Infrastructure Support - DRAFT PWS.docx
DOCX document 72 KB Posted
- Attached to
- Infrastructure Support services
- Solicitation number
- FA445227XXXX
About this file
This is a draft Performance Work Statement for Infrastructure Support services required by Headquarters Air Mobility Command (HQ AMC/A6). The requirement encompasses engineering support across six primary tasks: Virtualization Systems Engineering, Senior Cloud Architect, Network Systems Engineering (Secure and Non-Secure), Network Transport Engineering (Wired and Wireless), Network Planning Analyst (Command and Control), and Advanced Mobile Technology Specialist. The contractor must provide end-to-end technology analysis, assessments, and reviews of technical solutions to ensure consistency with Department of Defense and USAF base area network architecture standards, supporting AMC bases, HQ AMC, and enroute locations. All contractor personnel must be U.S. citizens with a minimum SECRET security clearance, possess a Tier 3 Security Investigation, and obtain DoD 8140 certification at IAT Level II or equivalent. Specific certifications are mandated for each task, including CompTIA Security+, CCNA, VMware Certified Professional, cloud architecture certifications (AWS Solutions Architect Professional, Microsoft Azure Solutions Architect Expert, or CompTIA Cloud+), and CCSP for cloud roles.
Performance will be conducted primarily at Scott Air Force Base, Illinois, during standard duty hours (07:30-16:30 CST, Monday-Friday), with on-site workspace and government-furnished equipment provided. The contract includes a one-year base period with four one-year option periods. Travel is required and structured as an optional CLIN with anticipated funding of approximately $25,000 per fiscal year, with specific locations and frequencies coordinated by the Contracting Officer/Contracting Officer's Representative. Deliverables include monthly status reports (A001) and project documents (A002) in MS Office formats, with all work products becoming government property with unlimited rights. All contractor and subcontractor personnel must comply with security requirements including DD Form 254, SF Form 312, background checks through DataMax or LEADS systems, and annual Information Assurance training via DoD Cyber Awareness and other required courses.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| HQ AMC_A64I Infrastructure Support Questionnaire.docx | DOCX document | |
| Infrastructure Support Sources Sought.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PERFORMANCE WORK STATEMENT Comment by BRAGG, PAMELA C NH-03 USAF AFMC OL-AMC/AFICC-KM/PMO: Please add page numbers to the bottom and center them. Comment by VICKERY, RANDALL M CIV USAF AMC AMC/A64I: Added centered page numbers
HQ AMC/A64I INFRASTRUCTURE SUPPORT
1 Oct 26
1. BACKGROUND / OBJECTIVE / SCOPE
1.1. Background and Objective: Headquarters Air Mobility Command HQ AMC/A6 requires engineering support for Virtualization, Cloud Networks, Secure and Non-Secure Networking, Network transmission for both wired and wireless, Assured Command and Control (C2) voice/video/data systems, and Advance Mobile Technology. The engineering support provides end-to-end technology analysis, assessments, and reviews of all technical solutions, products, services, and capabilities to ensure all are consistent with Department of War (DoW) and USAF base area network architecture and standards. These projects provide direct support to the Services (Army, Air Force, etc.), Combatant Commands (CCMDs), Joint Staff as well as the DoW business and acquisition communities depending on network access. HQ AMC communications equipment and systems are in continual need of technology refresh and upgrades that encompass system components, software, Local Area Networks (LANs), Wireless LANs, Network Multiplexing, voice and supporting infrastructures. The end result is more efficient and effective technology investments and ultimately improved global, net-centric operations which are delivered through products, services, and capabilities to AMC bases.
1.2. Scope: The scope of this requirement consists of six tasks. All six tasks will assess long-term roadmap, requirements documentation and evaluate technical solutions to ensure alignment and integration with AMC’s enterprise resource planning goals and objectives to enable system(s) to meet current and future projected metric requirements for reliability, availability, sustainment, efficiency, and effective compatibility with legacy and future systems. This requirement assists with developing an operational concept and evaluating advanced technology requirements to determine if existing equipment or new technology will meet future mission needs according to requirements and roadmap documentation. This contract supports AMC owned bases, HQ AMC, and Enroute locations.
2. SHARED TASKS AND REQUIREMENTS THAT APPLY TO TASK 1 – 6 LISTED IN SECTION 3:
2.1. Life Cycle Support: The Contractor shall analyze factors related to systems supportability and develop life-cycle support plans. Considerations for plan development will include the following factors:
2.1.1. Maintenance Support: Analyze maintenance support requirements throughout lifecycle, to include changes required toward end of lifecycle to maintain operations. Also include maintenance training requirements which incorporate industry best practices and standards.
2.1.2. Viability of System Components: Analyze lifecycle of system components and compare to expected lifetime for overall systems. If required, incorporate methods to update system components into lifecycle support plan.
2.1.3. Cost Analysis: Develop, compare, and forecast all costs associated with system(s) support. Include technical refresh/upgrades, maintenance, training, manpower, support methodology, and additional factors which will affect system support costs.
2.1.4. Site Surveys: The Contractor shall participate as a member of site survey and system acceptance teams to provide technical assistance and recommendations; assist in the development of the Project Support Agreement (PSA) identifying site locations for equipment, civil engineer support requirements, and communications support requirements; function as a member of system acceptance teams; validate the completion of the required systems tests and perform the necessary quality assurance checklists.
