Drawing.pdf
PDF 143 KB Posted
- Attached to
- Skid Boards (BPA)
- Solicitation number
- FA4460-23-Q-0289
About this file
This document contains a solicitation for a blanket purchase agreement and technical drawing specifications. The Air Force Air Mobility Command is seeking to establish multiple BPAs for skid boards manufactured according to an attached technical order. Vendors would provide skid boards on an as-needed basis, with estimated quarterly requirements ranging from 400 to 1200 units and a minimum of 480 units per month. Pricing must be entered for a single skid board, and will be used to order quantities under the BPA throughout its term. The maximum allowed for a single order is $50,000 and the contractor's total obligation may not exceed $250,000. Preference will be given to suppliers able to deliver 500 units quarterly with surge flexibility.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Questions and answers .pdf | ||
| Combo Solicitation.pdf | ||
| Provisions and Clauses.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Chapter 8
8-2 TM 4-48.03/ MCRP 4-11.3C/TO 13C7-1-11 15 March 2016
Notes.
This drawing is not drawn to scale.
All dimensions are given in inches.
Use only AC grade plywood for skid boards.
① Place a ¾- or 1- by 48- by 48-inch piece of plywood on a flat surface.
② Drill four ½-inch holes on each side as shown above.
③ Measure 3 inches in from each corner of the skid board and make a diagonal cut.
④ Cut eight 8-foot lengths of ½-inch tubular nylon webbing. Route one length through hole A from the bottom and the other end through hole B from the bottom. Even the ends.
⑤ Repeat step 3 for holes C and D and remaining sides.
Figure 8-1. Locally fabricated skid board prepared for single A-22 load
D
C B A
18 18 2 5 5
File details come from the government source that posted it. Updated .