5. SOW-BEE Boat Repair.pdf

STATEMENT OF WORK

“BEE” BOAT REPAIR

General:

All components provided and installed by vendor must be compatible with the make and model:

• Aluminum Chambered Boats: 2004 Model: NOO24-04-2209

Service Will Include:

1. Removal of currently installed engines, fuel lines, wires, and steering system.

2. Repair and replacement of any damaged assemblies/connections pertaining to all parts removed by vendor.

3. Installation of all equipment IAW Performance Work Statement.

4. All equipment will be installed per manufacturers specifications.

5. Standards for new equipment will follow EPA guidelines for emissions.

6. Standards for safe boat operation will be IAW COLREGS .

7. The vendor will repair the "BEE' Boat at their facility.

8. The vendor will provide the transport of the "BEE" boat to and from their facility.

9. The vendor will provide a parts warranty IAW manufacturer specifications.

10. The vendor will provide a 12 Month Service Warranty.

Engines:

• 2 Each Engines IAW the following:

• 4-Stroke

• 150 House-power

• Stainless Steel Propellor

• Port Engine-Clockwise

• Starboard Engine- Counterclockwise

• Tilting motor for lifting engines

• Gasoline (typically ethanol free premium)

• Any color (Engines must be matching in color)

Steering:

• Provided steering components will be compatible with provided engines

• Components will be comprised of standard steering material rated for seawater contact.

• Components will be coated by a standard coating rated for seawater contact.

• See sketches below for placement reference

Wiring:

• The boat is 26 Feet in length.

• Wiring will connect Gauge cluster, VHF radio, Standard Navigation lights, Horn/loudspeaker, Trim motors, engine

• Wiring will be compatable with 2 separate Optima Bluetop 12V marine batteries (one for each engine) with manual paralleling capability

Fuel Lines:

• Fuel Type-Gasoline (typically ethanol free premium)

• System components be compatible with provided engines

• Material-Any seawater contact rated fuel system components.

Gauges:

• Gauges will be Digital LED

• Quantity and Size:

1 Each Fuel 2-1/8” (54mm) 2 Each Trim/Tilt 2-1/8” (54mm) 2 Each Water pressure 2-1/8” (54mm) 2 Each Voltmeter 2-1/8” (54mm) 2 Each Hour meter 2-1/8” (54mm) 2 Each Tachometers 3-3/8” (86mm).

(Will include trouble light cluster for “NO OIL” “HOT” “CHK ENG” and “LOW OIL”.) 1 Each boat speed gauge (Knots)

2 Each Engine RPM gauges (RPM) 2 Each Water temperature gauges (Degrees F) 2 Each Oil Pressure gauges (PSIG) 2 Each Run hours (hours to one decimal place)

2 Each Engine trim meters (visual UP/DOWN display)