2.1.5. Leadership and Stakeholder Collaboration: The Contractor shall act as the primary technical liaison between the contracting program team, HQ AMC A6 (Communications and Information) staff, and other DoW program offices. The Contractor shall provide mentorship, technical governance, and architectural oversight to systems engineers, developers, and junior cloud administrators. Lastly, the Contractor shall evaluate emerging technologies, conduct Proofs of Concept (PoCs), and present formal technical recommendations and cost-benefit analyses to senior military leadership.
2.1.6. Required Experience: The Contractor must have a minimum of 5 years’ experience working on DoW networks or industry equivalent.
The Contractor shall assist the Government with preparing requirements documents, to include conducting market research, drafting Performance Work Statements (PWS), Statement of Work (SoW), and Statement of Objectives (SoO), Independent Govt Cost Estimates (IGCE), etc. The Contractor shall be capable of working both independently and work well in team environments.
3. SPECIFIC TASKS AND REQUIREMENTS:
The Contractor shall provide support for the tasks described in the subsequent paragraphs below:
3.1. Task 1 – Virtualization Systems Engineering: The Contractor shall provide engineering support for the design, deployment, administration, and secure operation of DoW enterprise virtualization infrastructure. This task ensures the high availability, scalability, and security of mission-critical applications and services hosted on VMware vSphere environments across both unclassified and secure networks. The goal is to ensure the smooth seamless operation of components located in Installation Processing Node (IPN) to provide maximum performance and availability for users. Specific task activities require extensive knowledge in areas such as infrastructure management, overall security and compliance enforcing Security Technical Implementation Guides (STIGs), and vulnerability management applying Information Assurance Vulnerability Management (IAVM) alerts, patches, and firmware updates to mitigate cyber threats.
3.1.1. High Availability and Disaster Recovery: Configure and test vSphere High Availability (HA), Distributed Resource Scheduler (DRS), and Site Recovery Manager (SRM) to guarantee continuous operations for warfighter support.
3.1.2. Resource Optimization: Monitor system performance, conduct capacity planning, and optimize resource allocation (CPU, memory, storage) to meet evolving mission requirements.
Technical Skills and Required Certifications
· Experience with building and maintaining Storage Area Network (SAN)
· Background with Cloud Based Technology and Cloud Computing
· Server Virtualization and Administration; experience using automation tools (i.e. PowerCLI, Ansible, vRealize, etc.) to script routine maintenance tasks and streamline provisioning processes
· Understand interoperability issues between mixed types of network/equipment to include new technology dealing with the transmission of secure data (CSfC and Suite B)
· Knowledge of data storage to include support in development and expansion of existing systems to support growth
· Understanding of IT programs/project management to include requirements validation, cost estimates, business case analysis, methodologies, system development life cycle (SDLC), and sustainment
· Experience designing, configuring, and maintaining Hyper Converged Infrastructure (HCI) and Virtual Desktop Infrastructure (VDI) software and hardware
· Must be a VM Ware Certified Professional and have a DoW 8140 IAT Level II certification at a minimum
3.2. Task 2 – Senior Cloud Architect: The Contractor shall possess the necessary skillset to serve as the technical authority for cloud strategy and architecture, helping HQ AMC transition legacy command-and-control (C2), logistics, and enterprise business systems into secure DoD cloud environments to include the design of resilient, scalable, and secure multi-cloud environments (CloudOne, AWS GovCloud and Azure Government) conforming to DoW Impact Levels (IL4, IL5, and IL6) and Zero Trust (ZT) architecture guidelines. Specific task activities include those identified below:
3.2.1. Cloud Architecture and Strategy:
· Lead the architectural design, planning, and implementation of enterprise-grade cloud solutions within USAF Cloud One, AWS GovCloud, and Microsoft Azure Government.
· Establish cloud migration pathways, cloud-native design patterns, and deployment strategies for complex, interconnected legacy applications.
· Design hybrid and multi-cloud architectures that ensure high availability, disaster recovery, and operational resilience to support global AMC missions.
· Author and maintain comprehensive architectural blueprints, system design documents, and interface control documents (ICDs)
3.2.2. DevSecOps and Automation:
· Standardize Infrastructure as Code (IaC) utilizing tools such as Terraform, Ansible, or CloudFormation to automate the provisioning of secure environments.
· Collaborate with software engineering industry teams to design and optimize continuous integration and continuous delivery (CI/CD) pipelines inside DoW containerized environments (e.g., Platform One, Kubernetes).
· Drive the adoption of cloud-native services, microservices, and serverless architectures where appropriate to reduce technical debt and footprint.
3.2.3. Cyber Security and Compliance:
· Architect cloud solutions in strict compliance with the DoD Cloud Computing Security Requirements Guide (CC-SRG) for IL4, IL5, and IL6 environments.
· Support the Risk Management Framework (RMF) process, collaborating with Information System Security Officers (ISSOs) to achieve and maintain Authorizations to Operate (ATO).
· Implement and enforce Zero Trust principles, technical controls, and DoD Secure Technical Implementation Guides (STIGs) across all cloud layers.
· Integrate identity, credential, and access management (ICAM) services with Air Force and DoD federated enterprise directory systems.
