SF30-Amend_0002.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

The purpose of this amendment is to provide REVISED PWS, CLINS, Attachment 1 and 2 per site visit changes.

Response date remains unchanged: Response due time is May 10, 2019; 10:00am CST.

Please send quote via email to alicia.moore.1@us.af.mil. P.O.C. Alicia Moore; 501-987-8113.

Enclosed: REVISED PWS, CLINs Attachment 1 and 2.

FA4460 19 CONS LGC

19 CONS LGC

CP 501 987 3303

642 THOMAS AVE

LITTLE ROCK AFB, AR 72099-4971

FA446019QA003

1 18

05/07/2019

Performance Work Schedule

(PWS)

for

Modular Furniture

REVISED

PER AMEND 0002

Date: May 07, 2019

Location:

96th Aerial Port Squadron

Building 266, Cannon Drive Little Rock Air Force Base, Arkansas 72099

Table of Contents Section

1.0 Scope 3

1.1 Site Visit (Per Amend 0002) 3

2.0 Description of Services 5

2.1 General Services 5

3.0 Design Services 6

4.0 Product Markings/Documentation/Tools 7

5.0 Delivery Services 8

6.0 Installation and Removal Services 8

7.0 Inspection/Acceptance Checklist 9

8.0 Government Furnished Property/Support 10

9.0 Site Conditions 10

10.0 Base/Installation Specifics 10

Attachments:

1 – Line Items 0001-0011(Per Amend 0002)

2 – Line Item 0012(Per Amend 0002)

3 – DD Form 250 - Material Inspection and Receiving Report

REVISED PWS Bldg. 266-Modular Furniture

1.0 Scope

Contractor shall provide the design, delivery, assembly and installation of modular furniture and accessories as described in Attachment 1 and 2, Line Items 0001-0012 for Building 266. Contractor must be an approved Haworth distributor with all desk cabinet keys randomized. (Per Amend 0002)

Responsible offerors shall provide a firm-fixed-price quote for all of the line items to be considered responsive to this solicitation.

1.1 Site Visit: A Site visit will be conducted on May 01, 2019 from 10:00am to 11:00am CST (local time) at Bldg. 266, Little Rock AFB. A Base representative will be at the Main Gate with the List of those attending the site visit from 9:15am to 9:45am to assist with base access.

Interested parties shall email the Contract Specialist (CS), Alicia Moore at alicia.moore.1@us.af.mil a complete list of personnel who are expected to attend the site visit NLT April 30, 2019 10:00am to CST

(local time). This list will contain Privacy Act information as required as well as the expectation that each individual will be able to present a current and valid state identification, to meet Little Rock AFB Security

Forces requirements. See Base Installation policy at section 10.0 - Base/Installation Specifics of this PWS.

Once the contract is awarded, it becomes the responsibility of the contractor to validate the actual site conditions as well as any specific needs of the customer. Even with Air Force efforts to standardize furnishings under this program, design work after evaluation could reveal that the number of cubicles may require a small adjustment. It is understood that the actual site parameters or certain customer requirements may deviate from the standard typical layouts; therefore, any deviation that causes an increase in the price submitted during the quoting process must be documented in writing and submitted to the Contracting Officer for review, along with a floorplan reference to show just cause. A final furniture layout and Bill of Materials (BOM) will then be provided that meets the customer requirements and accommodates the physical environment. Design parameters and expectations are followed in Section 3.2.

2.0 Description of Services

2.1 General Services

Coordination and management of this requirement, to include but not limited to; the equipment and people required to create design, deliver, assemble and install modular furniture within Bldg. 266. This includes ongoing servicing of any items defective due to manufacturing error as well as for replacement or repair of any damaged item after purchase.

2.1.1 The contractor shall perform all necessary tasks to design, deliver, assemble and install purchased modular furniture in accordance with the requirements stated in this section.

2.1.2 The contractor shall be responsible for all personnel, equipment, tools, materials, supervision, storage, assembly, transportation, electrical, communication, incidentals and all other items and services necessary to provide modular furniture.

2.1.3 The contractor shall be knowledgeable of and shall comply with all applicable federal, state, and local laws, codes, permits, DoD, AF, and base requirements and instructions required for the performance of the duties in this Performance Work Statement (PWS).

