SOW.pdf
PDF 8 KB Posted
- Attached to
- Travis AFB - Nitrogen Generator servicing
- Solicitation number
- FA442726Q1003
About this file
This Statement of Work (SOW) details annual and 2000-hour maintenance requirements for a Stationary Nitrogen Generator at Travis Air Force Base, specifically for a BAUER Compressors SNGII-MVT model. The contractor must provide OEM certified technicians to perform comprehensive servicing, which includes replacing numerous specific service parts such as oil removal cartridges, dryer cartridges, oil filters, v-belts, synthetic oil, valve components, filter elements, and an oxygen monitor sensor cell.
Special requirements mandate changing purification filters, oil and oil filters, replacing and calibrating the oxygen sensor, checking safety shutdowns, conducting a complete systems check, and performing an NFPA air test with certification. The contractor must be a certified BAUER service supplier and will coordinate with equipment custodians to replenish inventory of servicing items. The scope of work emphasizes precise technical maintenance to ensure optimal performance of the nitrogen generation equipment at the 60 MXS/MXMTA unit.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work (SOW) for Wheel & Tire
Travis AFB, 60 MXS/MXMTA, Stationary Nitrogen Generator servicing:
BAUER Compressors, SNGII-MVT
The purpose of this statement of work is to define the services and parts that must be supplied by the servicing vendor for our Stationary Nitrogen Generator.
Description: The contractor shall perform the annual and the 2000 hour service in accordance with the manufacturers recommendations found in the equipment manual.
The contractor shall provide OEM certified technician(s) qualified to perform maintenance, repair or servicing on this specific model/type.
Service Parts: The contractor will source and replace the following service parts:
058823A Oil Removal Cartridge
058826A Dryer Cartridge
N25326 Oil Filter Element
BET-0100 x2 Main Drive V-belts, 50 Or 60 Hz Drive
OIL-0024/GAL x2 Synthetic Oil
061858 Oil And Water Separator Element, Small
061859 Oil And Water Separator Element, Large
N04586 O-ring For Oil And Water Separator
N15273 x2 Intake Valve
N15274 x2 Discharge Valve
81409 x2 Intake Valve
14121 x2 Discharge Valve
GKT-BK15.3II Gasket, O-ring and Seal Kit
ELM-0185 Pre-coalescer Filter Element
ELM-0186 Post-coalescer Element
ELM-0187 Activated Carbon Filter Element
VAL-0376 x3 Internal Filter Bowl Automatic Drain Valve
IND-0028 Oxygen Monitor Sensor Cell
R-0771 Air Filter Element
R-0333 Oil Filter Element
R-12101 Air / Oil Separator Element
OIL-0007/GAL x2 Synthetic Oil
Point of Contact: The contractor shall coordinate with current and future equipment custodians of 60 MXS/MXMTC or MXMTA to replenish inventory of servicing items
(wheel bearings etc).
Special Requirements: The servicing will include changing the purification filters, oil & oil filters, replace and calibrate the oxygen sensor, checking of the safety shutdowns, complete systems check, and NFPA air test with certificate.
Qualifications/Certifications: The contractor shall be a certified BAUER service supplier
File details come from the government source that posted it. Updated .