821_CRSS_Vehicle_SOW.docx

821 CRSS Vehicle SOW

Statement of work for installation of blackout lights, fire extinguishers, one (1) M4 weapon rack for driver’s side, and 120 volt outlet installed to twenty one (21) Ford F350 trucks.

· All vehicle lights inside and out must be able to turn on/off by Aux 1 toggle switch.

· All Blackout lights must turn on/off by Aux 2 toggle switch.

· All blackout lights will be provided by the government

· Twenty one (21) Driving lights (NSN 6220-014-96-1925) will be provided by the government and mounted to the brush guard. No wire harnesses or hardware will be provided and must be included in contractor’s quote.

· Front IR Illumination/Driving LED installation information: (1) IR LED with PAR46 style housing to be cut-into existing customer provided Bull-Bar, Driver's side upper most outboard position on the inside of the vertical and horizontal cross-bars.

· Forty two (42) Front marker lights (NSN 6220-011-56-4475) will be provided by the government and mounted to the brush guard. No wire harnesses will be provided and must be included in contractor’s quote.

· Front lighting installation information: (2) IR marker lights to be inserted into existing Bull-bar lower flat horizontal cross-bar, one driver's side 13" in from vertical bar

· Forty two (42) Rear maker lights (NSN 6220-011-56-4476) will be provided by the government and mounted to the brush guard. No wire harnesses will be provided and must be included in quote.

· Rear lighting installation information: (2) IR marker lights to be cut-into existing OEM bumper, Driver/Passenger sides, directly above existing tow-hooks installed on vehicle

· OEM upfitter switches already installed on vehicle will control the above lighting. The 4 OEM Switches are installed on Dashboard of all vehicles in sequence 1-4 Aux. Aux switches must be wired to control lights in this sequence. Aux Switch 1 will turn off all factory inside and outside vehicle lighting. Aux 2 switch activates all installed lights for black out operations (2) Front IR marker and (2) Rear IR marker; (1) Front Facing IR Illumination/Driving. Aux switches 3 and 4 will not be utilized and will remain unused.

· Twenty one (21), five (5) pound vehicle fire extinguishers will be provided by the government. Contractor must provide all mounting and hardware and must be included in quote.

· Contractor must provide twenty one (21) Setina Single Weapon Mount and electronic lock with key override – Single T-Rail with 'Vault-Lock' mount to keep continuity with other base assets. Mount to driver side door or drivers immediate right of the Steering wheel. The government will not provide anything for weapon locks must be included in in quote.

· Install a 120v outlet to interior of truck on dash near Aux switches. The government will not provide anything for the outlet; therefore it must be included in quote.

· Install spray Bed liner for all twenty one (21) vehicles.

No work shall be conducted on Travis AFB, CA. The government will deliver all twenty one (21) trucks to the contractor’s place of business two (2) vehicles at a time if the contractor’s place of business is within a 25 mile radius of Travis AFB, CA 94535. No more than two vehicles are to be removed from Travis AFB at a time; therefore, once both vehicles are complete the government will deliver two more vehicles. If the contractor’s place of business is further than 25 miles, the contractor shall arrange delivery/shipment of all vehicles to and from the contractor’s place of business two (2) vehicles at a time. All vehicles must be transported and not driven to the contractor’s location. Any costs associated with delivery/shipment shall be included in the contractor’s quote. Additionally, per Air Force Instruction 24-301, Government Owned Vehicles cannot be taken outside a radius of 75 miles from Travis AFB; therefore, the vendor shall not perform any work on the vehicles outside a 75 miles radius of the Air Force base.