2.1.4 The contractor shall ensure policies and procedures are established that protect the safety and welfare of customers, employees, and the community to minimize or eliminate safety or environmental risks. These policies shall comply with Federal and Installation policies and procedures.

2.1.5 The contractor shall provide a contract manager who shall be responsible for the performance of the work. The contract manager or alternate shall have full authority to act for the contractor on all contract matters relating to the daily operations of this contract on the installation.

2.1.6 The contractor shall be responsible for project site management, scheduling, coordination and mailto:alicia.moore.1@us.af.mil technical assistance to the Air Force representative as required throughout the project.

2.1.7 The contractor shall not employ persons for work on this contract if such employee is identified to the contractor by the CO as a potential threat to the health, safety, security, general well-being or operational mission of the installation and its population. Contractor personnel shall present a neat appearance and be easily recognized as contractor employees.

2.1.8 The contractor shall manage ordering, shipment, delivery and installation of all new furniture from manufacturer to final acceptance by the designated Government Acceptor.

2.1.9 The contractor shall provide customer service during normal duty hours, 0730-1630 hours, Monday through Friday, except for federal holidays.

2.1.10 Recognized US Federal Holidays are as follows: New Year’s Day, Martin Luther King Day, Presidents Day, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans Day, Thanksgiving and Christmas. If the holiday falls on a Saturday, it is observed on Friday. If the holiday falls on Sunday, it is observed on Monday.

2.1.11 When the contractor desires to work other than standard times, a written request shall be submitted to the Government Acceptor for approval. Written approval from the Contracting Officer must be received before proceeding with the work. The request shall be submitted at least five (5) work days prior to the proposed performance of work, and it shall indicate the day/days, time/amount of work, and reason why performance is necessary during non-standard hours.

2.1.12 The contractor shall provide alternate work locations for employees or allow employees to take vacation during designated Government non-work days or other periods where government offices are closed.

2.1.13 All Air Force inquiries shall be responded to by a contractor representative within two business days.

2.1.14 Meetings may periodically be held between top-level base personnel and contractor management to discuss contract status. The CO will notify the contractor in writing in advance of the place and time of required meetings.

2.1.15 Vehicle registration, proof of insurance and a valid driver’s license shall be presented to gain base access.

2.1.16 The contractor shall be responsible for coordination of an escort through any controlled areas through the assigned Government Acceptor.

2.1.17 Lost vehicle and entry passes shall be reported immediately to Security Forces as well as the

Government Acceptor in accordance with the local security forces policy.

2.1.18 The contractor shall be responsible for any storage of all modular/demountable wall furniture, components, parts and assemblies prior to and during installation in accordance with the agreed upon delivery schedule.

3.0 Design Services

3.1 Providing professionals versed in the necessary programming, space planning and product specification, able to communicate product capabilities to the customer, to ensure products purchased meets the requirements.

3.1.1 As a part of the quote process, the contractor will provide, following the award, within parameters specified below, a complete design that takes into account site condition considerations, as well as information gathered during initial customer review, shall be provided.

3.1.2 The contractor shall be able to provide design services, including space planning, site verification, and material selection as necessary for each this contract.

3.1.3 The contractor shall define and furnish the equipment necessary to accomplish design tasks.

Standard equipment in addition to the hardware and software shall include but not necessarily be limited to reproduction machines, plotters, paper, pencils, fax machines, and office furniture.

3.1.4 The contractor shall be responsible for collection of information relevant to the design of a space.

Examples could include personnel interviews, questionnaires and walk-through inspections of the facility.

3.1.5 Services shall include site evaluation to ensure proper fit of the new furniture within the given space and that all structural and other anomalies are taken into account.

3.1.6 As necessary, the contractor is responsible for notifying the Government of all power requirements regarding location of communication, LAN and power junction boxes. The contractor shall be responsible for cabling, connecting all electrical, and communication from the facility to the furniture unless furniture is designed to use wall outlets (open). Connections shall be Turnkey and ready for the user to plug in appliances or electronics.

3.1.7 Design shall ensure that all outlets included in the design are accessible to the user, free and clear of obstacles.