Technical Skills and Required Certifications
· Experience with cost estimation, cloud management platforms, and implementing Cloud FinOps practices to optimize DoW cloud spending
· Expertise in architecting cloud infrastructures within CloudOne, AWS GovCloud or Azure Government (multi-cloud experience is highly desirable)
· Strong working knowledge of containerization and orchestration platforms (e.g., Kubernetes, Docker, OpenShift) and DevSecOps pipelines.
· Proficient in IaC tools, particularly Terraform.
· Deep understanding of networking concepts in secure environments (VPCs, ExpressRoute, VPNs, Firewalls, Transit Gateways, DNS, and Load Balancers).
· Solid experience implementing federal security frameworks (DoW SRG, RMF, NIST SP 800-53, ZT)
· Familiarity with Air Force Platform One DevSecOps services and USAF software factory frameworks
· Cloud Architecture (at least one professional-level cert required)
· Certified Cloud Security Professional (CCSP)
· CompTIA Cloud+ (CVO-003 / CVO-004)
· AWS Certified Solutions Architect – Professional
· Microsoft Certified: Azure Solutions Architect Expert
· DoW 8140 Baseline Certification
· IAT Level II minimum (e.g., CompTIA Security+ CE, GSEC, SSCP) or IAM Level II/III (e.g., CISSP, CISM, CAP)
3.3. Task 3 – Network Systems Engineering (Secure and Non-Secure): The Contractor shall provide services to design, plan, implement and monitor networks supporting client’s systems on the NIPR/SIPR Base Area Network (BAN). Some of the information/systems using the network include but are not limited to wireless clients, video, data, and voice. The Contractor shall provide complete technical solutions to replace Layer 2/3 network components on Air Force installations. The Contractor shall also be able to analyze initial symptoms of network problems (first-line support) and provide advanced technical troubleshooting and analysis (second-line support). In addition, the Contractor shall analyze network equipment, operating systems, integration and testing, and cross functional work experience to facilitate support of multiple IP-Multimedia Subsystem (IMS), which defines the functional architecture for a managed IP-based network. Lastly, the Contractor shall be part of the Device Performance/Network User Testing, which evaluates new products/devices, as well as software protocols for various regions within the command. The Contractor shall participate in working groups, technical conferences, and meetings as required to provide the Government feedback on technical areas. Furthermore, the Contractor shall have the ability to reference and implement network standards, configurations, and AF Waiver requests, Quality of Service, VPN technology, Ethernet over IP, Wireless distribution, Commercial Solutions for Classified (CSfC), Suite B, Authority to Operate (ATO), Risk Management Framework (RMF), and Wireless applications specific to those identified below. The goal is to ensure the smooth operation of communication networks in order to provide maximum performance and availability for the users. Specific task activities include those outlined below:
3.3.1. Engineering Support:
Provide overall network engineering support for planning, designing, monitoring, and evaluating various components of voice, video, and data networks. Require OSI model/SME who can manage, troubleshoot, secure, and monitor network components in layer 2 and 3 to include base boundary, Service Delivery Point (SDP), and Point of Presence (POP). Provide administrative assistance to support secure and non-secure voice, video, and data storage. Prepare the network for VDI and cross domain solutions (CDS); understand CSfC transport to include CDS, encryption, transport, and end user access. Understand the various end points and can troubleshoot connection problems.
3.3.2. LAN Infrastructure: Conduct network and security surveys, review NIPR/SIPR networks and provide a detailed analysis allowing the Government to procure, install, configure, and sustain all network components on a base network.
3.3.3. Network Design: The Contractor shall design/review/advise components that are part of the base network and provide architectural drawings/implementation plans/project support agreements/requirement documents to ensure AMC/A6 supports MAJCOM worldwide mobility operations dependent upon network applications.
3.3.4. System Modifications: The Contractor shall develop, process, and submit system Change Requests to the appropriate agency. The Contractor shall be capable of working directly with product vendors and network operators, ensuring new technologies are deployed as expected, and submit authorization letters to external agencies in support of certificate to operate.
3.3.5. Network Hardening: Implements patches and apply software updates IAW DoW directives (STIG, UCR, MUDG).
3.3.6. Power Systems: The Contractor shall evaluate, identify, and document changes regarding power for telecommunications and integrated data and video components/systems; evaluate the uninterruptible power supply (UPS) sizing and capabilities to support existing and future requirements.
