SPECIFICATIONS.DOC

DOC document 115 KB Posted

Attached to
Crack Seal Machine Federal contract opportunity
Solicitation number
FA4427-18-Q-0103
Issued by
Department of the Air Force Air Mobility Command

View the file

Other files for this federal contract opportunity

Other files attached to Crack Seal Machine, newest first.
File Type Posted
FedBizOpps_Combo.docx DOCX document
Contract_Security_Clause_(Add_as_Attachement_to_all_Solicitations).docx DOCX document

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DEPARTMENT OF THE AIR FORCE

60TH CIVIL ENGINEER SQUADRON (AMC)

SPECIFICATIONS

FOR

CRACK SEAL MACHINE, DIESEL FIRED, PULL TYPE

The equipment to mix and apply single component Deery PLF-210 rubberized asphalt shall be mounted on a trailer equipped with lights and safety working lights. Also, has a 3” pintle type hitch that shall be adjustable from 18 to 30 inches.

A swing type boom arm shall be located on the rear of the unit to support the applicator hose during operation.

The holding tank shall have a minimum capacity of 110 gallons and be indirectly heated by an oil chamber, minimum 20 gallon capacity. The oil jacket shall wrap around 100% of the sides and bottom of the material.

The melting rate shall be a minimum of 80 gallons per hour bringing the material to an operating temperature and circulating through the wand in a one hour period.

Asphalt material pump shall be capable of delivering sealant at a rate that exceeds the melt rate of the unit. The flow rate shall be adjustable from zero to full flow.

Pump shall be reversible.

The equipment shall be fueled by diesel fuel with a minimum of 25 gallon fuel tank.

The unit shall have a thermostatic control device that will automatically regulate hot oil and material temperature. The thermostat shall control burner ignition for temperatures between 200ºF and 500ºF.

Mixing operation shall be accomplished with a vertical paddle type agitator powered hydraulically and be reversible.

The unit shall have a thermostatic control device that will automatically regulate hot oil and material temperature. The thermostat shall control burner ignition for temperatures between 200ºF and 500ºF.

The unit shall be equipped with electric overnight heating elements to aid in keeping product warm overnight.

File details come from the government source that posted it.