3.1.8 Design shall not allow more than four cubicles to be served by a single circuit.

3.1.9 Design shall ensure that no more than two duplex outlets (four plug in points) are put onto the same circuit.

3.1.10 Design shall ensure that no existing wall outlets or thermostats are covered or concealed by panels or other systems furniture components.

3.1.11 Design shall consider utilize wall-mounted applications where possible.

3.1.12 The contractor shall communicate with the Government representative to review the installation drawings prior to submission of a final price quote.

3.1.13 The contractor shall provide additional drawings of furniture layouts, if requested by government representative on a non-rewritable CD or DVD in both .dwg and .pdf formats unless otherwise specified in the contract.

3.1.14 Design service shall include an initial complete design with up to two additional revisions prior to final approval.

3.1.15 Designs of the location shall include a Basic component floor plan sheet in which all modular furniture is tagged: to include graphic symbols for all major hanging components (flipper cabinets, shelves, task lights, tack boards, work surfaces, drawers, etc.) as determined by the government. This design sheet shall include station numbers and movable wall and associated product locations, in 1/4" = 1'-0" scale.

3.1.16 Designs of each location shall include a Panel and Hardware Layout sheet: to include all finish colors and fabrics, panel widths (30", 36", 42", etc.), in 1/4" = 1'0" scale, in addition to display hardware, keys and locksets shall be included.

3.1.17 Design sheet layouts of each location shall include a Furniture Power Distribution sheet in 1/4"

= 1'0" scale to include the location of all new powered panels, powered components, receptacles, communication ports, power poles, powered raceways, base electrical feeds and building connection points, as applicable.

3.1.18 The contractor shall maintain an updated, automated master copy of all furniture layouts, (designs/redesigns) accomplished under this contract for the duration of the warranty, after government acceptance of the project.

3.1.19 Design shall conform to the parameters established in the Architectural Barriers Act regarding accessibility of persons with disabilities.

4.0 Product Markings/Documentation/Tools

Items used after product acceptance used to identify or modify a particular product.

4.1 All documentation (Owner’s manuals, warranty information, assembly instructions, maintenance and care instructions, operating instructions, etc.) shall be provided to and reviewed with the Government representative upon completion of the installation.

4.1.1 Special assembly tools (security hardware wrench, spare parts provided with the furnishings, etc.)

shall be provided to the Government representative prior to final Government acceptance of furniture and services.

5.0 Delivery Services

5.1 The contractor is responsible for transportation of all furniture, loading, unloading, storage and all necessary movement from factory to final onsite set up.

5.1.1 The contractor is responsible for on-site coordination of all staging and deliveries of their product, to include access to and operation of any equipment needed for unloading and movement of materials or product.

5.1.2 The contractor is responsible for determination of the appropriate delivery method and handling, based on site conditions to include the non- existence of loading docks and equipment at any given location. Special circumstances may be identified by and negotiated with the Contracting Officer.

5.1.3 All work shall comply with applicable building standards and codes, specifically: National

Electrical Code (National Fire Protection Association (NFPA 70) and National Life Safety Code

(NFPA 101).

5.1.4 The contractor is responsible for following all safety and security guidelines within the area in which work is being performed, to include securing any contractor owned tools or equipment, and any on site storage being utilized.

5.1.5 The contractor shall prevent its personnel from entering any area other than the designated work area.

5.1.6 The contractor shall maintain a means of egress within all designated work areas to comply with fire codes.

5.1.7 The contractor shall ensure its personnel eat, drink, or smoke only in designated areas.

6.0 Installation and Removal Services

Manufacturer certified professionals to assemble and install modular furniture per the approved design drawings.

6.1 The contractor shall appoint an authorized representative who will be the company's senior representation on site for all customer communication and enforce compliance of all requirements for the project. This representative shall have a physical presence during any delivery and assembly throughout the installation process unless agreed to by the Government representative.

6.1.1 The contractor representative shall meet with Government representative to review the installation drawings prior to installation.

6.1.2 The contractor shall assemble and install all modular furniture and accessories in accordance with approved design and basic component floorplan, panel plan and electrical plan.

6.1.3 Contractor shall be liable for any damage to government property caused by the contractor or their representatives.