Technical Skills and Certifications
· Experience designing and installing networks and/or components
· Background interfacing with Cloud Based Technology and Cloud Computing
· Server Virtualization and Administration background
· Understanding of both VoIP and Secure VoIP transport
· Provide and understand state-of-the-art Secure and Non-secure networking architecture Knowledge of Secure and Non-secure network transmission systems and applications (wired and wireless 812.11, Citizen Broadband Radio Services (CBRS), LTE)
· Understand interoperability issues between mixed types of network/equipment to include new technology dealing with the transmission of secure data (CSfC, Suite B)
· Understanding of IT programs/project management (cradle to grave) to include requirements validation, cost proposals, business case analysis, methodologies, system development life cycle (SDLC), and sustainment
· Familiar and understanding of Zero Trust architecture and implementation
· Demonstrate application of STIGs, software upgrades, and patches
· Configure/troubleshoot installed Cisco Identity Service Engine (ISE)
· CCNA is preferred, Sec+ is minimum requirement
3.4. Task 4 - Network Transport Engineering (Wired and Wireless): The Contractor shall provide support for wired and wireless technology utilized on the BAN to include fiber optics, Ethernet, and multiplexing systems. The Contractor shall provide ongoing network support for IT engineering, network administration, analyze initial symptoms of network problems (first-line support), provide advanced technical troubleshooting and analysis (second-line support), engineering and network architecture. The Contractor shall demonstrate abilities to analyze network equipment, including the operating systems, integration and testing, and cross functional work experience to facilitate support of multiple IP-Multimedia Subsystem (IMS), which defines the functional architecture for a managed IP-based network. The Contractor shall also be able to participate in device performance/network user testing, evaluate new products/devices and software protocols for various regions within the command, and participate in working groups, technical conferences, and meetings as required. The Contractor shall reference and implement network standards (Base Area Network - BAN), configuration and AF Waiver requests, Quality of Service, VPN technology, EVoIP, Wireless distribution (alternative to fiber), Suite B, RMF and Wireless applications. The goal is to ensure the smooth operation of wired/wireless communication networks in order to provide maximum performance and availability for the users. Specific task activities include those outlined below:
3.4.1. Engineering Support: Provide overall network engineering support for a broad range of initiatives to include Zero Trust architecture. Tasks may include planning, designing, security, and evaluating various components of the network and network transport.
3.4.2. Maintenance Coordination: Coordinate the maintenance of complex data, voice or video network hardware and systems; investigate and resolve complex network and hardware matters of significance; research, assess and evaluate current and future systems; provide technical support and guidance on network design issues.
3.4.3. Network Design and Analysis: Coordinate with agencies to validate wireless and wired network design and implementations ensuring mission support to MAJCOM worldwide mobility operations to include TWCF facilities dependent upon network applications. Analyze modeling design work determining if the technical solution allows for continuous operation of networks for C2 users. Evaluate wireless technology to designated areas and facilitate on AMC installations. Understand how to use the Consolidated Infrastructure Planning System (CIPS) to extract base specific information to analyze man hole duct system and other transport infrastructure to support various new mission requirements.
3.4.4. Power Systems: The Contractor shall evaluate, identify, and document changes regarding power for telecommunications and integrated data and video components/systems; evaluate the uninterruptible power supply (UPS) sizing and capabilities to support existing and future requirements.
Technical Skills and Certifications
· Wireless and wired network technology
· Understand State of the Art Networking Architecture
· Broad understanding of Comply to Connect (C2C), Zero Trust (ZT)
· Oversee wired and wireless installations in base networks (integration, configurations and architecture)
· Knowledge of network transmission systems and applications (wired and wireless)
· Understand interoperability issues between mixed types of network/equipment to include wired and wireless network equipment
· Knowledge of new technology to enhance and expand network use of UC in Air Force and MAJCOM architecture
· Understanding of system/program management (cradle to grave) to include requirements validation, cost proposals, business case analysis, and sustainment
· Has experience using CIPS
· Has experience and knowledge of high-speed transport to include Passive Optical Network (PON), and Dense Wavelength Division Multiplexing (DWDM)
3.5 Task 5 – Network Planning Analyst (Command and Control): The Contractor shall review and analyze factors and assist with resolving problems influencing the planning, design, implementation, operation and maintenance of the AMC C2 systems and infrastructure. The Contractor shall evaluate new/emerging technology and evaluate possible architectural changes that meet all requirements (Unified Communications, IP Radio Systems, WAVE, voice recording equipment, and conference systems). The Contractor shall evaluate, integrate and implement systems and network components based on DoW/AF instructions and guidance consistent with emerging technology and industry practice. The Contractor shall have extensive experience with operating, maintaining, and replacing complex multicast video, ad hoc technical solutions, and Public Address Systems (i.e. Giant Voice) used on AMC installations. The main goal is to enhance customer’s response capability, pervasive reach, message consistency, and rapid two-way communications. Specific task activities include those listed below.
3.5.1. Systems Analysis: The Contractor shall review and analyze existing and planned systems to ensure compliance with DoW/AF instructions, policies and guidance supporting AMC C2 facilities within CONUS and TWCF enroute OCONUS locations; analyze system functionality, interoperability, and integration of RF radio systems, VoIP, analog voice, video, alarms, and networks for use in the C2 facility; analyze the survivability of the systems deployed in the C2 facility to operate through various contingency operations.
3.5.2. Life Cycle Support: The Contractor shall analyze factors related to systems supportability and develop life-cycle support plans. Considerations for plan development will include the following factors:
3.5.2.1. Viability of system components: Analyze lifespan of system components and compare to expected lifespan for overall systems. Analyze requirements and provide feasibility studies to support C2 and Enroute Infrastructure. Consult on system projects used by Government personnel to develop policy and guidance.
3.5.2.2. Maintenance Support: Analyze maintenance support requirements throughout life cycle, to include changes required toward end of lifespan to maintain operations. Also include maintenance training requirements which incorporate industry best practices and standards. This includes all engineering support to develop the MAJCOM roadmap for moving all Enroute and base level systems to EoIP, and the increased reliance on SIPR.
