C-1_Performance Work Statement.docx

PERFORMANCE WORK STATEMENT

FOR

INSPECTION / MAINTENANCE

OF

STAND-ALONE FIRE SUPPRESSION SYSTEMS

AT

JOINT BASE MCGUIRE-DIX-LAKEHURST

Joint Base McGuire-Dix-Lakehurst Revision 2 21 Dec 2023

PERFORMANCE WORK STATEMENT (PWS)

FOR

INSPECTION / MAINTENANCE, REPAIR, TESTING AND CERTIFICATION

OF

STAND-ALONE FIRE SUPPRESSION SYSTEMS

AT

JOINT BASE MCGUIRE-DIX-LAKEHURST, NEW JERSEY

1.0. DESCRIPTION OF SERVICES. The contractor shall provide all supervision, tools, supplies, equipment, and labor necessary for the inspection / maintenance, repair, testing and certification of wet chemical (Ansul) range hood suppression systems, dry chemical systems, clean agent systems (FM 200), and carbon dioxide (CO2) systems listed on Appendix A at Joint Base McGuire-Dix-Lakehurst (JB MDL).

1.1. BASIC SERVICES. The contractor shall provide all supervision, tools, supplies, equipment, and labor necessary for the inspection / maintenance, repair, testing and certification of fire suppression systems In Accordance With (IAW) the latest revision of NFPA96, and IAW the manufacturer’s recommendations as well as warranty requirements. The work shall be coordinated with the Contracting Officer Representative (COR) to include the Electrical Shop and Fire Department of each base. The contractor shall be responsible for the clean-up of the area upon completion of all work. The contractor shall provide written reports for all inspections / maintenance, repairs, testing and certifications. All work shall be in strict accordance with National Fire Protection Association (NFPA), Air Force Occupational and Environmental Safety and Health Standards (AFOSHSTD), American National Standards Institute (ANSI), American Society of Mechanical Engineers (ASME), the American Society of Safety Engineers (ASSE), Occupational Safety and Health Administration (OSHA), Automatic Fire Alarm Association (AFAA), Fire Suppression Systems Association (FSSA), and US Corps of Army Engineer Safety & Health Requirements Manual (EM 385-1-1).

1.2. INSPECTION / MAINTENANCE. The contractor shall perform semi-annual inspections / maintenance of the wet chemicals (ANSUL) range hood suppressions systems and dry chemical systems in preparation for the testing and certification. The clean agent systems (FM 200) and the carbon dioxide (CO2) systems shall be inspected and maintained on an annual basis. The contractor shall provide the government a two (2) week notice prior to the inspection / maintenance process. The scope of work includes but not limited to: charging bottles, cartridges, nozzles, nozzle caps, gas / electric shut off assemblies, fusible links, hood filters, chemical extinguishing agents, interconnection with facilities’ fire alarm system, pull station devices and any other associated equipment. The contractor shall provide a written report of any deficiencies found during the inspection / maintenance process to the COR prior to leaving the worksite.

1.3. REPAIRS. The contractor shall repair all mechanical, electrical, control, and safety deficiencies as a result of the preventative maintenance cycle and service calls.

1.3.1. MINOR REPAIRS. The contractor shall repair the fire suppression systems at the contractors’ expense if the material cost is less than $100.00 per system. The contractor shall absorb the labor expenditure. The contractor shall ensure all minor repair work commences within one (1) business day. The contractor shall ensure that all repair work is completed within one (1) business day of its commencement. However, the contractor is encouraged to keep equipment downtime to a minimum. The contractor shall provide a written report within two (2) business days of completion to include but not limited to; Mechanical / electrical / control / safety deficiencies found, actual parts replaced, parts cost, and man hours per repair. A copy of the repair report shall be provided to the COR.