6.1.4 During assemble and installation the contractor shall protect all furniture and building materials, to include carpet, existing within the space with industry approved protective coverings inclusive of craft paper, moving blankets and such type material. The contractor shall not use protective materials that will leave any type of residual print, outline or imaging on any furniture or building materials. Contractor shall not repair damage to finishes but will be responsible to pay for damages.

The Government will make repairs and back charge the installation contractor.

6.1.5 The contractor shall uncrate/unpack all items and perform required assembly in accordance with the manufacturer instructions.

6.1.6 Services shall include inspection of product for shipping damage. If damage is found it shall be the responsibility of, the contractor to notify the authorized government representative and make all arrangements for replacement or repair of the item(s) damaged. Damaged items are not to be installed unless otherwise directed by the Government representative in writing.

6.1.7 Services shall include assembly of new product to conform to final Air Force approved design drawings.

6.1.8 Any furnishings attached to the building shall be attached securely.

6.1.9 Installation of all modular furniture and accessories must be under the oversight of an onsite manufacturer certified installer.

6.1.10 Services shall include removal of packing materials from the installation.

6.1.11 All trash removed from the worksite shall be disposed of in accordance with state laws, and packaging and other recyclable materials shall be recycled wherever possible.

6.1.12 The contractor shall maintain environmental controls when working in any Air Force facility, to include but not limited to keeping doors shut and lights off when not in use and turning off vehicle engines when parked.

6.1.13 Light fixtures shall have appropriate lamps and be in working order.

6.1.14 Prior to acceptance, the contractor shall clean all new furniture only with the manufacturer's recommended cleaning agents/products.

6.1.15 The contractor shall provide all modular furniture and accessories, completely assembled, installed, and operational, including keys in each lockset.

6.1.16 New furniture, equipment, and accessories shall be level, square, and in proper alignment with adjoining furniture. All drawers should operate smoothly and stay closed when not in use.

6.1.17 The contractor shall inspect to ensure the new furniture is free of surface dirt and defects, the installation is complete, and the new furniture is ready for use.

7.0 Inspection/Acceptance Checklist

Validation between the contractor and the Government representative that all modular furniture and accessories has been installed according to manufacturer guidelines and customer specifications.

7.1 A post-assembly and installation walkthrough shall be coordinated with the contractor’s authorized representative and Government authorized representative.

7.1.1 Any and all areas requiring correction shall be documented in a punch list by the contractor and provided to the authorized government representative upon completion of a joint walk through by the contractor and authorized government representative.

7.1.2 A final walk through will be performed with the contractor and the Government representative to ensure all punch list items have been addressed to the satisfaction of the Government representative.

7.1.3 Upon completion of all contract requirements, the contractor will submit to the Government representative the Material Inspection and Receiving Report (DD Form 250) and documentation of completed punch list items. The Government representative will complete the DD Form 250 and return it to the contractor. The Contractor may then submit a final invoice in the Wide Area Workflow system (WAWF) (https://wawf.eb.mil/) and will attach an electronic copy of the signed DD Form 250 to the invoice submission.

8.0 Government Furnished Property/Support:

Base support includes Government-controlled working space and utilities at Building 266.

9.0 Site Conditions

9.1 Standard site conditions shall be considered those that include:

9.1.1 Free and clear hard surface access to the receiving and installation location during regular working hours.

9.1.2 Parking and off-loading area suitable for access by a truck within 100 feet of the building entrance closest to product installation area.

9.1.3 Threat condition level of the base requires all contractor personnel to get base access in order to complete the product installation.

9.1.4 A staging area adequate to sort, stage and uncrate products. Recycling containers may be provided with advanced notice call to 987-5540 or 987-7187. Contractor shall provide a waste receptacle suitable for disposal of non-recyclable materials.

9.1.5 Includes electric power, working lights, heating and air conditioning.

9.1.6 A building ready for the installation of furniture (i.e. other tasks such as painting and flooring are complete so as not to cause any delays in performance)

9.1.7 Contractor shall notify the Contracting Officer of any deviations from the above standards, as well as any requests for equitable adjustment to the contract price.