3.5.2.3. Cost Analysis: Develop, compare, and forecast all costs associated with system(s) support. Include technical refresh/upgrades, maintenance, training, manpower, support methodology, and additional factors which will affect system support costs. This includes the reduction of independent communications systems to reduce overall sustainment costs.
3.5.2.4. Site Surveys: The Contractor shall participate as a member of site survey and system acceptance teams; assist in the development of Project Support Agreements (PSA) identifying site locations for equipment, civil engineer support requirements, and communications support requirements. The Contractor shall also function as a member of the system acceptance teams, validating the completion of the required systems tests and perform the necessary quality assurance checklists.
3.5.2.5. Program and Project Support: The Contractor shall provide support to MAJCOM C2 facilities through analysis, requirements, feasibility studies and strategy options on all new technology development and requirements, such as VoIP, Radio over IP, Radio integration into C2 systems, Voice recording equipment, administration and management systems, IP security systems, and IP technology incursion to include integration of UC into the TWCF C2 systems used by Government personnel to develop policy and guidance.
Technical Skills
· Air Force experience, DoW Experience and DOW/AF C2 Systems
· Systems and clients operating using Internet Protocol (IP) transport to include VoIP, VoSIP, ECVoIP
· Knowledge of Command Post Systems with integration of radio systems and media gateways to provide transport for audio and data
· Voice Recording equipment
· System management to include administration of networked systems
· Voice to include Secure and Non-Secure
· DoW Unified Communications Technology
3.6 Task 6 – Advanced Mobile Technology Specialist: The Contractor shall review and provide subject matter expertise, security, and engineering support for a variety of communications related initiatives, various mobile device management projects, and mobile device evaluations and configuration solutions.
3.6.1. The contractor shall maintain compliance with higher/competent authority standards when evaluating equipment or analyzing solutions. The contractor shall determine if solutions cannot meet current standards, and document change requests/waivers, as needed, through Government authority.
3.6.2. The contractor shall evaluate major end-user, edge equipment, and corresponding ancillary equipment with respect to current industry standard products. The contractor shall recommend solutions to replace or migrate to COTS products and practices, as appropriate. The contractor shall assist in researching and identifying new technology to meet mission requirements and forecasted to meet identified capabilities. Evaluation will consist of identifying devices, sources, pricing, availability, and selection documentation. The contractor shall support evaluation plans and device configurations.
3.6.3. The contractor shall analyze, understand, and support required tasks and processes required to integrate mobile (and associated) technology into existing systems or in conjunction with other emerging technologies. Architecture and design analysis are major tasks associated with integration, to include technical solutions. The contractor shall research, assist, produce, and support integration of technology through analysis and documentation establishing implementation/deployment plans of technology, to include planning for life cycle management. The contractor shall review and analyze factors related to systems supportability and recommend methods of providing system support over the system’s life cycle. Factors to be used in developing a recommended method of system support include the maintenance/replacement requirements of the supporting IT unit, projected manpower requirements to provide daily organic operation/maintenance, system testing (to include testing resources), deployment of new systems or integration into existing systems, and final decommissioning and disposal of system elements
3.6.4. The contractor shall perform all required duties related to IT systems, including documenting initiatives/projects and all tasks associated with certification of emerging technologies. Life cycle documentation and management are major tasks. Major aspects include (but not solely) system certification processing (i.e., C&A, DAA approval, etc.), system management plans (i.e., management and security plans, etc.), and documentation associated with broader and over-arching plans. The contractor shall also further support certification processing, including detailed actions associated with hardware and software (i.e., OS, application development and management), such as JITC (Joint Interoperability Test Command) and UC (Unified Capabilities) processes.
4. DELIVERABLES
4.1. Contractor Submission: Deliverables are to be transmitted with a cover letter, on the prime Contractor’s letterhead, describing the contents, electronically through email to the COR, and to any other destination(s) as required per the Government’s request. If necessary, the Contractor shall provide hard copy deliverables as required per the Government’s request. All deliverables shall be produced using recommended software tools/versions as approved by the Government. All reports shall be accomplished utilizing the MS Office Software Suite to include MS Project as required.
4.2. Deliverable Rights: All test materials, documents, notes, records, software produced by the Contractor under this PWS shall become the property of the U.S. Government, which shall have unlimited rights to all materials and determine the scope of publication and distribution. The Contractor shall be required to deliver electronic copies of all documents, notes, records and software to the Government quarterly and upon termination of the contract services or expiration of the contract period.
4.3. Monthly Status Report (MSR) A001: Monthly status reports shall include status of tasks, schedules, deliverables, current and cumulative task funding status (direct labor and travel funding status to be reported separately as required), outstanding issues, and proposed resolution approaches and actions to resolve any outstanding issues. Status of tasks shall include a summary description and schedule of all tasks completed during the reporting period, all tasks currently on-going during the reporting period and all known tasks assigned for future reporting periods. The monthly invoice shall be submitted simultaneously with the monthly status report and are both due NLT the 10th calendar day of the month following the reporting period. Monthly reports must still identify tasks accomplished under each individual task. Comment by BRAGG, PAMELA C NH-03 USAF AFMC OL-AMC/AFICC-KM/PMO: Why is “task order” being used here? Comment by VICKERY, RANDALL M CIV USAF AMC AMC/A64I: Changing to just task
4.4. Project Documents A002: The Contractor shall document the results of projects assigned by the government representative. The Contractor shall be capable of providing documented results in the form of letters of finding, technical assessments, PowerPoint briefings, position papers and/or trip reports based on actual task assigned by the government.