1.3.2. MAJOR REPAIRS. If the repair work is between $100.00 and $2,500.00 in total costs, the contractor shall provide a written repair cost estimate to the COR within two (2) business days of finding the deficiency requesting authorization to proceed. If the contractor is not able to complete the repairs due to the repairs being out of their ability to perform the work, then the CO and COR will need to be notified within three (3) days of repair notice. The written repair cost estimate shall include, at a minimum, the following: the estimated cost of material, the labor hours needed to complete repairs, and the projected time the equipment will be out of service. The contractor shall be financially compensated for material and labor costs only if COR authorization is granted. At no time shall work in excess of $100.00 be completed without COR approval. If the work exceeds $2,500.00 in total costs, the contractor shall provide a written repair cost estimate directly to the Contracting Officer (CO) and to the COR within two (2) business days of finding the deficiency. The written repair cost estimate shall include, at a minimum, the following: the estimated cost of the material, the labor hours needed to complete the repairs, and the projected time the equipment will be out of service. The contractor shall be financially compensated for the material and labor costs only if CO authorization is granted. At no time shall work in excess of $2,500.00 be completed without CO approval. There’s no maximum financial threshold for major repairs under this contract. The contractor shall ensure all major repair work commences within three (3) days of COR or CO approval. The contractor shall ensure that all repair work is completed within seven (7) days of its commencement unless otherwise authorized; however, the contractor is encouraged to keep equipment downtime to a minimum. The contractor shall provide a written repair completion report to include but not limited to: mechanical / electrical deficiencies found, actual parts replaced, parts cost, and actual man hours per repair. A copy of the repair report shall be provided to the COR.

1.4. TESTING. All fire suppression systems shall be tested in accordance with all applicable standards and regulations prior to certification. The wet chemical (Ansul) range hood suppression systems and dry chemical systems shall be tested semi-annually. The clean agent systems (FM 200) and the carbon dioxide (CO2) systems shall be tested annually. The contractor shall conduct the testing in the presence of the COR. The contractor and COR shall ensure that the Fire Department is notified that testing is being accomplished. The contractor shall be responsible for resetting the facilities’ main fire panel if applicable. In the event that a necessary repair is found as a result of the testing process, the contractor shall be responsible to follow Paragraph 1.3. Repairs - in order to correct the deficiency.

1.5. CERTIFICATION. The contractor shall certify that the fire suppression systems passed all requirements as delineated in and accordance with NFPA, AFOSHSTD, ANSI, ASME, ASSE, OSHA, AFAA, FSSA, and EM 385-1-1 requirements. The wet chemical (Ansul) range hood suppression systems and dry chemical systems shall be tested semi-annually. The clean agent systems (FM 200) and the carbon dioxide (CO2) systems shall be tested annually. The contractor shall physically attach a waterproof / grease proof certification label or tag with legible print and with the pertinent information / data to each fire suppression system.

1.6. SERVICE CALLS. In the event that any fire suppression system fails, malfunctions or discharges for any reason, the contractor shall respond to a service call within 1 business day upon notification by the COR or CO. The contractor shall inspect, repair, test and recertify the repaired fire suppression system in accordance with all established procedures within 1 business day if possible.

1.7. REPORTS / DOCUMENTATION. The contractor shall prepare and submit written reports after the completion of all inspection / maintenance, repairs, tests, and certification of each fire suppression system. The reports and / or documentation shall be forwarded to the COR and CO within two (2) business days after the completion of work. The reports and / or documentation shall include but not be limited to: location, type of equipment with model number and manufacturer. In addition, all reports shall note any work performed, repairs completed, date of repair, date of testing, date of certification, name of technician, company name with phone number and overall condition of the equipment.

2.0 SERVICE DELIVERY SUMMARY.

3.0. GOVERNMENT FURNISHED PROPERTY AND SERVICES. All reasonable quantities of utilities will be available to the contractor without charge. Any temporary lines and connections that may be required shall be installed, maintained and removed by the contractor at his expense and in a manner satisfactory to the COR.