10.0 Base/Installation Specifics

10.1 All commercial trucks must enter through the commercial vehicle inspection area at the Vandenberg

Drive Gate (Main Gate) which is Air Base Exit off highway 67/167 for inspection. In accordance with the Installation security forces, base entry procedures must adhere to delivery vehicle process requirements mandated by the 19th Airlift Wing. Once at Vandenberg Gate the driver must obtain a current pass, and be able to show:

A current Vehicle Registration

A current Proof of Insurance

A valid and current Driver's License for the driver

A valid and current Driver's License or other State Identification for all passenger(s) in the vehicle.

http://www.wawf.eb.mil/

10.1.1 Gate Procedures:

Once at the inspection area, be prepared to exit the vehicle and allow for vehicle inspection. At this time, you may ask for directions to your final destination.

Arrival at the appropriate gate after the designated allotted time will result in non- admittance to the installation.

This procedure will occur each time a commercial truck requests access to the base.

10.1.2 Personnel should provide the following items when entering an installation:

Current Registration for all vehicles Current Proof of Insurance for all vehicles Valid driver’s license for each driver Valid driver’s license or other state identification for each passenger

Depending on the current Force Protection Condition, a government representative may be required to sponsor those people in person at Pass & ID, building 451.

The sponsor must state the guest's purpose and destination. It is the responsibility of the contractor to validate this need with their government POC prior to their arrival to coordinate the arrival time accordingly. Sponsors may request that a pass be applicable for multiple days if needed.

10.1.3 Mission Essential Services: Contractors are not considered mission essential.

10.1.4 Prohibitions: Firearms may not be brought on base under any circumstances. Individuals with criminal records are not allowed on base. Contractor personnel are prohibited from sponsoring guests onto the installation.

Attachments:

1 – Line Items 0001-0011 (Per Amend 0002)

2 – Line Item 0012 (Per Amend 0002)

3 – DD Form 250 - Material Inspection and Receiving Report:

Helpful Site for DD Form 250: http://acqnotes.com/acqnote/careerfields/department-of-defense-form-250 http://acqnotes.com/acqnote/careerfields/department-of-defense-form-250

REVISED CLINs Per Amendment 0002

CLIN

DESCRIPTION QTY

UNIT

OF

ISSUE

UNIT

PRICE

TOTAL

PRICE

HAWORTH. Compose L-shape workstations including 66"

Grade A upholstered panels, 72"W x 24"D work surface, 48"W x 24"D work surface, box/box/file pedestal, file/file pedestal, 24"W overhead storage, 48"W overhead storage, Grade A upholstered tack board, locks, task light, and all required supports and hardware. CLINAB. IAW PWS.

Room 140B

2 EA

HAWORTH. Compose reception including 42"H Grade A upholstered panels, 96"W x 24"D work surface, (2) 48"W x

24"D work surfaces, 96"W x 12"D transaction top, box/box/file pedestal, file/file pedestal, locks, and all required supports and hardware. CLINAD-1M20M. IAW PWS.

Room 140B

1 EA

HAWORTH. Compose workstation including 50"H Grade A upholstered panels, 48"W x 24"D work surface, box/box/file pedestal, locks, and all required supports and hardware.

CLINAT. IAW PWS. Room140A

1 EA

HAWORTH. Compose workstation including 50"H Grade A upholstered panels, 48"W x 24"D work surface and all required supports and hardware. CLINAU_NT. IAW PWS.

Room 143

12 EA

HAWORTH. X-Series desk including 72"W x 30"D desk, 60"W x 24"D return, box/box/file pedestal, file/file pedestal, 24"W file/file wardrobe, 72"W overhead hutch, Grade A upholstered tack board, locks, task light, (2) grommets, and all required supports and hardware. CLINCB-6D23D27D.

Room136

1 EA

HAWORTH. X-Series desk including 72"W x 30"D desk, 48"W x 24"D bridge, 72"W x 24"D credenza, box/box/file pedestal, 30"W lateral file/file pedestal, 72"W overhead hutch, Grade A upholstered tack board, locks, task light, (3) grommets, and all required supports and hardware.

