CP-100 show the width of the street varying. Is there a set width that we are supposed to mill and overlay?

A: See revised drawings.

2. Q: Plan Sheet CD-100 - Please clarify what is required in the patch repair area.

A: See revised drawings and CD-101.

3. Q: Plan sheet CD-104 does not show any demolition on the North sidewalk, but plans sheet CP-104 shows new concrete. Please clarify.

A: See revised drawings.

4. Q: Plan sheet CP-102 - Areas around buildings 445 and 443 show the 3 code for new concrete, but no shading and no removals were shown on CD-102. Please clarify.

A: See revised drawings.

5. Q: Plan sheet CP-103 - New concrete curb & gutter is not drawn in.

A: See revised drawings.

6. Q: Please clarify what is to be done in areas where the existing pavement is badly broken up and will not support the milling or new pavements

A: See revised drawings note 6.

7. Q: Spec. section 32 11 23 - There appears to be a typo in section 3.5.7 with the weight of the roller to be used for proof rolling.

A: Correct 3.5.7 is only required for Airfield Pavement and would not apply to this project.

8. Q: Spec section 01 32 01.00 10 - Will afull CPM schedule be required?

A: Yes.

9. Q: Spec section 32 01 16.17 - It will not be possible to maintain 1-1/4" maximum size of the milled material. Will we be required to further process the milled material to meet the maximum size?

A: Yes if milling machinery is unsuitable to provide the desired size this requirement can be waived.