TABLE 4 - DATA DELIVERABLES TABLE
| Deliverables |
| Performance Objective |
| PWS Para |
| A001 |
| Monthly Status Report |
| 4.3 |
| A002 |
| Project Documents |
| 4.4 |
5. NON-PERSONAL SERVICES AND/OR INHERENTLY GOVERNMENTAL SERVICES.
The Government will neither supervise Contractor employees nor control the method by which the Contractor performs the required tasks. It shall be the responsibility of the Contractor to manage its employees and to guard against any actions that are of the nature of personal services or give the perception of personal services. If the Contractor feels that any actions constitute, or are perceived to constitute personal services, it shall be the Contractor’s responsibility to notify the Procuring Contracting Officer (PCO) immediately. These services shall not be used to perform work of a policy/decision making or management nature, (e.g., inherently governmental functions). All decisions relative to programs supported by the Contractor shall be the sole responsibility of the Government.
6. GENERAL INFORMATION.
6.1. Kickoff Meeting: The Contractor shall initiate work by meeting with key Government agency representatives to ensure a common understanding of the requirements, expectations, and ultimate end products. The Contractor shall discuss the overall understanding of the project and review the background information and materials provided by the requiring activity. Discussions will include the scope of work, deliverables to be produced, how the efforts will be organized, and project conducted; assumptions made/expected and results. A concerted effort shall be made to gain a thorough understanding of the Government expectations. However, nothing discussed in this or in any subsequent meetings or discussions between the Government representatives and the Contractor shall be construed as adding, deleting, or modifying any task order requirements, including deliverable specifications and due dates. Travel to/from the kickoff meeting will not be reimbursed.
6.2. Period of Performance: The period of performance consists of a one-year base period with four one-year option periods.
6.3. Place of Performance: The place of performance shall be in Government facilities at Scott AFB. The Contractor shall perform task related activities, such as reach back support, at other Government sites and Contractor facilities within the local area when required and authorized by the COR or the CO. Teleworking is an option and will be handled on a case-by-case basis, but no recurring teleworking schedules will be permitted. Reimbursement for local travel is not authorized. Local travel is defined as any travel within 100 miles of Scott AFB. Classified work, if required, will only occur at a US Government facility or at another Contractor’s cleared facility.
6.4. Travel: The Contractor shall be required to travel in performance of this PWS. All travel arrangements shall be the responsibility of the Contractor, to include airline, hotel, and rental car reservations. Contractor travel is constructed as an Optional CLIN that can be executed as mission dictates. Travel location(s) and frequency of travel will be coordinated and authorized at the CO/COR’s discretion. Documentation for all contractor travel in support of this PWS must be completed. The contractor shall prepare and submit to the Government all required security access requests for the recommended TDY locations. The contractor shall prepare and submit Trip Reports within 10 working days after each trip. Comment by BRAGG, PAMELA C NH-03 USAF AFMC OL-AMC/AFICC-KM/PMO: If the contractor will be required to travel to perform the duties of this contract, then AMC/A6 will need to identify the anticipated travel requirements.
Do you need a paragraph similar to the one below?
The contractor shall prepare and submit Trip Reports IAW ?? guidance. Documentation for all contractor and subcontractor travel in support of this PWS must be completed. Trip report is due 10 working days after each trip. The contractor shall prepare and submit to the Government all required security access requests for the recommended TDY locations. Comment by VICKERY, RANDALL M CIV USAF AMC AMC/A64I: This has been a heated topic in the past versions of this contract. AMC’s travel plans shall be an optional CLIN since they change from year to year. We would like to have a blanket travel CLIN with a dollar amount of around $25K per FY and have the flexibility to plug in actual dates and locations as mission needs arise.
6.5. Hours of Operations: On-site Contractor support shall be available to the Government. Standard duty hours are 07:30-16:30 CST, Monday through Friday, excluding federal holidays. The Contractor shall provide for non-standard duty hours support on an as required basis. Non-standard duty hours or additional hours or times for work to be performed shall be coordinated with the COR.
6.6. Personnel Retention: The Contractor shall make every effort to retain personnel in order to ensure continuity until contract completion. If it should become necessary to substitute or replace personnel, the Contractor shall immediately notify the COR in writing of any potential vacancies and shall submit the resume(s) of replacement personnel and/or generic resumes for all other vacancies within 14 calendar days of the notification. The Contractor shall provide resume(s) of replacement candidates for personnel positions for validation of skill sets to the COR and CO through email for Government review and acceptance/rejection. Government approval will be based solely on whether the candidate meets the minimum qualifications required by the contract. The Government will express no preference between multiple minimally qualified candidates. Upon Government acceptance of a personnel resume(s), the vacancy shall be filled within 14 calendar days. The Contractor shall ensure continuity of operations during periods of personnel turnover and long-term absences. Long-term absences are considered those longer than two weeks in duration. The Government reserves the right to not pay for a position where, due to vacancies, duties are not being performed for longer than one month.