CLINCC-28D. IAW PWS. Room 118

2 EA

HAWORTH. X-Series desk including 66"W x 30"D desk, 42"W x 24"D bridge, 66"W x 24"D credenza, box/box/file pedestal, 30"W lateral file/file pedestal, 24"W file/file wardrobe, 66"W overhead hutch, Grade A upholstered tack board, locks, task light, (3) grommets, and all required supports and hardware. CLINCC-8D9D23D28D. IAW PWS.

Room 139

1 EA

HAWORTH. X-Series desk including 72"W x 30"D desk, 48"W x 24"D return, box/box/file pedestal, file/file pedestal, 24"W file/file wardrobe, 72"W overhead hutch, Grade A upholstered tack board, locks, task light, (2) grommets, and all required supports and hardware. CLINCB-23D27D.

Room 150-2 Each, Room 151-2 Each

4 EA

HAWORTH. Compose workstation including 50"H Grade A upholstered panels, 48"W x 24"D work surface and all required supports and hardware. CLINAT_NT. IAW PWS.

Room 117 - 2 Each, Room 145 - 4 Each, Room 144 - 4 Each, Room 146/147 – 4 Each

14 EA

file://///vnvm-fs-002/82cons/SHARED/LGCA/WORKING/Units%20of%20Measure%20List.xlsx file://///vnvm-fs-002/82cons/SHARED/LGCA/WORKING/Units%20of%20Measure%20List.xlsx file://///vnvm-fs-002/82cons/SHARED/LGCA/WORKING/Units%20of%20Measure%20List.xlsx

REVISED CLINs Per Amendment 0002

HAWORTH. Compose L-shape workstations including 66"

Grade A upholstered panels, 50"H upholstered panels, 72"W x 24"D work surface, 48"W x 24"D work surface, box/box/file pedestal, file/file pedestal, 24"W overhead storage, 48"W overhead storage, Grade A upholstered tack board, locks, task light, and all required supports and hardware. CLINAB-2M-NT. IAW PWS. Room 118

2 EA

HAWORTH. Compose L-shape workstations including 66" Grade A upholstered panels, 72"W x 24"D work surface, 48"W x 24"D work surface, box/box/file pedestal, file/file pedestal, 24"Woverhead storage, 48"W overhead storage, Grade A upholstered tack board, locks, task light, and all required supports and hardware. CLINAA. IAW PWS.

Room 118

1 EA

HAWORTH. 450 Series tables 60"W x 30"D x 40"H with a

T-base and glides. NON CLIN ITEM. IAW PWS. Room 139

– 1 Each, Room 140A – 2 Each, Room 140B – 5 Each

8 EA

TOTAL

REVISED ATTACHMENT 1 PER AMEND 0002

CLIN#OOOl

HAWORTH: Compose L-shape workstations including 66" Grade A upholstered panels, 72"W x

24"0 work surface, 48"W x 24"0 work surface, box/box/file pedestal, file/file pedestal, 24"W 2 overhead storage, 48"W overhead storage, Grade

A upholstered tack board, locks, task light, and all required supports and hardware. Rooml40B

CLINAB

Striae Fabric

Cl-AH Element alNAD-1M20M

CLIN#0002

HAWORTH: Compose reception including 42"H

Grade A upholstered panels, 96"W x 24"0 work surface, (2) 48"W x 24"0 work surfaces, 96"W x

12"0 transaction top, box/box/file pedestal, file/file pedestal, locks, and all required supports and hardware. Room !40B

CLINA0-1M20M

Striae Fabric

Cl-AH Element alNAT

CLIN#0003

HAWORTH: Compose workstation including SO"H

Grade A upholstered panels, 48"W x 24"0 work surface, box/box/file pedestal, locks, and all required supports and hardware. Room 140A

Striae Fa bric

Cl -AH Element

Trim

BeigeTR-R

Trim

BeigeTR-R

Trim

BeigeTR-R

REVISED Attachment 1 Line Items 0001-0011

Description Qty Unit Price Extended Price Images

HAWORTH: 450 Series tables 60"W x 30"D x 40"H with a T-base and glides. Rooms 139 - 1 Each;

140A - 2 Each; 140B - 5 Each

LAMINATE

COLUMBIAN WALNUT

CLIN 0012

Trim Beige TR-R

REVISED Attachment 2 Line Item 0012

REVISED ATTACHMENT 2 PER AMEND 0002