3.1. SECURITY, FIRE, and MEDICAL SERVICES. The government will provide police and fire protection. In the event of a medical emergency, base ambulance service for transporting an injured employee to a local hospital is available. McGuire Security Forces / Dix DOD Police Force can be reached at phone numbers (609) 562-6001/2/3. Lakehurst DOD Police Force can be reached by dialing (732) 323-4000. Base Fire Departments shall provide initial response and fire protection services to the contractor. The Base Fire Alarm Control Centers can be reached at phone number 911 from a base phone. If dialing 911 from a cell phone, the location must be fully identified to ensure that the proper responder is notified. The 87th Medical Treatment Facility (MTF) may provide urgent health care to any contractor employees or agents for injuries occurring while on duty. Urgent health care is defined as medical care authorized to the extent necessary to save life or limb and prevent undue pain and suffering. Contractor employees will be transferred to a civilian medical facility as soon as they are appropriately stabilized. The cost of such treatment will be paid for, in full, within a reasonable period of time (as determined with/by the Base Legal Office’s assistance), by the contractor or the contractor’s employee and will not be borne by the 87th MTF, the United States Air Force or the government. Billing/accounts receivable is processed based on services provided, which is captured on an Air Force Form 552 (Pre-Hospital Evaluation Patient Care Report). Verbiage above is based upon the 87th MTF current practice of account receivable IAW AFI 41-120, Medical Resource Operations, and is specific to Joint Base McGuire-Dix-Lakehurst, New Jersey. Should there be any universal language that the Defense Health Agency distributes, it is imperative that verbiage takes priority to the verbiage currently suggested or in use. Lakehurst Specific: Follow-on emergency medical care will be provided to contractor and their employees at Community Medical Center, Toms River. Charges for medical care will be at the contractors or employees’ expense. Emergency Medical Service phone number is 911 from a base phone. If dialing 911 from a cell phone, the location must be fully identified to ensure that the proper responder is notified.

3.2. PHYSICAL SECURITY. The contractor shall be held fully accountable for any failure to maintain the physical security of all base restricted areas, secured facilities or sites that they are responsible for providing services within. The contractor shall be responsible for the safekeeping and inventorying of all government-furnished keys and combinations issued for the performance of services within secured areas. All losses or damages caused by the contractor, or by the contractor’s failure or negligence in maintaining proper security of these areas will be paid for by the contractor. Upon termination or completion of the contract, the contractor shall secure the previously issued keys and return them to the COR within twenty-four (24) hours.

4.0. GENERAL INFORMATION.

4.1. QUALITY CONTROL. The contractor shall develop, submit, and maintain a quality control program and the necessary quality control procedures to ensure that services are performed in accordance with the established commercial standards. The government, through the COR, shall periodically evaluate the contractor’s work performance in accordance with the Quality Assurance Surveillance Plan (QASP).

4.2. HOURS OF OPERATION. The normal hours of operation for the contractor to perform normal maintenance and repair services required under this contract are 7:00 AM to 4:00 PM, Monday through Friday. There are some systems that require servicing outside the normal hours of operations.

4.3. RECOGNIZED HOLIDAYS. The contractor is not required to provide normal service federal holidays. Federal holidays are as follows:

New Year’s Day - 1 January Martin Luther King Day - 3rd Monday in January President’s Day - 3rd Monday in February Memorial Day - last Monday in May Juneteenth – 19 June Independence Day - 4 July Labor Day - 1st Monday in September Columbus Day - 2nd Monday in October Veteran’s Day - 11 November Thanksgiving Day - 4th Thursday in November Christmas Day - 25 December The CO or COR must approve in advance, excluding legal holidays, any exceptions to work hours and designated workdays. The contractor shall submit their request to CO and COR no later than two (2) working days in advance of the requested change(s).

