Atch-05 FA441825Q0082 - NAVCONBRIG Bambu X1C 3D Printers - Salient Characteristics rev 1.pdf

Salient Characteristics

Naval Consolidated Brig Charleston is requesting to order the Bambu Lab XI-Carbon Combo Deluxe Print Fann Bundle - 12 Printers and Accessories. This equipment will allow us to expand our capabilities when making plaques, signs and emblems for various DOD Commands.

12 Printers and Accessories to include:

Item Quantity

1. Bambu Lab X1-Carbon Combo Deluxe Print Farm Bundle - 12 Printers and Accessories 1

2. Bambu Lab AMS – Automatic Material System 24

3. Bambu Lab Heatbed Sensor Unit – X1 & P1 Series 1

4. Bambu Lab Heatbed signal cable – X1 Series & P1P 1

5. Bambu Lab Activated Carbon Air Filter – X1 Series & P1S 36

6. Bambu Lab Cable Chain Assembly - X1 & P1 Series 1

7. Bambu Lab Ceramic Heater (3 pcs) 6

8. Bambu Lab Hardened steel Extruder Gear Assembly – X1 & P1 Series 1

9. Bambu Lab Front housing Assembly – X1 series 6

10. Bambu Lab X1 series MC / Machine Controller Board 1

11. Bambu Lab TH Board set V9 – Dual Red laser – X1 Series 12

12. Bambu 3D effect sheet – Galaxy (set of 2) 1

13. Bambu Lab CMYK LED Backlight board with PRO Series PLA 1

14. Bambu Lab Maker’s Essential Kit A 1

15. Bambu Lab X1C Complete Hotend Assembly – Stainless Steel nozzle – 0.20mm 36

16. Bambu Lab X1C Complete Hotend Assembly – Stainless Steel nozzle – 0.40mm 1

17. Bambu Lab X1-Carbon (No AMS) – Professional Bundle 1

18. Bambu Lab AMS – Automatic Material System (Add-on Item) 1

19. Bambu Lab AMS 2 Pro – Automatic Material System (Add-on Item) 1

Requirements:

Here are the key requirements for the Bambu Lab XI-Carbon Combo Deluxe Print Farm Bundle -

• Minimum Build Volume: 256 x 256 x 256 mm).

• Filament Diameter: 1.75 mm.

• Supported Filaments: PLA, PETG, TPU, ABS, ASA, PVA, PET.

• Max Build Plate Temperature: l I0°C@220V, 120°C@l l0V.

• The AMS enables printing with up to 4 different colors/materials simultaneously.

• Automatic filament changing when one spool runs out.

• Automatic filament identification with RFID-enabled Bambu Lab filaments.

• Filament tangle detection.

• Integrated humidity sensor and airtight seal to keep filaments dry.

• Dual auto bed leveling for precise first layers.

• Lidar sensor for first layer inspection.

• Spaghetti detection to prevent print failures.

• Monitoring and Control:

• . 5-inch color touch screen for control.

• Offline printing via microSD card.

WIFI

Frequency Range: 2400 MHz - 2483.5 MHz

WPA2-Enterprise:

No

ETHERNET

N/A

SUPPORTED FILAMENTS

PLA, PETG, TPU, PVA, BVOH: Optimal

ABS, ASA, PC, PA, PET: Ideal

Carbon/Glass Fiber Reinforced PLA, PETG, PA, PET, PC, ABS, ASA: Ideal

PPA-CF/GF, PPS, PPS-CF/GF: No

AMS 4-COLOR

Included with pfte tubes and accessories.

HEATING

Active Chamber Heating: No

Maximum Chamber Control Temperature: /

BAMBU X1C WITH

AMS SPECS

VENDOR MUST BE

AUTHORIZED TO SELL THIS

PRODUCT IN THE UNITED

STATES OF AMERICA.

AIR PURIFICATION

Pre-filter grade: None

HEPA filter grade: None

Activated Carbon Filter type: Coal Based Pelles

VOC Filtration: Capable

Particulate Matter Filtration: No

NETWORK CONTROL

Ethernet: No

Wireless Network: Wi-Fi

Network Kill Switch: No

Removable Network Module: No

802.1X Network Access Control: No

TOOLHEAD

Hot End: All-Metal

Nozzle: Hardened Steel

Max Hot End Temperature: 300℃

HEATED BED

Build Plate: Flexible Steel Plate

Build Plate Surface (Included): Bambu Textured PEI Plate / Bambu Cool Plate (Pre-installed, Random)

Max Build Plate Temperature: 110℃@220V， 120℃@110V

SPEED

Max Speed of Toolhead: 500 mm/s

Max Acceleration of Toolhead: 20000 mm/s2

SENSORS

Bambu Micro Lidar: Yes

Chamber Monitoring Camera: 1920*1080 Included

PHYSICAL DIMENSIONS

Dimensions: 389*389*457 mm³

Net Weight: 14.13kg