6.7. Organizational Conflict of Interest (OCI): The Contractor shall immediately notify the CO, if during the performance of the Contract, it becomes aware of any circumstance where its personnel or subcontractors may have a conflict of interest. In such circumstances, the Contractor shall propose a conflict-of-interest mitigation plan offering suitable processes for alleviating situations that may lead to conflict of interest situations or the appearance of conflict of interest. The Contractor is cautioned that there may be instances where actions it takes under this contract may preclude it from proposing on request for proposals in support of related activities of as a result of performance on this contract.
7. GOVERNMENT FURNISHED EQUIPMENT/INFORMATION/ACCESS.
7.1. The Government will provide the following resources, as available, to the Contractor for task performance:
· The Government will make available workspace at a Government facility for Contractor employees, as required to support the Contractor’s proposed staffing plan, at Scott AFB, IL.
· The Government will make available all necessary normal office equipment (office work area, telephone, access to fax, computer, printer, e-mail account, software, base network access, etc.).
· The Government will provide photo identification, such as Common Access Card (CAC) and Restricted Area Badge (as required). The Contractor shall comply with all requirements necessary to obtain a CAC and Restricted Area Badge.
· All Government-provided products and facilities remain the property of the Government and shall be returned upon completion of the support services. Contractor personnel supporting this requirement shall return all items that were used during the performance of these requirements by the end of the performance period.
· The Government will provide access to strategic vision, process, and procedures information; CONOPS; road maps; and technical information as required for the performance of this task order.
· LIMITED USE OF DATA. Performance of this effort may require the Contractor to access and use data that is propriety to a government agency or government Contractor, which is of such a nature that its dissemination or use other than in performance of this effort would be adverse to the interests of the government and/or others. Thus, Contractor personnel shall not divulge or release data or information developed or obtained in performance of this effort until made public by the government, except to authorize government personnel or upon written approval of the Contracting Officer (CO). Contractors shall not use, disclose, or reproduce proprietary data that bears a restrictive legend, other than as required in the performance of this effort.
| *All of the above Section 7 is NOT considered Government Furnished Property (GFP) as traditionally defined in the RFO/D-RFO and as such, does not require the reporting associated with actual GFP. | Comment by BRAGG, PAMELA C NH-03 USAF AFMC OL-AMC/AFICC-KM/PMO: All FAR and DFARS references should be changed to RFO and D-RFO. |
| 8. SECURITY | Comment by BRAGG, PAMELA C NH-03 USAF AFMC OL-AMC/AFICC-KM/PMO: Rob Calcagno (AMC/IP) needs to review the Security section of the PWS and make appropriate changes to it. |
| 8.1. Clearance: All Contractor personnel shall be United States citizens and shall possess a minimum of a SECRET security clearance. A DD Form 254, Department of Defense Contract Security Classification Specification will be required. All Contractor personnel shall comply with established security procedures for entering an installation and its facilities, including special security procedures for entry to restricted or controlled areas. The Contractor shall obtain the necessary badges, etc., for entry to restricted or controlled areas, if necessary, to meet the requirements of this PWS. Assigned contract personnel will not have any open JPAS issues/comments prior to working PWS tasks. | Comment by CALCAGNO, ROBERT C CIV USAF AMC AMC/IP: Delete, replace and renumber with the following: SECURITY. The contractor and all contractor personnel shall abide by all DAF and local rules, procedures and standards of conduct. A Department of Defense Contract Security Classification Specification (DD Form 254) is required for access to classified material. The contractor shall also perform IAW 32 CFR part 117. The contractor will be given access to applicable documentation to include requirements, plans, specifications, studies, and analyses up to and including SECRET classification. |
Security Clearance. Contractors working on this contract will be required to access classified information up to the Secret level. All contractor personnel working on the contract are required to have a minimum of a Tier 3 Security Investigation with “SECRET” eligibility and be currently enrolled in Continuous Vetting to perform work on this TO. Contractor personnel shall have at least an “interim “SECRET” access security clearance and accepted by Director/Commander within 30 calendar days of task order award. Classified work performed under this contract will be conducted in a secure environment. Once contractor’s security eligibility is verified, Government will give contractor access to applicable Government facilities from the commencement of the contract until completion. Some AMC missions are highly sensitive/limited need-to-know and occur with little or no notice. Contractor personnel shall comply with AMC, USTRANSCOM, 618 AOC, and installation commander security requirements. The contractor shall also complete visit requests for each individual that will be performing work on the contract in the Defense Counterintelligence Security Agency (DCSA) Defense Information System for Security (DISS) prior to performance start date. The prime contractor shall ensure that any teaming partners or subcontractors (if approved by the GCA) have the appropriate clearances prior to beginning performance. Prior to being granted access to classified information, contractor/sub-contractor employees will be required to sign the SF Form 312, Classified Information Nondisclosure Agreement (NDA). If the Contractor is notified by any Government official having security cognizance over the contract that an employee’s Security Clearance has been revoked or suspended, the Contractor shall notify the Government the same day as the Contractor receives the notice.