4.4. CONTRACTOR PERSONNEL. The contractor and their employees shall comply with all base regulations at all times and shall conduct themselves in a professional manner. Uniforms, badges, and good behavioral conduct will be mandatory. The contractor shall provide a complete and current employee roster to the CO and COR within ten (10) working days of the contract award. The contractor’s employee roster shall identify the primary and alternate site manager or foreman and the Quality Control inspector and their telephone numbers. As required, the contractor shall provide updated copies of their employee roster to the COR and CO.

4.5. CONTRACTOR EMPLOYEE UNIFORMS AND IDENTIFICATION. All contractor employees shall wear a distinctive company logo on their outer garment at all times. The contractor employee shall be neat and professional in appearance and meet current commercial standards. In addition, the contractor’s employees shall wear a company-issued identification badge with the company’s name, employee’s name and employee’s photo prominently displayed on their outer clothing.

4.6. TOBACCO POLICY. The contractor shall ensure that all contractor employees do not use tobacco products within 50 ft. of any base facility, around fuel tanks and generators, within any clearly marked “No Smoking” areas or within 50 ft. of any flight line aircraft parking areas.

4.7. SAFETY AND ACCIDENT REPORTING. The contractor shall be responsible for providing services under this contract IAW all base, local, state, and Federal occupational safety requirements. The contractor shall ensure that all services are conducted safely at all times. The contractor shall ensure that all contractor employees are issued and properly use all required safety personal protective equipment. The contractor shall use mechanically sound and safe vehicles and equipment in the performance of services under this contract. The contractors shall take necessary corrective actions if the contractor’s employees are conducting operations in an unsafe manner. In the event of an accident, the contractor shall contact the base emergency 911 service and the COR immediately. Additionally, the contractor and contractor’s personnel will be knowledgeable of and comply with all other base incident-reporting procedures. See the Safety Guide for Civilian Contractors, March 2022, on Appendix B for additional information.

4.8. INCLEMENT WEATHER SCHEDULE. The contractor shall provide operational service during periods of inclement weather. No exceptions shall be granted.

4.9. HIRING GOERNMENT PERSONNEL. The contractor is restricted from hiring the COR, inspectors, monitors or any other government employees whose employment could result in conflict of interests in accordance with DOD 5500.7R.

4.10. SECURITY REQUIREMENTS / VEHICLES AND PASSES. All contractor or contractor employees’ vehicles used for the performance of this contract shall comply with all local, state and federal regulations. In addition, all vehicles described above must be registered through the Security Police Squadron, Pass and Registration and will comply with JB MDL directives. After award of contract, the contractor shall request through the COR, CO and Security Forces to be issued base passes and identification badges for their employees and work vehicles in accordance with the attached Contractor Security Appendix – 1 Sept 2021. Reference: Appendix C.

4.11. PERFORMANCE OF SERVICES DURING CRISIS DECLARED BY THE NATIONAL COMMAND AUTHORITY OR THE LOCAL INSTALLATION COMMANDER. This service does meet the criteria for continuation of performance during a crisis.

4.12. EXECUTIVE ORDER (EO) 13423. (Strengthening Federal Environmental, Energy, and Transportation Management). The contractor shall assist in compliance with this EO through the:

a) Use of products with post-consumer recycled content

b) Use of products that are recyclable

c) Use of low toxicity or non-toxic products

d) Use and installation of low maintenance products

5.0. ENVIRONMENTAL COMPLIANCE. The contractor is required to comply with all applicable bases, local, state, and Federal environmental laws and regulations, including Air Force Instructions, in effect at the time of performance of this contract. The contractor shall be responsible for obtaining and complying with any required operating permits. The contractor shall be responsible and liable for penalties, fines, or environmental damage claims that may be required or assessed by the local, state, or Federal governments as a result of the contractor’s performance, or failure to perform, during the course of this contract. The government will inspect for environmental compliance at their discretion and will notify the COR of any discrepancies found. In addition, the contractor may be subject to contractual sanctions including, but not limited to, termination, suspension, and debarment and adverse past performance assessment.

5.1. SOLID WASTE. The contractor is responsible for the proper handling and disposal of solid waste. The contractor shall also be responsible for any enforcement action that may be taken by the State of New Jersey, other State or the Federal Government related to handling, transportation and the proper disposal of solid waste materials. If notification, certifications, documentation, manifests, permits or any other written materials are required by law to be obtained, prepared and / or submitted, the contractor shall prepare same and provide a written copy to the COR. Any action, which violates permit requirements for compliance, must be reported to the Environmental Flight immediately.

5.2. NOTIFICATION OF ENVIRONMENTAL SPILLS. In the event that the contractor spills or releases any un-permitted substance, hazardous substance or hazardous waste into the environment, the contractor shall immediately report the incident to the Fire Department, the COR, and the CO. The contractor shall be liable for the costs of clean up and remediation of any spills or the release of such substance into the environment. The government shall provide the contractor with reasonable amounts of electricity and water.

5.3. MATERIALS. All materials used in the performance of services on the installation shall be in compliance with industry standards, local, Federal, and State laws, and will be used according to manufactures’ recommendations. Materials will be used for intended purposes and will be stored and utilized in accordance with industry standards. The contractor will submit Material Safety Data Sheets on all materials to be used fifteen (15) days prior use for approval by the COR.

6. APPENDICES:

A. ESTIMATED WORKLOAD DATA

B. SAFETY GUIDE FOR CIVILIAN CONTRACTORS

C. SECURITY REQUIREMENTS

APPENDIX A

ESTIMATED WORKLOAD DATA

MCGUIRE

The quantities below are estimates only and do not represent or guarantee the exact quantities or workload to be performed under any resultant contract. Actual quantities may vary during contract performance due to the dynamic nature of the base’s mission.

**Work shall be accomplished during non-duty hours Funds Type ANG are listed under O&M on Bid Schedule

McGuire Pertinent Ansul Equipment Information BLDG. 1706 - PAX Terminal 1 – Double Hood with 3 & 1 nozzles 1 – Electric Grill by Vulcan 1 – Steam kettle 1 – Deep Fryer 1 – Double Oven BLDG. 1712 - Fire Station 1 – Hood System 1 – Commercial Stove BLDG. 2007 - Golf Club 1 – Single hood with 4 nozzles 1 – Medium Flat grill by Garland 1 – Deep Fryer by Vulcan BLDG. 2414 - Child Development Center #2 1 – Double Hood with 2 nozzles 1 – Steamer by Groen 1 – Double oven by Bludgett 1 – Kettle grill by Groen 1 – Soup Kettle by Groen BLDG. 2424 - Dormitory 1 – Small hood with 4 nozzles 1 – Household range with oven BLDG. 2430 - Child Development Center #1 1 – Double hood with 3 nozzles 1 – Stove / grill with 4 burners 1 – Double oven by Garland 1 – Kettle / grill 1 – Double steamer by Cleveland 1 – Soup Kettle by Cleveland BLDG. 2503 – Chapel #1 1 – Small hood with 4 nozzles 1 – Small combination oven / grill with 6 burners by Vulcan

BLDG. 2504 - Gym 1 – Small hood with 4 nozzles 1 – Residential stove / oven by Maytag BLDG. 2508 - The Club 1 – Hood with 6 nozzles 1 – Deep fryers by Vulcan 1 – Flat top grill by Garland 1 – Barbeque by Garland 1 – Double hood with 9 nozzles 1 – Deep fryer by Vulcan 1 – Holding station by Vulcan 1 – Flat top grill by Vulcan 1 – Stove by Vulcan 1 – Grill by Magikitchain 1 – Hood with no nozzles 1 – Pizza stove by Vulcan 2 – Steamers by Rational BLDG. 2622 - Dormitory 1 – Small hood with 4 nozzles 1 – Residential stove / oven by Kenmore BLDG. 2623 - Dormitory 1 – Small hood with 4 nozzles 1 – Residential stove / oven by Kenmore BLDG. 2624 - Dormitory 1 – Small hood with 4 nozzles 1 – Residential stove / oven by Kenmore BLDG. 2635 - Main Dining Hall (work shall be accomplished during non-duty hours) 1 – Large hood with 6 nozzles 1 – Tilt grill by Groen 1 – Rotisserie by Hobert 1 – Medium hood with 4 nozzles 1 – Deep fryer by Vulcan 1 – Stove with oven by Vulcan 1 – Medium hoods with 8 & 2 nozzles each 1 – Deep fryer by Vulcan 1 – Flat top grill by Garland 1 – Barbeque by Vulcan 1 – Flat top grill by Hobert BLDG. 2705 - Community Center 1 – Large Hoods with 6 nozzles & 12 nozzles 1 – Deep fryer by Pitco 1 – Deep fryer by Vulcan 1 – Gas stove by Garland 1 – Gas grills by Garland 1 – Flat top grill by Garland 1 – Steamer craft by Cleveland 4 – Convection ovens by Garland 1 – Alto-Shaam cooker / warmer / steamer by Halo Heat BLDG. 2840 - Shoppette 1 – Medium hood with 4 nozzles 1 – Pizza oven by Lincoln Impinger

BLDG. 3452 - BX

Arby’s 1 – Small hood with 2 nozzles 1 – Flat top grill by Imperial 1 – Toaster by Hatcon Charley’s 1 – Small hood with 2 nozzles 1 – Flat top grill by Vulcan 1 – Toaster by Hatcon 1 – Deep fryer by Frymaster Popeye’s 1 – Medium hood with 6 nozzles 1 – Wok with 3 buners 1 – Deep Fryer by Frymaster 1 – Steamers by Cleveland 1 – Gas grill by Garland BLDG. 3350 - Fire Station 1 – Hood System 1 – Commercial Stove BLDG. 3827 - Chapel #2 1 – Small hood with 1 nozzle 1 – Stove / oven with 4 burners’ glass surface BLDG. 3830 - Youth Center 1 – Hood with 2 each nozzles by Kidde Fenwal 1 – Range grill manufactured by Vulcan Hart Co.

1 – 2 drawer warmer wells 1 – Toaster by Holman

DIX

DIX Pertinent Ansul Equipment Information BLDG. 1188 - Child Development Center 1 – Small hood with 3 nozzles 1 – Stove with oven by Vulcan 1 – Oven by Combithern BLDG. 1199 - Elementary School 1 – Medium hoods with 3 nozzles 1 – Cooker by Southbend 1 – Hyper steamer by Groen 1 – Kettle BLDG. 1279 - Youth Center 1 – Small hood with 2 nozzles 1 – Gas Stove with oven by Maytag BLDG. 3152 - Mulligan’s 1 – Medium hood with 6 nozzles 1 – Flat top grill with 2 burner stove by Wolf 1 – Deep fryer by Pitco Frialator 1 – Boiler by Nieco BLDG. 5226 - Fire Station #4 1 – Small hood with 2 nozzles 1 – Electric stove with oven by Frigidaire BLDG. 5240 - Main Chapel 1 – Medium hood with 4 nozzles 1 – Small hood with 2 nozzles 2 – Stoves with oven by General Electric BLDG. 5341 - Girl Scout Area 1 – Small hood with 4 nozzles 1 – Stove with oven BLDG. 5344 - PRIDE Customer Service 1 – Small hood with 2 nozzles 1 – Gas stove with oven by Hot Point BLDG. 5349 - HVAC Shop Break Room 1 – Small hood with 2 nozzles 1 – Gas stove with oven by Hot Point BLDG. 5353 - Fire Station #3 1 – Small hood with 2 nozzles 1 – Electric stove with oven by Frigidaire BLDG. 5399 - Burger King 1 – Medium hood with 6 nozzles 1 – Boiler by Duke 1 – Large deep fryer by Frymaster BLDG. 5428 - Family Support Center 1 – Small range hood 2 nozzles 1 – Electric Stove

BLDG. 5502 - Dining Hall 2 – Large hoods with 12 nozzles 1 – Stove with oven by Vulcan 1 – Stove with oven by Garland 1 – Tilt grill by Vulcan 1 – Tilt grill by Market Force 1 – Medium hood with 2 nozzles 1 – Deep fryer by Imperial BLDG. 5517 - NCO Academy 2 – Large hoods with 12 nozzles BLDG. 5555 - Dining Hall 4 – Medium Electric Range hoods 8 nozzles 1 – Flat cook top 1 – Large range hood 7 nozzles 1 – Deep fryer by Vulcan 1 – Electric range 1 – Large range hood 1 nozzle 1 – Gas range BLDG. 5610 - Dining Hall 1 – Large hood with 10 nozzles 2 – Deep fryers by Vulcan 2 – Flat top grills with oven by Cleveland 2 – Gas stoves with oven 1 – Tilt grill by Cleveland 2 – Medium hoods with 8 nozzles 4 – Flat top grills by Eagle group BLDG. 5635 - MRB Auditorium 1 – Small hood with 2 nozzles 1 – Gas stove (4 burners) by Hot Point BLDG. 5640 - Dining Hall 1 – Medium hood with 11 nozzles 3 – Gas stoves (4 burners) with oven by Garland 1 – Grill by Garland 3 – Deep fryers by Vulcan 6 – Cookers by Garland 1 – Steamer by Cleveland 2 – Kettle cookers by Cleveland 1 – Hot pot by Cleveland 2 – Medium hoods with 4 nozzles

BLDG. 5904 - Dining Hall 1 – Medium exhaust hood with 8 nozzles 3 – Deep fryers by Keating 2 – Tilt Grills by Market Force 2 – Gas stoves by garland 2 – Kettle by Cleveland 2 – Flat top grills by Franklin 2 – Medium hoods with 4 nozzles 4 – Flat top grills

BLDG. 5950 – Soldier’s Chapel 1 – Stove with oven

BLDG. 5986 - Dining Hall 1 – Large hood with 9 nozzles 1 – Tilt grill by Cleveland 2 – Deep fryers by Frymaster 2 – Gas stoves by Garland 2 – Flat top grills by Garland 1 – Deep fryer by Vulcan 2 – Small hoods with 4 nozzles 2 – Flat top grills BLDG. 5997 - Doughboy Inn 2 – Small hoods with 2 nozzles 2 – Electric stoves with oven by Hot Point BLDG. 6054 - Bowling Alley 1 – Medium hood with 4 nozzles 1 – Flat top grill with oven & 4 burners by Garland

WCS denotes wet chemical system with 2 nozzles.

Funds Type – CERDEC is listed under O&M on Bid Schedule.

Pertinent Ansul Equipment Information BLDG. 179 - Battery Shop 1 – Hood system 1 – Commercial stove BLDG. 333 - Snack Bar 1 – Hood system 1 – Grill 1 – Deep fryer BLDG. 657 - Child Development Center 1 – Hood System 1 – Commercial stove BLDG. 687 - Firehouse 1 – Hood system 1 – Commercial stove

CONTINUED

APPENDIX B

SAFETY GUIDE FOR CIVILIAN CONTRACTORS

(ATTACHMENT PROVIDED UPON AWARD)

APPENDIX C

87th SECURITY FORCES SQUADRON APPENDIX TO ALL PERFORMANCE WORK STATEMENTS FOR JOINT BASE MCGUIRE-DIX-LAKEHURST

After award of contract, the contractor shall request through the COR, CO and Security Forces to be issued base passes and identification badges for their employees and work vehicles in accordance with the attached McGuire AFB contractor Security Appendix 4 to Annex C to JB MDL JIDP – SEP 21.

(ATTACHMENT PROVIDED UPON AWARD)