Contractor Consent to Background Checks. Contractor shall not employ persons to perform under this TO if such employee is deemed or identified by the installation as a potential threat to the health, safety, security, general well-being, or operational mission of the installation and its population, nor shall the contractor or subcontractor employ persons under this TO who have an outstanding criminal warrant as identified by DataMax through the National Crime Information Center. DataMax checks will verify if a person is wanted by local, state, and/or federal agencies. All contractor and subcontractor (if approved by the GCA) personnel must consent to DataMax background checks. If contractor/subcontractor personnel who do not consent to DataMax check will be denied access to the installation. Information required to conduct DataMax check includes: full name, driver’s license number, and/or social security number, date of birth of the person entering the installation, and completion of a background check questionnaire. Contractor must have this information ready to provide to the Installation Visitor Control Center, if requested.
Industrial Security Requirements. Contractor shall comply with 32 CFR part 117, DODM 5220.32 Volume 1_DAFMAN 16-1406 Volume 1, DoDM 5200.01, Volume 1_DAFMAN 16-1404 Volume 1, DoDM 5200.01, Volume 2_DAFMAN 16-1404 Volume 2, and DoDM 5200.01, Volume 3_DAFMAN 16-1404 Volume 3, DoDI 5200.48_DAFI 16-1403, and DAFI 16-1402. Facility and employee security clearances are obtained according DoDM 5220.32 Volume 1_DAFMAN 16-1406 Volume 1 and DoDM 5200.02_DAFMAN 16-1405. This manual includes specific requirements for the handling of classified information, security clearance, control of areas, visitor control procedures, Sub-Contractors, vendors and suppliers, consultants, parent-subsidiary and multiple facility organizations, sensitive compartmented and Communications Security (COMSEC) information, overseas operations, security requirements for automated information systems, and operations security (OPSEC). This includes clearance procedures, visitors, and inspections.
Safeguarding Classified Information. This TO deals with classified information. Contractor personnel must meet Air Force standards for storing, processing, handling, and marking and derivative classification of classified information and systems. Additionally, all classified resources (e.g. maps, publication/instructions, photos) provided by the Government to assist Contractor personnel in the performance of this TO will be surrendered upon termination of employment or the end of the TO performance period. Contractor personnel shall not store any classified information at their company location or laptops.
Security support provided by the Air Force to the contractor to include storage containers for classified information/material, use of base destruction facilities, classified reproduction facilities, use of base classified mail services, security badging, base visitor control, investigation of security incidents, base traffic regulations, the use of security forms, and conducting inspections required by 32 CFR part 117, and DoDM 5220.32, Volume 1_DAFMAN 16-1406, Volume 1.
Security support requiring joint Air Force and contractor coordination includes packaging classified information, mailing and receiving classified materials, implementing emergency procedures for protection of classified information, security checks, and internal security controls for protection of classified material and high value pilfer able property.
Safeguarding Unclassified and/or Controlled Unclassified Information (CUI). Contractor must meet Air Force standards for storing, processing, and handling controlled, unclassified information and systems, IAW DoDI 5200.48_DAFI 16-1403. Additionally, all resources (e.g. maps, publication/instructions, photos) provided by Government to assist contractor personnel in the performance of their contract will be surrendered upon termination of employment or the end of the contract performance period. The Government will take reasonable steps, by controlled access and need-to-know procedures, to protect against public release of attribution information of the contractor. The Government may use and disclose reported information that includes attribution information only on a need-to-know basis to authorized persons for cyber security and related purposes (e.g., in support of forensic analysis, incident response, compromise or damage assessments, law enforcement, counterintelligence, threat reporting, and trend analysis). The Government may disclose attribution information to support contractors that are supporting the Government's cyber security and related activities if the support contractor is subject to legal confidentiality requirements that prevent any further use or disclosure of the attribution information. The Government agrees to consider available exemptions of the Freedom of Information Act to protect against disclosure of attribution information of the contractor to unauthorized persons. Within a reasonable period, necessary to perform an analysis after completion of the assessment, all contractor proprietary information or third-party proprietary information in the possession of the Government as a result of the assessment will be destroyed unless other disposition is agreed upon in writing by the Parties or is required by law, Executive Order or regulation.
Training. All personnel shall complete required training as prescribed IAW with the instructions listed in the above paragraphs. All required training can be found within DAF e-Learning, https://lms-jets.cce.af.mil/moodle/ or training develop by the local Wing Information Protection Office.
List of Employees. The contractor shall maintain a current list of employees and deliver it monthly. The list shall include employee's name, social security number, and level of security clearance. The list shall be validated and signed by the company Facility Security Officer (FSO) and provided to the Unit Security Assistant 30 days prior to the service start date. Updated listings shall be provided when an employee's status or information changes. A Visit Request for all employees with a security clearance is required to be sent through the Defense Information System for Security (DISS) or successor system and must be updated at least annually. The contractor shall notify the Unit Security Assistant 30 days before on-base performance of the service. The notification shall include:
Name, address, and telephone number of company management representatives.
The TO number and contracting agency.
The highest level of classified information to which employees require access.
The location(s) of service performance and future performance, if known.
The date service performance begins.
Any change to information previously provided under this paragraph.
8.2. Contractor Consent to Background Checks: The Contractor shall not employ persons to perform under this contract if such employee is deemed or identified by the Air Force as a potential threat to the health, safety, security, general well-being or operational mission of the installation and its population, nor shall the Contractor or subcontractor employ persons under this contract who have…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .